1. Introduction
Thank you for choosing the NOCCLILI V20 Electric Lint Remover. This portable and rechargeable device is designed to efficiently remove lint, fuzz, and hairballs from your clothing and fabrics, restoring them to a fresh, new appearance. Featuring a powerful motor, a six-bladed cutting head, and three intensity settings, it offers effective and gentle care for various materials without causing damage. Its compact design makes it ideal for both home use and travel.

2. Safety Precautions
Please read and understand all safety instructions before using the lint remover to prevent personal injury or property damage.
- Operate the device in a clean, well-ventilated area. Keep away from flammable, explosive, or corrosive substances.
- Keep out of reach of children and unauthorized personnel. Minors are prohibited from using this product.
- Do not overload or use the device beyond its specified capabilities.
- Always inspect the lint remover for any damage (e.g., cracked handle, deformed parts, jammed movable parts) before use. If any damage is found, discontinue use immediately and contact customer service.
- Do not disassemble or modify the core components of the device without authorization. Unauthorized modifications will void the warranty and may lead to product failure or injury.
- Avoid using the device under the influence of alcohol or when fatigued. Maintain focus during operation.
- Do not use the lint remover on wet fabrics or in damp environments to prevent electrical hazards and rusting.
- Ensure the fabric surface is clean and free of any hard objects (buttons, zippers, embellishments) that could damage the blades or mesh.
- Do not press the device too hard against the fabric, as this may damage the fabric or the device.
- Always ensure the collection bin is properly attached before operation.
3. Product Overview
3.1 Components
The package typically includes:
- NOCCLILI V20 Electric Lint Remover (Main Body) x 1
- USB Charging Cable x 1
- Cleaning Brush (may be included)
3.2 Key Features
- USB Charging Port & Long Battery Life: Equipped with a universal USB charging interface, compatible with mainstream adapters, power banks, and computers.
- Efficient Hairball Removal: Features a six-bladed cutting head for effective removal of lint and fuzz without damaging clothing.
- Detachable Grille: Designed with a 35mm thickened steel mesh and 298 mesh holes of different calibers, making it easy to clean and maintain.
- 3 Gears of Intensity Adjustment: Allows you to select the appropriate intensity level for different fabric types.
- Compact and Portable: Small body design, easy to store and carry, perfect for travel.
- Powerful Motor: Quickly removes hairballs with sharp cuts, ensuring fast trimming, no residue, and low noise operation.


3.3 Specifications
| Parameter | Detail |
|---|---|
| Product Name | V20 Hairball Trimmer |
| Charging Method | Micro-USB |
| Battery Type | Lithium Battery |
| Rated Voltage | 3.7V |
| Gears | 3rd Gear |
| Product Weight | 150g |
| Size | 159 x 60 x 78 mm |
| Charging Time | Greater than 1 hour |

4. Setup
4.1 Initial Inspection
Upon unpacking, carefully remove the lint remover and all accessories. Check for any missing parts or visible damage. If anything is amiss, contact customer service immediately.
4.2 Charging the Device
Before first use, fully charge the lint remover. Connect the provided USB charging cable to the device's Micro-USB port and plug the other end into a compatible USB power source (e.g., computer, power bank, wall adapter). The charging indicator light will typically show the charging status. A full charge takes approximately 1 hour or more.

5. Operation
Follow these steps for effective lint and fuzz removal:
- Prepare the Fabric: Lay the garment or fabric flat on a hard, smooth surface. Ensure the fabric is dry and free of wrinkles. Remove any loose threads, buttons, or embellishments that could get caught in the blades.
- Turn On: Locate the power button (often integrated with gear selection) and press it to turn on the device.
- Select Intensity Gear: The V20 features 3 gears of intensity adjustment. Select a lower gear for delicate fabrics and a higher gear for tougher materials or stubborn lint.
- Apply to Fabric: Gently glide the lint remover over the affected area of the fabric. Apply light, even pressure. Avoid pressing too hard or holding it in one spot for too long, as this may damage the fabric.
- Move in Circular or Straight Motions: Move the device in small circular motions or straight strokes, depending on the fabric and the direction of the weave.
- Monitor Collection Bin: As you work, lint and fuzz will accumulate in the transparent collection bin. Periodically check the bin and empty it when it becomes full to maintain optimal performance.
- Turn Off: Once finished, turn off the device and ensure the blades have stopped rotating before handling.



6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your lint remover.
- Empty Collection Bin: After each use, or when full, detach the collection bin and empty the accumulated lint and fuzz.
- Clean the Grille and Blades: Carefully twist and remove the protective grille. Use the provided cleaning brush (if applicable) or a soft brush to remove any lint or debris from the inner side of the grille and around the blades. Be cautious as the blades are sharp.
- Wipe Down: Use a soft, dry cloth to wipe the exterior of the device. Do not use water or harsh chemicals.
- Storage: After cleaning, reassemble the device and store it in a dry, ventilated place, away from direct sunlight and extreme temperatures. Ensure it is protected from falls or pressure.

7. Troubleshooting
If you encounter issues with your lint remover, please refer to the following common problems and solutions:
- Device not turning on:
- Ensure the device is fully charged. Connect it to a power source and allow it to charge for at least 1 hour.
- Check if the power button is pressed correctly.
- Poor lint removal performance:
- Empty the lint collection bin if it is full.
- Clean the grille and blades to remove any trapped lint or debris.
- Ensure the protective grille is securely attached.
- Try a higher intensity gear for more stubborn lint.
- Device stops during operation:
- The battery might be low. Recharge the device.
- The collection bin might be full, or lint might be jamming the blades. Clean the device as per maintenance instructions.
- Unusual noise or vibration:
- Turn off the device immediately. Check for any foreign objects caught in the blades or between the grille and blades.
- Ensure the grille is properly aligned and secured.
If the problem persists after attempting these solutions, please contact customer service for assistance. Do not attempt to repair the device yourself.
8. Warranty and Support
This product is covered by a manufacturer's warranty. Please retain your proof of purchase for warranty claims.
- The manufacturer is not liable for product failure caused by force majeure (e.g., earthquake, fire, natural disasters), improper manual operation, over-specification/overload use, third-party damage, or accidental damage during cross-border transportation.
- The warranty becomes invalid if the product is damaged due to unauthorized disassembly or modification of core components, use of non-original accessories, or illegal repair.
- For any missing parts, damage, or issues not covered by troubleshooting, please contact the dealer or after-sales service for inspection and repair.
For further assistance, you may refer to the official user manual PDF available at: User Manual (PDF).
9. Disclaimer
The content of this manual is for guidance on the installation, operation, and maintenance of the NOCCLILI V20 Electric Lint Remover. Product parameters and functions may be slightly adjusted due to version updates. The actual product shall prevail. The manufacturer reserves the right to make changes without prior notice.