1. Introduction
The XTOOL IP919 Pro Diagnostic Tool interfaces with the electronic control unit (ECU) of a vehicle to retrieve diagnostic trouble codes (DTCs), access data stream information, and command active tests (bi-directional control tests). Various vehicle control systems, such as engine, transmission, anti-lock brake system (ABS), SRS (Airbag) system, Chassis, Body, and more are readily diagnosed using this Diagnostic Tool. It is capable of graphing up to eight (8) live data parameters on a single screen and features diagnostic topology mapping.
Experience enhanced diagnostics with the XTOOL IP919PRO. Equipped with a 2.2GHz+1.8GHz Octa-core processor, 8GB RAM, 128GB storage, and a 10.1-inch touchscreen, it offers swift operation and seamless multitasking. Additional features include a collapsible kickstand, built-in speaker and microphone, rear camera, and a 6400mAh 7.2V battery for extended use.
It supports full system diagnostics, full OBD II functions, activation tests, coding, vehicle-specific functions, ADAS calibration, ECU configurations, VAG guided functions, PMI, Online Programming (for Benz, BMW, VW), BMW Test Plan, and 51 special functions outside the Diagnostics.
The Online Programming function enables the tool to establish a direct connection with manufacturer's servers over the internet for programming, updating, and configuring ECUs. This facilitates downloading the latest software updates, addressing known issues, improving performance, enhancing fuel efficiency, or introducing new features. It also allows for configuration changes related to safety features, driving modes, and connectivity options remotely, and ensures compliance with emissions standards and security updates.
The BMW Test Plan provides a structured approach to diagnostic procedures, covering various systems and components, offering step-by-step instructions, aiding in fault detection, providing detailed procedure guidance, and interpreting diagnostic trouble codes (DTCs) and data streams. This ensures accurate and efficient diagnosis, comprehensive coverage, and adherence to manufacturer-recommended standards.
The FCA Gateway is an important component for transmitting data between electronic modules in a vehicle, serving as a communication node. It facilitates data communication between control units (engine, body, entertainment), manages signal transmission, and aids in fault diagnosis by transmitting fault codes and related data to the diagnostic device, while also enhancing vehicle security.
2. Safety Information
For your safety, the safety of others, and to prevent damage to devices and vehicles, it is crucial to read and understand all safety instructions presented in this manual before operating or coming into contact with the device.
General Safety Instructions:
- Read and Understand: Ensure that all operators and individuals in the vicinity of the device have read and understood the safety instructions.
- Proper Use: Only use the device as described in this manual. Always adhere to the safety messages and test procedures provided by the vehicle or equipment manufacturer.
- Knowledge and Skill: The automotive technician must be knowledgeable about the system being tested. Familiarize yourself with proper service methods and test procedures.
- Acceptable Testing Practices: Perform tests in a manner that ensures your safety, the safety of others, and prevents damage to the device and the vehicle.
Specific Responsibilities:
- Refer to Manufacturer Guidelines: Always consult and follow the safety messages and applicable test procedures from the vehicle or equipment manufacturer before using the device.
- Use Appropriate Tools and Techniques: Due to the variety of test applications and product variations, it's important to use the correct tools and techniques for each specific task.
- Anticipate Safety Requirements: While this manual provides comprehensive guidance, it cannot cover every potential situation. Technicians must be prepared to handle unforeseen circumstances safely.
By adhering to these guidelines and responsibilities, you can ensure a safe and effective working environment while using the device.
Safety Messages:
Safety messages are included to prevent both personal injury and damage to equipment. Each safety message begins with a signal word that indicates the level of hazard involved.
⚠️ Danger
This signal word "indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders."
⚠️ Warning
This signal word "indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders."
Safety Instructions:
The safety messages provided here address situations that XTOOL is aware of. XTOOL cannot anticipate, evaluate, or provide advice on all potential hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety.
⚠️ Danger
When the engine is running, ensure the service area is well ventilated or connect a building exhaust removal system to the engine exhaust. Engines emit carbon monoxide, a colorless and poisonous gas that can impair reaction times and lead to serious injury or even death.
⚠️ Safety Warnings
- Safe Environment: Always perform automotive testing in a safe environment.
- Eye Protection: Wear safety eye protection that meets ANSI standards.
- Avoid Hazards: Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
- Ventilation: Operate the vehicle in a well-ventilated work area to avoid inhaling poisonous exhaust gases.
