Chevolink DS-1211ZC

Contents

Chevolink Zigbee Smart Light Switch User Manual

Model: DS-1211ZC

1. Product Overview

The Chevolink DS-1211ZC is a smart light switch designed for modern homes, offering convenient control of your lighting through APP control, voice commands, and traditional touch. It integrates with Zigbee and Tuya ecosystems, allowing compatibility with popular smart home platforms like Amazon Alexa and Google Home. This switch is designed to work in both neutral wire and no-neutral wire setups, eliminating the need for a capacitor in most no-neutral installations.

Chevolink Zigbee Tuya Smart Life switch features

Image 1: Chevolink Zigbee Smart Light Switch highlighting key features like no capacitor required and compatibility with Alexa, Google Assistant, Yandex Alice, and SmartThings.

2. Setup and Installation

2.1. Notes Before Installation

  • ZigBee Frequency: 2.4GHz
  • ZigBee Standard: IEEE 802.15.4
  • Only supports one-way/single pole circuits; not compatible with 2-way switches.
  • Can be used with or without a neutral wire.
  • This product does not have a relay function.
  • Basic electrical wiring knowledge or experience is required. If unsure, please consult a professional electrician.
  • The ON/OFF button can also be used as a reset button. Long press any key for 10 seconds to reset your smart switch to factory defaults. Only perform this if you are sure you want to erase all your settings.

2.2. Download App and Register

To control your smart switch, you need to download the 'Smart Life' app.

  1. Download: Scan the QR code below or search for 'Smart Life' in your device's app store (iOS App Store or Google Play Store).
  2. Register & Login: Open the Smart Life app. Follow the on-screen prompts to register a new account using your phone number or email, then log in.
  3. Create Family: In the app, create a 'Family' by entering a family name and selecting the rooms where your devices will be located.

2.3. Wiring Diagram

WARNING: Disconnect the power supply before performing any wiring work.

The DS-1211ZC smart switch supports both neutral wire and no-neutral wire installations. Please identify your home's wiring type before proceeding.

Wiring diagram for neutral and no-neutral wire setups

Image 2: Basic wiring comparison between 'Need Neutral' and 'NO Need Neutral' configurations.

This method provides the most stable operation.

  • Live Wire connects to the 'L' terminal.
  • Bulb Wire connects to the 'L1' (for 1-gang), 'L1, L2' (for 2-gang), or 'L1, L2, L3' (for 3-gang) terminals.
  • Neutral Wire connects to the 'N' terminal.

2.3.2. Wiring without Neutral Wire (No Capacitor Required)

This switch is designed to operate without a neutral wire and typically does not require a capacitor.

  • Live Wire connects to the 'L' terminal.
  • Bulb Wire connects to the 'L1' (for 1-gang), 'L1, L2' (for 2-gang), or 'L1, L2, L3' (for 3-gang) terminals.

Important Note:

  • When using the single-fire switch, the output must be connected to a bulb.
  • If the power of the bulb is less than 3W, do not leave any output empty.
  • If bulbs flicker, dim, or the switch is unstable, first try to connect a neutral wire. If a neutral wire is not available, ensure your bulb is compatible or consider using a bypass capacitor (though typically not needed for this model).

2.4. APP Connection

2.4.1. Connect APP to Smart Gateway (Hub)

Your Zigbee smart switch requires a Zigbee gateway (hub) to connect to the Smart Life app.

  1. Open the Smart Life app, tap 'Add Device', and find your Zigbee gateway in the 'Gateway Central Control' category.
  2. Reset your gateway device by long-pressing its reset button until the indicator light (green) stays on continuously.
  3. In the app, confirm that the gateway's indicator lights are on, then tap 'Next'. Ensure your mobile phone and gateway are on the same Wi-Fi network.
  4. Once the gateway is successfully added, tap 'Done'.

