XIAOMI MQXJQ01KL

Contents

Xiaomi Mijia Lint Remover User Manual

Model: MQXJQ01KL

Brand: Xiaomi

1. Introduction

Thank you for purchasing the Xiaomi Mijia Lint Remover. This portable, USB-charging electric lint trimmer is designed to efficiently remove lint and fabric pills from your clothes, restoring them to a fresh, new look. Please read this manual carefully before use and keep it for future reference.

2. Safety Information

  • Before use, check the product for any damage. Do not use if damaged.
  • Do not use on clothes worn on the body.
  • Do not use compressed air, abrasive cleaners, or corrosive liquids (e.g., gasoline, acetone) to clean the product.
  • Do not rinse the machine with water; ensure it remains dry.
  • Keep out of reach of children, disabled, and incapacitated individuals.
  • If the power cord is damaged, it must be replaced with a special cord available from the manufacturer or its service department.
  • Do not use for purposes other than trimming clothes lint.
  • Do not trim fluff on stockings, as it may cause damage.
  • Do not trim fluff longer than 5mm on sweaters.
  • Lay clothes flat before use to prevent wrinkles and damage during trimming.

3. Product Overview

Familiarize yourself with the components of your Xiaomi Mijia Lint Remover:

  • Blade cover
  • Blade
  • Switch button
  • Lint compartment
  • USB charging interface
  • Indicator light
  • Micro-USB charging cable
  • Cleaning brush
Diagram showing the main components of the Xiaomi Mijia Lint Remover
Figure 1: Diagram showing the main components of the Xiaomi Mijia Lint Remover: blade cover, blade, switch button, lint compartment, USB charging interface, and indicator light.

4. Setup

4.1 Initial Charging

Before first use, fully charge the device. Connect the Micro-USB charging cable to the charging port and a compatible USB power adapter (DC5V1A). The indicator light will breathe white during charging and turn off when fully charged. Normal charging time is approximately 2 hours.

Lint remover with USB cable, showing charging setup
Figure 2: The Xiaomi Mijia Lint Remover with its Micro-USB charging cable, ready for initial charging.

4.2 Assembly

Ensure the blade cover and lint compartment are correctly installed before turning on the device. If not properly assembled, the lint remover will not start.

5. Operating Instructions

Press the switch button to turn the device ON/OFF.

5.1 Trimming Methods

  • Quick Trimming Method: Place the blade cover flat on the clothing. Gently slide the device left and right.
  • Removing Stubborn Lint Balls: For stubborn lint, slide the device vertically or parallel to the garment's texture.
  • Trimming Woven Patterns: For areas with woven patterns, slide the device in the direction of the pattern.
  • Thin Clothes: Fold thin clothes in half and place them on an ironing board or a hard, flat surface for trimming.
  • Clothes with Protruding Decorations: Slide around any protruding parts to avoid damage.
Lint remover in use, showing deep lint removal
Figure 3: The lint remover in action, demonstrating deep lint removal while protecting the garment.
Lint remover used on light and dark clothes
Figure 4: The lint remover being used on both light and dark fabrics, showing no color bleeding.

6. Indicator Lights

The device's indicator light provides information on power level and charging status:

Power Level Indicator Status
15% Orange flashes 3 times, then device forces shutdown.
16%-19% Orange solid
20%-100% White solid
Charging White breathing (turns off when full)

7. Charging

  1. Turn off the trimmer before charging. Charge in a dry environment at room temperature.
  2. Connect the charging cable to the charging port. Use a CCC-certified adapter or a standard power adapter that meets safety standards (sold separately).
  3. Ensure the voltage (DC5V1A) matches product specifications to avoid safety hazards and damage.
  4. During charging, the indicator light will show a white breathing state. It will turn off when fully charged. Normal charging time is approximately 2 hours.

8. Maintenance

  1. Turn off the power.
  2. Remove the blade cover.
  3. Remove the cutter head by pushing in the direction of the arrow.
  4. Clean the blade cover with the cleaning brush.
  5. Clean the blade with the cleaning brush.
  6. Clean the lint compartment with the cleaning brush.
  7. Remove and clean the lint bin.
  8. Reassemble the blade and blade cover in order. Be careful not to scratch your hands when disassembling/installing the cutter head. Do not press or hit the blade cover forcefully.
  • Wipe the body with a dry cloth.
  • Clean the lint bin when it is about 80% full.
  • The device body cannot be washed under running water. Keep the body dry.
Lint compartment removed, showing collected lint
Figure 5: The lint compartment is easily removed for cleaning, showing collected lint.
Internal view of the lint remover mechanism
Figure 6: Internal view of the lint remover, showing the blade and suction mechanism for deep lint removal.
Package of replacement blades
Figure 7: A package of replacement 5-blade floating heads for the lint remover.

9. Troubleshooting

If you encounter any issues with your device, refer to the table below for common problems and solutions:

Problem Cause Solution
Not working after power on Battery low Charge the machine
Blade cover not installed correctly Reinstall blade cover
Cutter head not installed correctly Reinstall cutter head
Blade deformed/damaged Replace cutter head
Poor lint removal effect Battery low Charge the machine
Severe lint accumulation Clean lint bin
Charging not normal Charging cable damaged Replace charging cable
Battery damaged Contact after-sales service

10. Specifications

Parameter Value
Product Name Xiaomi Mijia Lint Remover
Product Model MQXJQ01KL
Charging Time 2 hours
Rated Voltage DC3.7V
Rated Power 2W
Implementation Standards GB4706.1-2005, GB4706.9-2008, GB4343.1-2018
Package Dimensions (L x W x H) 15 cm x 8 cm x 6 cm
Package Weight 0.251 kg

11. Warranty and Support

This product's after-sales service strictly adheres to the 'Consumer Protection Law of the People's Republic of China' and 'Product Quality Law of the People's Republic of China'.

  • Within 7 days of receipt: If performance issues listed in the 'Product Performance Fault Table' occur, verified by Xiaomi after-sales service, you are eligible for free return or exchange.
  • Within 8 to 15 days of receipt: If performance issues listed in the 'Product Performance Fault Table' occur, verified by Xiaomi after-sales service, you are eligible for free exchange or repair.
  • Within 12 months of receipt: If performance issues listed in the 'Product Performance Fault Table' occur, verified by Xiaomi after-sales service, you are eligible for free repair.

For full details and the complete 'Product Performance Fault Table', please refer to the official user manual PDF: View User Manual (PDF).

12. User Tips

  • For best results, avoid moving the machine too quickly over the fabric surface. A gentle, steady motion is often more effective.
  • Regularly clean the lint bin and blades to maintain optimal performance and prevent clogging.
  • Consider purchasing spare blades for long-term use to ensure consistent trimming efficiency.

13. Frequently Asked Questions (FAQ)

Q: Can I buy spare parts for this lint remover?
A: Yes, spare blades are available for purchase. Please check with the seller or official Xiaomi channels for availability.
Q: Does the package include additional nozzles?
A: The standard package typically includes the lint remover, a Micro-USB charging cable, and a cleaning brush. Additional nozzles or blades may be sold separately or as part of specific bundles. Please check your product packaging or seller description for exact contents.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.