HZTZ HZ-8360

Contents

HZTZ 80mm Thermal Receipt Printer HZ-8360 User Manual

Model: HZ-8360 | Brand: HZTZ

1. Safety Precautions

This section provides important information to ensure safe and effective use of your printer.

WARNING:

  • Scratch Warning: Never attempt to touch the auto cutter or jagged teeth.
  • Scald Warning: To avoid burns, do not touch the printer head.
  • Shock Warning: Always cut off power before plugging or unplugging the power cable from the printer.

Cautions:

  1. Use the provided power adapter with a stable voltage (110-220V). Avoid using other devices on the same power outlet to prevent voltage fluctuations.
  2. Install the printer on a flat and stable surface to prevent vibrations and shocks.
  3. If water or other liquids spill into the printer, immediately unplug the power cord and contact your dealer or service center.
  4. Disconnect the power cord if the printer will be idle for an extended period.
  5. Ensure the power switch is in the "off" position before plugging in the power cord.
  6. Only qualified technicians should disassemble or repair the printer.
  7. Strictly follow the recommended use tips in this manual.

2. Product Overview & Specifications

The HZTZ 80mm Thermal Receipt Printer HZ-8360 is designed for reception, kitchen, and dining room environments, offering high-quality, high-speed printing with strong stability.

HZTZ Thermal Printer overview with key features
Figure 2.1: HZTZ Thermal Printer highlighting automatic cutting, 80mm print width, waterproof buttons, order reminder, and multiple interfaces (USB/Network/Bluetooth).

Key Features:

  • Automatic Cutting
  • 80mm Print Width
  • Button Waterproof
  • Order Reminder
  • Multiple interfaces: USB, LAN (Ethernet), Bluetooth

Detailed Specifications:

Feature Specification
Printer MethodLine Thermal
Print Speed300mm/sec (80-III type); 250mm/sec (80-II type)
FontsSimplified Chinese 24x24 point, support 18030 font library; support Taiwan and HK traditional (complex font), Korean and Japanese
Character Size576dot/line or 512dot/line ANK Character; Font A: 12x24dot, 1.5(W)x3.0(H)mm; Font B: 9x17dot, 1.1(W)x2.1(H)mm; Simplified/Traditional: 24x24dot, 3.0(W)x3.0(H)mm
Extended Character TableOEM437/Katakana/OEM850/OEM860/OEM863/OEM865 WestEurope/Greek/Hebrew/East Europe/Iran/WPC1252/OEM866/OEM852/OEM858/IranII/Latvian/Arabic/PT151,1251/OEM747/WPC1257/Vietnam/OEM864/Hebrew/WPC1255/Thai
Logo/TrademarkDownload and printing support
InterfaceSerial / USB / Ethernet / Bluetooth / WIFI (option)
Print CommandESC/POS Command
Roll Width79.5±0.5mm (Print Width 72mm)
Roll Diameter80mm
Paper Thickness0.06-0.08mm
Power SupplyDC24V/2.5A
Auto CutterFull/Partial Cut
Codes typeUPC-A/UPC-E/JAN13(EAN13)/JAN8(EAN8)/CODE39/ITF/CODABAR/CODE93/CODE128/
2D BarcodeQR CODE
Temperature0-45℃
Contrast Humidity10-80%
DriverWin2000/Win2003/Win XP/Win Vista/Win7/Win8/Win10/Linux
ApplicationFor Commercial
Max. Resolution203dpi
Black Print Speed200mm/sec
UseReceipt Printer
Battery IncludedNo
Signal Connection TypeBluetooth
Double-sided PrintingNo
Supports Network PrintingNo
Paper Feed ModeRoll Feed
Max Paper Size80mm
Typethermal receipt printer
Interface TypeUSB
OriginMainland China
Weight1.5kg
CertificationCE, FCC, RoHS

3. Setup Guide

3.1 Hardware Connection

Ensure all cables are connected correctly. This includes the power adapter, interface cables (USB, Ethernet, or Bluetooth), and the RJ-11 cable (if applicable for cash drawer). Open the cover and load the thermal paper roll.

Rear view of the printer showing ports
Figure 3.1: Rear view of the printer with USB, LAN, and power ports.
Top-down view of the printer with the paper roll compartment open
Figure 3.2: Loading thermal paper into the printer.

3.2 Driver Installation (Windows)

The printer supports drivers for Windows 2000/2003/XP/Vista/7/8/10/Linux. A CD with drivers is typically included. If not, drivers can be found via the link provided in the manual PDF or product advertisement.

  1. Insert the driver CD (or download from the provided link) and run the setup file.
  2. Select your preferred installation language (e.g., English) and click "Confirm".
  3. Follow the on-screen prompts, clicking "Next" to proceed through the installation wizard.
  4. During installation, you may be asked to select the printer model and connection type (USB, Ethernet, or Serial). Choose the appropriate options.
  5. If prompted, allow the installation of device software.
  6. After installation, navigate to your computer's "Devices and Printers" or "Printer properties" to verify the installation and configure ports.
  7. Perform a "Print Test Page" from the printer properties to confirm successful driver installation and printer functionality.