- Transmission and Brakes: Put the transmission in PARK (for automatic) or NEUTRAL (for manual) and ensure the parking brake is engaged.
- Wheel Blocks: Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Ignition System Caution: Be extra cautious around the ignition coil, distributor cap, ignition wires, and spark plugs, as these components generate hazardous voltages when the engine is running.
- Fire Extinguisher: Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
- Test Equipment Connections: Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- Clean Equipment: Keep the test equipment dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
- No Driving While Testing: Do not drive the vehicle and operate the test equipment simultaneously to avoid distractions that may cause an accident.
- Service Manual Reference: Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
- Battery Check: Ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure to avoid damaging the test equipment or generating false data.
- Avoid Electromagnetic Interference: Do not place the test device on the vehicle's distributor, as strong electromagnetic interference can damage the device.
3. Setup
3.1 What's In The Box
The XTOOL InPlus IP919 PRO package includes the following items:
| Name | QTY |
|---|---|
| Tablet | 1 |
| VCI Box | 1 |
| Type-C to Type-A Data Adapter | 1 |
| Type-C to Type-B Data Cable | 1 |
| Type-C to Type-C Charger Cable | 1 |
| Type-C to PD-12V Charging Cable | 1 |
| PD Supply Charger US | 1 |
| Cigar Lighter Cable | 1 |
| Charger Adapter EU | 1 |
| Charger Adapter UK | 1 |
| DB15 Main Cable | 1 |
| OBD II-16 | 1 |
| HONDA-3 | 1 |
| BMW-20 | 1 |
| BENZ-14 | 1 |
| BENZ-38 | 1 |
| TOYOTA-17 | 1 |
| MAZDA-17R | 1 |
| KIA-20 | 1 |
| HYUNDAI/KIA-10 | 1 |
| NISSAN-14 | 1 |
| GM/DAEWOO-12 | 1 |
| UNIVERSAL-3 | 1 |
| SUZUKI-3 | 1 |
| FIAT-3 | 1 |
| CITROEN-2 | 1 |
| AUDI-4 | 1 |
| MITSUBISHI-12+16 | 1 |
| Wireless Charger Dock | 1 |
| Color Carton | 1 |
| Quick Start Guide | 1 |
| Packing List | 1 |
| Tool Case | 1 |
3.2 Main Ports of the Tablet
The tablet features several ports for connectivity and power:
Description: This image shows the XTOOL IP919 PRO tablet from various angles, highlighting its Type-C port, reset hole, power button, microphone, charging contacts, camera, nameplate, and speaker. The top view shows the Type-C port and reset hole. The side view shows the power button. The bottom view shows the charging contacts. The rear view shows the camera, nameplate, and speaker.
- Type-C Port
- Reset Hole
- Power Button
- Microphone
- Charging Contact
- Camera
- Nameplate
- Speaker
3.3 Main Ports of the VCI Box
The VCI Box also has specific ports for connection:
Description: This image displays the VCI Box, showing its screen, DB15 port, nameplate, USB Type-B port, and DC port. The front view shows the screen. The side view shows the DB15 port and USB Type-B port. The rear view shows the nameplate and DC port.
- Screen
- DB15 Port
- Nameplate
- USB Type-B Port
- DC Port
3.4 Power Sources and Charging
The XTOOL IP919 Pro Diagnostic Tool can receive power from either of the two sources: Internal Battery Pack or AC Power Supply. It also supports charging via a dedicated Charging Dock.
Internal Battery Pack: The tool is powered by its internal rechargeable battery pack. When fully charged, it allows for approximately 3.5 hours of continuous operation. To recharge, connect the Diagnostic Tool to the AC Power Supply and plug it into a live AC power source. This ensures the tool remains powered and ready for extended diagnostic sessions without interruption.
AC Power Supply: You can power the Diagnostic Tool by connecting it to a standard AC outlet using the AC power supply. The connector at the end of the output cable from the AC power supply should be plugged into the DC power supply input jack located on the top of the Diagnostic Tool. Use only the provided AC power supply for proper and safe operation.
Charging Dock: The charging dock included in the packaging can also charge the tablet. When the charging dock is connected to a power source, it will power up. Simply place the tablet on the dock in the specified position to start charging. When the device's battery is low, the indicator light on the dock will turn red. When the device is fully charged, the indicator light will turn green. While charging, the indicator light will show blue.