2.4.2. Connect Smart Switch to Gateway

  1. Ensure the smart switch is powered on. Press any switch button for 10 seconds until the red Wi-Fi indicator light flashes rapidly (this indicates pairing mode).
  2. In the Smart Life app, with your gateway connected, tap 'Add sub-device' and then tap 'LED is already blinking'.
  3. The device will connect automatically. Once connected, tap 'Done' to complete the process.

3. Operating Instructions

3.1. Functional Features

  • Ultra-low Power Consumption: The switch itself consumes less than 0.05W.
  • Timing Function: Set schedules to automatically turn lights on or off at specific times.
  • Power-on State Setting: Configure the switch's state after a power outage (Off, On, or Memory of previous state).
  • Indicator Light Control: Control the behavior of the LED indicator light (Off, On to indicate switch state, or On to indicate switch position).
  • Multi-control Correlation: Allows for advanced smart home automations.

3.2. Voice Control

Integrate your smart switch with voice assistants for hands-free control.

Smart speaker voice control with Alexa and Google Home

Image 3: Smart speaker voice control demonstrating commands for Amazon Alexa and Google Home.

  • Supported Devices: Amazon Alexa, Google Home, Tmall Genie, Yandex Alice, SmartThings.
  • Commands: Use simple commands like "Alexa, turn on the lights" or "Google, turn on the lights."

3.3. Backlight ON/OFF Option

You can control the backlight of the switch to create a comfortable sleeping environment.

Backlight ON/OFF option for the smart switch

Image 4: Visual representation of the switch with its backlight turned OFF and ON.

4. Maintenance

To maintain your Chevolink Zigbee Smart Light Switch, simply wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.

5. Troubleshooting

5.1. Common Issues and Solutions

  • Bulb Flickering/Dimming or Unstable Switch: This can occur if the bulb's power is too low (less than 3W) or if there's an incompatibility. First, try connecting a neutral wire if possible. If no neutral wire is available, ensure your bulb is compatible with smart switches.
  • Switch Not Responding: Check if the switch is properly wired and powered. Ensure your Zigbee gateway is online and the switch is within its range. Try resetting the switch (long press any button for 10 seconds) and re-pairing it.
  • App Connectivity Issues: Ensure your phone, gateway, and switch are all on the same network (for initial setup). Check your Wi-Fi signal strength.

5.2. User Tips

  • Old Wiring (No Neutral Wire): If your home has older wiring with only two wires (Live and Load) at the switch box, this smart switch is designed to work without a neutral wire. Follow the 'Wiring without Neutral Wire' instructions carefully.
  • Bulb Compatibility: For optimal performance, use LED bulbs designed for dimmable or smart switch applications. Avoid very low wattage bulbs (under 3W) if experiencing flickering.

6. Specifications

Product information and dimensions diagram

Image 5: Detailed product information including dimensions and specifications table.

FeatureSpecification
Brand NameChevolink
Model NumberDS-1211ZC
Item TypeSWITCHES
Is Smart DeviceYes
Switch TypeAPP Control
Current Rating10A
Power Rating3-600W
Input Voltage100-240VAC 50/60Hz
MaterialPC + Toughened Glass Panel
Wireless TypeZigbee (Note: Image also states IEEE802.11 b/g/n, which is Wi-Fi. Product is primarily Zigbee.)
Control MethodAPP Control/Voice Control
Control Operating Temperature-20°C ~ 50°C
Button Life100,000 times
Product Dimensions11.8 x 7.2 x 3.5 cm (4.65 x 2.83 x 1.38 inches)
Package Dimensions13.8 x 8.9 x 5.5 cm (5.43 x 3.5 x 2.17 inches)
OriginMainland China
CertificationRoHS, FCC, CE

7. Warranty and Support

7.1. Warranty

This Chevolink Smart Light Switch comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase.

7.2. Support

For further assistance, troubleshooting, or warranty claims, please contact the seller or retailer from whom you purchased the product. You may also refer to the detailed user manual PDF available at: User Manual (PDF).

If you are unsure about any electrical work, always consult a qualified electrician.

© 2024 Chevolink. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.