3.3 Bluetooth Connection

For models supporting Bluetooth printing:

  1. Ensure your device (e.g., laptop, tablet) has Bluetooth enabled and activated. The Bluetooth icon should be visible in your system tray.
  2. Power on the Bluetooth printer.
  3. On your computer, go to Bluetooth settings, click "Add a Bluetooth Device".
  4. Your computer will search for available Bluetooth devices. Once the printer (e.g., "HZ-8360") is found, select it.
  5. If prompted for a passkey, enter "1234" (default factory passkey). You can change this passkey in the printer's settings if desired.
  6. Once connected, note the assigned COM ports. You can test the connection using a COM tool (e.g., 9600, N, 8, 1 settings) or by printing a test page.

3.4 Ethernet IP Address Setting

For Ethernet interface models, the printer's IP address, subnet mask, and gateway may need configuration. This can be done via a web interface or a dedicated tool.

  1. Connect the printer to your computer using a crossover cable, or connect both to a router.
  2. Perform a self-test print by holding the "FEED" button while turning on the printer. Release "FEED" when the "PAPER OUT" indicator lights up. The self-test page will display the printer's current IP address (default: 192.168.1.100).
  3. Ensure your computer's IP address is in the same network segment as the printer.
  4. Open a web browser on your computer and enter the printer's IP address (e.g., 192.168.1.100).
  5. Log in (default username/password is often "admin").
  6. Configure network settings (IP, Subnet mask, Gateway, MAC) as needed and save.
  7. Restart the printer for changes to take effect.

3.5 WIFI IP Address Setting

For WIFI thermal printer models, configuration is done via a browser interface:

  1. Connect the printer to your PC and switch it on.
  2. Find and connect to the printer's wireless network (SSID).
  3. Open a web browser and enter the printer's IP address (e.g., 10.10.100.254).
  4. Log in (default username/password is often "admin").
  5. Select "AP+STA mode" and save.
  6. Go to "STA Setting" and click "Scan" to find available wireless networks.
  7. Select your desired network, enter the password, and save the configuration.
  8. Restart the printer module.
  9. Verify connection by pinging the printer's IP address from your computer's command prompt (e.g., `ping 192.168.1.105 -t`).

3.6 Android OS Operating Manual

For Android devices (supports USB, Ethernet, Bluetooth, and WiFi):

  1. Insert the driver CD into your computer and connect your Android device.
  2. Find the "SDK" file, then navigate to `BLUETOOTHDEMO -> bin -> BT-POSPrinter.APK` and install it on your Android device.
  3. Connect your Android device to the printer.
  4. Open the installed app, click "Connect Printer" to search for the Bluetooth printer. Use default pairing password "1234" if prompted.
  5. After successful connection, click "Print Test Page".
  6. For Ethernet, USB, or WiFi communication, replace `BLUETOOTHDEMO` with `NETDEMO`, `USBDEMO`, or `WIFIDEMO` respectively in step 2.

3.7 iOS APP Operating Manual

For iOS devices:

  1. Download the "POS-PrinterV1.0" app from the App Store.
  2. Enable Bluetooth on your iOS device and open the "POS-Printer" app.
  3. Within the app, select the paper width.
  4. Select the communication method (Bluetooth or WiFi).
  5. If connecting via Bluetooth, click "Select Printer" to search for and connect to the "Bluetooth Printer".
  6. If connecting via WiFi, ensure your iOS device is on the same network segment as the printer, then click "Connect" and enter the printer's IP address.

4. Basic Operation

4.1 Indicator Lights & Printer Status

The printer has three LED indicators: Power, Error, and Paper Out.

  • Power: Lights up when power is connected.
  • Error: Lights up when an error occurs (e.g., paper out, high temperature, print head carriage mal-position).
  • Paper Out: Indicates no paper.

4.2 Printer Operation

  • Switch On/Off: Press the switch to the "1" position to turn on, and "O" to turn off.
  • Paper Feeding: Press the "FEED" button to feed paper. Release to stop.
  • Self Printing Test: Turn off the printer. Press and hold the "FEED" button, then press the "POWER" button. Release both buttons when the "PAPER OUT" indicator turns on. The printer will print a test page with current settings.
  • Hexadecimal Printing: Turn off the printer. Press and hold the "FEED" button, then press the "POWER" button. Release the "FEED" button approximately 3 seconds after the "PAPER OUT" indicator turns off. The printer will enter hexadecimal printing mode. To exit, restart the printer.