Video Description: This video demonstrates the charging process of the XTOOL IP919 PRO using its docking station. It shows the tablet being placed on the dock, indicating blue light for waiting, red light for charging, and green light for fully charged state.
3.5 VCI Box Connection
The VCI Box communicates with the Diagnostic Tool via WiFi. The WiFi wireless connection provides faster transmission speed than Bluetooth, ensuring stable communication, longer transmission distances, and higher data capacity, helping you achieve faster diagnostics.
Steps to Connect the VCI Box:
- Press and hold the Power button to turn on the tablet.
- Select App language and start the activation.
- Follow the hints to complete the activation.
- Connect the DB15 connector of the main cable to the VCI box.
- Plug the OBDII-16 connector of the main cable into the vehicle's DLC port.
- When the VCI box gets powered on, the tablet will automatically search for it and make a WiFi connection.
- Your tablet is now ready.
Description: This image illustrates the VCI Box connecting to a vehicle's OBD-II port and communicating wirelessly with the XTOOL IP919 PRO tablet for diagnostics.
3.6 Product Activation
To activate your XTOOL IP919 PRO, follow these steps:
- Select a language for the operating system.
- Connect to an available Wi-Fi network. (You can also click the "TRAIL" button in the upper left corner to try it out before activation. However, activation is highly recommended to take advantage of any new online software updates.)
- Click "Register" to enter the activation page.
- Enter your email account and create a password (8-20 characters, letters and numbers).
- A pop-up window showing "Login successful" indicates that you have completed the first boot setup.
- Click "Start now" to enter the diagnostic system and start using the device.
- Once you see "Login successful" on the screen, the Diagnostic Tool has been successfully registered and activated. You can now use the email address and password you set for logging in. The Diagnostic Tool will remember your account information, so you won't need to log in every time.
NOTE: If you are unable to register the Diagnostic Tool or can't see the activation screen, contact support@xtoolonline.com.
4. Operating Instructions
4.1 Getting Started
Ensure that the Diagnostic Tool is adequately powered by either checking its battery status or connecting it to an external power supply.
NOTE: The images and illustrations depicted in this manual may differ from the actual ones.
4.2 Turn On/Off or Force Shutdown
- Turning On: Press and hold the power button located on the top right of the device for approximately five seconds. The tool will automatically power on if the internal battery pack has sufficient charge or if it is connected to an AC power supply. If completely drained, charge for more than 6 hours before turning on.
- Turning Off: Press and hold the power button for more than three seconds. The tool will then automatically power off.
IMPORTANT: Before turning off, terminate all vehicle communications. Forcing a shutdown during communication could cause issues with the ECM. Never disconnect the DBD-15 main cable while the Diagnostic Tool is actively communicating with the vehicle ECM.
- Emergency Shutdown: This procedure should only be used if the Diagnostic Tool does not respond to navigation or control buttons or exhibits erratic operation. Press and hold the Power button for five seconds until the Diagnostic Tool turns off.
IMPORTANT: Using the emergency shutdown procedure while communicating with the vehicle ECM may lead to ECM problems on some vehicles.
4.3 Diagnostic Screen Layout and Icons
When you turn on the Diagnostic Tool, it automatically starts the diagnostic program, and the diagnostic screen will appear. A hidden toolbar is located at the bottom of the diagnostic tablet. Swiping up from the bottom of the screen will reveal this toolbar for 3 seconds.
Description: This image shows the main diagnostic screen of the XTOOL IP919 PRO, featuring icons for Diagnostic, Special Function, Report, Updates, More, Auto Scan, Remote Control, Settings, and XTOOL.
- Auto Scan: Automatically detects and decodes the VIN, then scans comprehensively through all available vehicle electronic control modules for diagnostics.
- Diagnostic: Brings up the diagnostic menu, allowing navigation via Auto VIN, manual input of vehicle information, access to DEMO program, and OBD-II tests.
- Special Function: Covers most commonly performed maintenance services for car repair.
- Report: Includes functions for diagnostic reports, data playback, and data viewing.
- Updates: Allows downloading diagnostic software programs individually or in batch.
- More: Enables setting up user account and workshop profile, checking subscription period, and accessing firmware information.
- Settings: Customizes language, units of measurement, USB mode, OS settings, volume, brightness, and reviews device information (App version, OS version, Serial Number, VCI number).
- Remote Control: Launches TeamViewer for remote assistance. Ensure TeamViewer is in "ready to connect" status.
- XTOOL: Provides contact information for support and inquiries.
4.4 Hidden Toolbar Menu and Main Screen Icons
Swiping up from the bottom of the touchscreen will reveal the toolbar for 3 seconds. Clicking the home button on this toolbar will bring up the main screen of the diagnostic tablet. On the tablet page, you can freely switch between horizontal and vertical screens.
Description: This image shows the main screen layout of the XTOOL IP919 PRO, displaying various application icons such as Calendar, Contacts, Clock, Email, Music, Sound Recorder, Diagnosis, Calculator, Adobe Acrobat, QuickSupport, Endoscope, Chromium, Settings, Gallery, Camera, and Files.
- Screenshot: Take a screenshot of what's on the screen.
- Volume Down: Decrease the volume of the speaker.
- Back: Go back one step from the current menu.
- Home: Go to the main screen of the Android tablet.
- Volume Up: Raise the volume of the speaker.
- Diagnostic Program Shortcut: Run the diagnostic program.
- Screen Recording: Start recording the screen including surrounding sound. Press again to end.
- Background Cleanup: Clean up background running apps to make the tablet run faster.
- Calendar: Displays the calendar in day, week, and month views.
- Contacts: Manage contact information, add new contacts, or import from VCF files.
- Clock: Set alarms, timers, use the stopwatch, and access the clock.
- Email: Create new email accounts for sending emails or sharing reports.
- Music: Add new songs, playlists, albums, artists, and more.
- Sound Recorder: Record voice messages.
- Calculator: Opens the calculator.
- Files: Manage documents, reports, files, and folders stored in memory.
- Adobe Acrobat: Manage PDF files and access Dropbox accounts.
- Quick Support: Enables remote control by tech support for troubleshooting.
- Gallery: View screenshots and screen recordings.
- Camera: Activates the rear camera to take pictures of vehicle problems.
- Endoscope: Use with an endoscope for visual inspection in narrow areas.
- Chromium: Access XTOOL website for product support and information.
4.5 Connect to USB Type-C Port for Data Transfer
To enable data transfer between the Diagnostic Tool and a PC, follow these steps:
- Connect the Diagnostic Tool to a PC using a Type-C cable. Insert one end into the Type-C port on the Diagnostic Tool and the other end into a USB 2.0 port on the PC.
- Swipe down from either the upper right or upper left corner of the Diagnostic Tool to bring up the drop-down menu. Click on "Android System. USB file transfer turned on".
- Change the option from "No data transfer" to "File Transfer".
- On the PC, check the connected devices and click on "IP919 Pro" to access and manage the files stored in the internal memory of the Diagnostic Tool.
4.6 Red-Green Color Blindness Color Correction Mode
To set the Diagnostic Tool to red-green color blindness color correction mode, follow these steps:
- Swipe up from the bottom of the screen to bring up the hidden menu.
- Click the home button to switch to the main screen of the Android tablet.
- Navigate to Settings > Accessibility.
- Scroll down to find "Color correction" and toggle "Use color correction" to the on position.
4.7 Diagnose Vehicles
To ensure proper communication and diagnostics, the vehicle must be correctly identified. The vehicle identification sequence is menu-driven, and you should follow the screen prompts to enter the required information. Exact procedures may vary by the make, model, and year of the vehicle.
NOTE: For models that use the DOIP (Diagnostic Over Internet Protocol) communication protocol, ensure that the device is connected to the vehicle using a wired connection. This ensures reliable communication during diagnostics.
Steps to Identify a Vehicle:
- Follow Screen Prompts: Use the menu-driven prompts to enter the necessary vehicle information.
- Options for Vehicle Identification: VIN (Vehicle Identification Number), Manufacture area > Model > Year, or other specific criteria as required by the Diagnostic Tool.
4.7.1 Auto Scan
Click "Auto Scan" icon on the diagnostic screen, and the Diagnostic Tool will scan the vehicle VIN and decode the VIN for vehicle identification automatically.
IMPORTANT: If the Auto Scan option fails, try other vehicle identification options. "Manual Selection" is a reliable solution to input the vehicle's make, model, and year manually.
NOTE: Auto Scan functionality may not be compatible with all vehicles. If Auto Scan fails, try alternative options.