4.3 APP Features (iOS/Android)

The mobile application provides additional functionalities:

  • Send HEX: Enter hexadecimal data in the text box and click "Send HEX" to print.
  • Print Image Mode: Input data, then click "Print Image mode" to convert text into an image and print.
  • Open Cash Drawer: If connected to a cash drawer, click "open casher" to open it (not applicable for portable printers without a drawer interface).
  • Cut Paper: Feeds and cuts paper (not applicable for 58mm printers without a cutter).
  • Self Test: Prints a self-test page.
  • Beep: Triggers a beep sound from the printer (not applicable for printers without a buzzer).

5. Maintenance

5.1 Cleaning the Printer

Clean the print head if you experience unclear printing, unclear columns, or noisy paper feeding.

  1. Turn off the power, open the printer cover, and remove the paper roll.
  2. If printing was recently completed, wait for a while for the print head to cool down.
  3. Use a soft brush or a cotton swab immersed in wrung-out ethanol to clean the print head. Ensure to turn the gear while lubricating for complete coverage.
  4. Close the cover after cleaning.

Cleaning Cautions:

  • Ensure the printer is powered off during maintenance.
  • Keep hands or metal tools away from the print head surface. Do not use tweezers to scratch the print head or other sensitive parts.
  • Do not use gasoline, acetone, or other organic solvents for cleaning the print head.

6. Troubleshooting

Common Issues and Solutions:

  1. Serial port printer printing messy code?
    A: Ensure the baud rate setting in the PC matches the printer's baud rate (check self-test page).
  2. Self-printing test is OK, but printer doesn't work after driver installation?
    A: Recheck installation steps, ensuring the correct port is selected. Contact service center if needed.
  3. Cash drawer doesn't open?
    A: Enable cash drawer function in device settings and check cable connection. Contact service center if needed.
  4. Malfunction of paper feeding?
    A: Clean the paper sensor with a soft brush. Try again or send for repair.
  5. Messy code printing after a period of time?
    A: Interface board may be damaged; replace or repair it.
  6. Malfunction of the indicator light?
    A: Check cable connections, adapter, power cord, and switch. Contact service center for repair.
  7. Ethernet printer doesn't print after linking with a router?
    A: Ensure network cable and router port work well. Verify printer and router IP are on the same network segment and that the printer IP is not occupied. Modify IP with IP setter software if needed.
  8. Messy code printing except Arabic numeral printing?
    A: Language switching may be incorrect. Turn on SW-4 switch on DIP switches.
  9. Fuzzy printing of Chinese characters?
    A: Turn on SW-3 switch (DIP switches on the bottom of the printer).
  10. Malfunction of the auto paper cutting?
    A: Check if SW-1 is off and ensure cutting function is enabled. Contact service center for repair.
  11. Red indicator keeps flashing during printing?
    A: This usually indicates high print head temperature. If printing stopped, contact service center for repair.
  12. How to install a network shared printer driver?
    A: Find the driver file of the shared printer from network neighborhood and click it.
  13. Communication interrupts and cannot print if multiple Ethernet printers work simultaneously?
    A: Check network and assign a specified Ethernet ID to each printer to avoid conflicts.
  14. Printing speed is very slow for serial printer?
    A: Change print mode to "Print as soft font" in Driver -> Properties -> Device Settings.
  15. Water or other liquid spills into the printer?
    A: Cut off power, dry main board or print head with a hairdryer (average 50 degrees Celsius is okay).
  16. Print page without any content (White)?
    A: If self-printing test is white, font may be damaged (replace font chips). If both printing methods yield no content, replace the printer head.
  17. How to reset to default setting?
    A: For IP reset, find the card slot on the bottom, press the black key (press and release). For WiFi reset, press and hold the black key for about 10 seconds.

7. User Tips

  • Driver Installation: While finding the correct driver can be challenging, many users report success after persistent searching. Ensure you use a compatible and clean driver to avoid issues.
  • Bluetooth Connectivity: The default Bluetooth PIN is often "1234". Some users report difficulties connecting via Bluetooth, especially with iOS devices. If direct Bluetooth connection fails, consider connecting the printer to a LAN and using the app on your mobile device via the same network.
  • Paper Size: The printer is designed for 80mm thermal paper rolls. While it cuts nicely, some users note limitations with other paper sizes or adjusting darkness/finer details.
  • Compatibility: The printer may not be compatible with all POS systems (e.g., Odoo ePOS). Verify compatibility with your specific system before purchase. For PDF printing, ensure your application supports printing to a thermal receipt printer.
  • Mac Compatibility: The manual primarily covers Windows, Android, and iOS. Mac compatibility may require specific drivers or workarounds not detailed here.

8. Warranty & Support

This product is covered by the "Shop's Three Guarantees" for after-sale service. For further details or technical assistance, please refer to the official user manual PDF or contact the seller directly.

A comprehensive user manual in PDF format is available for download: User manual (PDF).

9. Product Video Overview

Watch this video for a visual overview of the HZTZ 80mm Thermal Receipt Printer HZ-8360.

Video: HZTZ 80mm Thermal Receipt Printer HZ-8360 product overview.

© 2023 HZTZ. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.