4.7.2 Manual Selection
When "Auto Scan", "Manual Input" and "Automatic Detection" fail to identify the vehicle, you can always select "Manual Selection" to identify the vehicle and proceed to diagnostics. Manual Selection is the most reliable vehicle identification option.
To identify a vehicle through "Manual Selection", click "Diagnostic" > Select region where the vehicle brand is originated (e.g., "Americas") > Select the vehicle brand (e.g., "CADILLAC") > Select "Manual Selection" > Select the model year > Model Name and you may go through a few other selections before you see "Automatic Scan" and "System Selection" on the screen.
4.7.3 OBD-II/EOBD Functions
This chapter describes the concept, protocols, test functions and the basic operation of the OBD-II/EOBD function. To find OBD-II/EOBD function, go to Diagnostic > Region Selection > OBD-II.
This option presents a quick way to check for DTCs, locate the cause of an illuminated malfunction indicator lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emissions-related.
The OBD-II function allows you to access "generic" OBD-II/EOBD data, which is limited to emission-related diagnostics.
- Read Trouble Code: Displays a list of current emission related DTCs, including Stored Codes (Generic and Manufacturer-Specific), Pending Codes, and Permanent Codes.
- Clear Trouble Code (Mode $04): Erases all emission-related diagnostic data stored in the memory of the selected ECM, including DTCs, freeze frame data, and test results.
- Live Data (Mode $01): View current emission-related data from the selected ECM. Displays parameter descriptions and corresponding values with units or states.
- Read Freeze Frame (Mode $02): Provides a snapshot of critical parameter values at the moment a DTC is set, typically corresponding to the last DTC.
- I/M Readiness (Smog Check): Checks the readiness of the monitoring system for emissions compliance.
- On-Board Monitor Test (Mode $06): View results of On-Board Monitor (OBM) tests, useful after servicing or clearing ECM memory.
- Component Test (Mode $08): Enables bidirectional control (to a limited extent) of the ECM to test operation of onboard systems or components.
- Read Vehicle Information (Mode $09): Requests and displays vehicle-specific information like VIN, calibration identification, and calibration verification number (CVN).
4.7.4 Special Functions
The Diagnostic Tool can perform advanced functions such as resets, relearns, matchings, adaptations, initializations, and more. The available menu options may vary depending on the vehicle being diagnosed. The special functions listed under the diagnostic menu offer a broader range of options compared to those available on the main diagnostic screen.
Description: This image lists over 51 reset functions available on the XTOOL IP919 PRO, including ABS Bleeding, EPB Reset, SAS Reset, Headlight, Stop/Start Reset, Airbag Reset, A/C Relearn, Oil Reset, BMS Reset, Injector Coding, TPMS Reset, Coolant Bleeding, Power Balance, Crank Sensor Relearn, Adblue Reset, Write VIN, Throttle Reset, D-P-F Regeneration, Gearbox Match, Tire Size Reset, Clutch Adaption, Control Unit Reset, ADAS, Suspension, SRS Reset, Seat Calibration, and more.
Some key special functions include:
- Oil Reset: Resets the engine oil life system after an oil change.
- EPB Reset: Resets the electronic parking brake system after brake pad replacement.
- BMS Reset: Resets the Battery Management System after battery replacement.
- Injector Adaptation: Writes the identification code of the fuel injector into the ECU.
- DPF Regen: Manages Diesel Particle Filter regeneration.
- TPMS Reset: Resets the Tire Pressure Monitoring System after tire replacement or troubleshooting.
- ABS Bleeding: Performs bleeding of the brake system to restore ABS brake sensitivity.
- IMMO Reset: Resets or reprograms the Immobilizer System for key matching.
- ECU Programming: Facilitates downloading the latest software updates from manufacturer's servers.
- Topology Map: Visually represents the communication network between ECUs, aiding in efficient diagnostics.
Description: This image shows the Topology Map Diagnostic feature, providing an intuitive and precise full systems scan for components like Engine, SRS, TPMS, Chassis, BMS, and EPB. It also highlights bi-directional control functions such as Wiper Test, Window Test, Headlight Test, Mirror Test, Fuel Pump, Sunroof, Headlamps, Radiator Fan Test, Compression Test, and Injector Buzz Test.
4.7.5 Data View (PID Data)
The Diagnostic Tool allows viewing real-time PID data of various sensors in a list, individual PID data in graphing, analog dashboard, setting maximum and minimum values, and custom PID data up to 8 sensors in a list, individual graphing, and merged graphing.
- PID Data List: Displays a list of PID names and real-time values.
- Individual PID Data Graphing: View graphing for individual PID data in List, Column, Graph, or 2D-graph modes.
- Set Maximum & Minimum Value Alarms: Set alarms for individual PID data. The diagnostic tool will display colors based on the values to indicate whether the PID data exceeds the maximum value or falls below the minimum value.
- Custom Up to 8 PID Data: Tick boxes for up to 8 PID data and click "Custom" to show a custom list of real-time PID data.
- 8-In-1 Graphing: Combine individual data bars into a single chart and display it as an image.
- Data Recording & Playback: Record PID data or graphing for later playback via the "Report" function.
- Export Data as CSV & Data View: Export recorded PID data as a CSV file to a PC or share via Bluetooth.
- Freeze Frame: When a fault code is triggered, the vehicle ECU saves related data at that moment to generate a freeze frame, used to analyze the root cause.
- Actuation Tests (Bi-Directional Controls): Checks the operation of certain actuators (solenoids, valves, relays).
4.8 Wi-Fi Connection
This Diagnostic Tool can connect to 2.4 GHz or 5.0 GHz frequency hotspot or Wi-Fi. Swipe up the hidden bottom toolbar and see the tab menu. Click Home > Network & Internet > Switch on Wi-Fi connection > Click Wi-Fi icon to view available Wi-Fi > Select the Wi-Fi you want to connect and input password to connect.
If your Wi-Fi connection is not functioning well, or if you are in an area without access to home Wi-Fi, you can connect to your mobile phone hotspot instead.
How to Turn on the Mobile Hotspot:
- For iOS users: Go to Settings > Turn on cellular network > Personal Hotspot > Switch on "Allow Others to Join" and "Maximize Compatibility" to set your phone and connect to the hotspot from your Diagnostic Tool.
- For Android users: Go to Settings > Wireless & networks > Tethering & portable hotspot > Portable WLAN hotspot > Switch on hotspot > Configure WLAN hotspot > Encryption Type > WPA2 PSK Show advanced options and make sure "Max connections allowed" has user left for the Diagnostic Tool.
NOTE: Wi-Fi connection is not necessary for diagnostics with most vehicle brands. However, for certain brands like Peugeot, which require access to an online server during diagnostics, it is essential to connect to Wi-Fi.
4.9 Red-Green Color Blindness Color Correction Mode
To set the Diagnostic Tool to red-green color blindness color correction mode, follow these steps:
- Swipe up from the bottom of the screen to bring up the hidden menu.
- Click the home button to switch to the main screen of the Android tablet.
- Navigate to Settings > Accessibility.
- Scroll down to find "Color correction" and toggle "Use color correction" to the on position.
4.10 Pre/Post Scan
- Pre-scan Function: Performed before any repair or troubleshooting to scan ECUs and identify existing Diagnostic Trouble Codes (DTCs). It provides a comprehensive understanding of the vehicle's current condition and potential problem areas, serving as foundational information for repairs.
- Pre-scan Importance: Helps identify potential issues in advance, prevents faults from being overlooked, and records fault codes for later comparison to check repair effectiveness.
- Post-scan Function: Performed after repair or troubleshooting to verify success, ensure fault codes are cleared, and check for new issues.
- Post-scan Importance: Ensures no faults remain, confirms correct repair work, and provides data support for repair records.
4.11 Diagnostic Topology Diagram
A powerful feature that visually represents the communication network between various electronic control units (ECUs) in a vehicle. This graphical tool helps technicians and engineers understand how different ECUs interact through various data buses. It is especially helpful in modern vehicles with complex systems, as it allows users to see the interconnected structure of ECUs and their communication channels in real-time.
Key benefits: Network Visualization, Efficient Diagnostics, Communication Analysis, Improved Problem-Solving.
5. Maintenance
5.1 Clean Equipment
Keep the test equipment dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
5.2 Software Updates
Software updates are crucial for maintaining compatibility and accessing the latest features. The subscription is an annual fee that covers compatibility with all makes and models. Upon expiration, you can renew immediately or skip years. Existing software programs remain on the Diagnostic Tool but cannot be updated to the latest versions without renewal.
Software updates can be performed while connected to a Wi-Fi network or using a mobile phone's hotspot. Using a mobile phone's hotspot is recommended in case of network provider restrictions or when home Wi-Fi is unavailable.
To update software programs, you have 2 options:
- Update All Software Programs: Click "Update All" at the bottom right of the update menu.
- Update Individual Software Program: Click the "↑" icon at the right side of the corresponding software program. If the update is interrupted, click the "↑" icon again to proceed.
NOTE: If "Network abnormal" prompt pops up, try another Wi-Fi or check router settings, or seek help from support@xtoolonline.com.
5.3 Deleting Software Programs
If the diagnostic tablet has taken up too much memory and become slow, you can delete rarely used software programs to free up space. To delete, click "Diagnostic" > Select Region > Press and hold the vehicle maker icon for 5 seconds > Click "Delete".
IMPORTANT: It's advisable not to delete software programs close to the subscription expiration date. Re-download any deleted software programs before expiration to ensure access.
6. Troubleshooting
6.1 Frequently Asked Questions (FAQs)
- Q1: I haven't found I/M readiness in the menu.
- A: Please enter Diagnostic > Select America/Europe/Asia > Click the "OBD-II" icon on the top left of the screen > Auto Scan/Select OBD-II Protocol > I/M Readiness.
- Q2: Unable to find live sensor data as the generic OBD2 scanner, like short-term/long-term fuel trim.
- A: Please enter Diagnosis > Select America/Europe/Asia > Click the "OBD-II" icon on the top left of the screen > Auto Scan/Select OBD-II Protocol > Live Data > LTFT, STFT or similar term.
- Q3: Unable to find the misfire data for my Ford/Dodge/Chrysler/Jeep cars?
- A: Please Select Diagnostic > America/Europe/Asia > OBD-II (On the top left of the screen) > Auto Scan or Select OBD-II Protocol for your car > On Board Monitor Test > Select "Misfire Cylinder Data" or similar term.
- Q4: How to export live data as CSV files?
- A: To generate CSV files: Live data > custom > Choose which live data you want to generate > Record > Save > Preview. To find the CSV files: Report > CSV View > Choose the live data you have saved just now.
- Q5: I cannot charge the battery now. I plugged in the cord, it's not charging. The battery is almost dead, only about 10% left.
- A: 1. Try to use the original charging cable or OBD test cable to charge the device for more than six hours. (Using the original charging cable to connect the power supply with a stable 12V voltage is preferred). 2. Hold down the shutdown button for 15 seconds and observe whether the device can be turned on normally. (Do not connect the charging cable). 3. Connect the device to the computer through the USB cable to see if the device can be recognized by the computer. 4. If neither of the above methods successfully charges the device, please contact our technical support: support@xtoolonline.com and send a video showing the charging issue.
- Q6: Can scanner tune up car?
- A: Sorry, IP919 Pro Diagnostic Tool does not have the capability to tune up car.
- Q7: Can this scanner still be used once the 3 year free updates are finished?
- A: Yes of course, you can still use its last updated software when it expires, even when it expires after three years.
- Q8: It was frozen until the battery went flat even I tried the reset button and the power button.
- A: Please make sure you have updated the App to the latest version (To update the App to the latest, go to Settings > About > App > click the arrow at the right side to check the latest App version and update to the latest.). If yes, please reset to factory settings and check again. If it still does not work, please reach us directly via support@xtoolonline.com.
- Q9: I cannot update, I've tried Wi-Fi and cell phone as hotpot, however, keep telling me failure connection.
- A: This problem could reside with the setting of your router firewall or the network provider in your region that restricts access to the server, please check if your router firewall can access the server or not. If the problem still exists, please reach us via support@xtoolonline.com.
- Q10: Any chance to install Google play store?
- A: We are sorry that this diagnostic tool does not support installing Google Play store. However, if you want to install a third-party app, you can download apk file and install it on the diagnostic tool. We don't recommend installing other third-party apps as it may slow down its running speed.
- Q11: Why should I connect the scanner to internet once a month?
- A: It's a government policy compliant requirement to connect the device to Wi-Fi once a month to report IP location to prevent the device being used for illegal activities. If connecting it to Wi-Fi did not solve the issue, please reach us directly via support@xtoolonline.com ASAP.
- Q12: The auto scan/VIN cannot work on my vehicle.
- A: As for auto scan/VIN, it does not cover all vehicles as some vehicles did not store VIN in the ECU, some VIN is not included in our coverage database, and some vehicles like Dodge work in "sending command, answering command" mode for vehicle communication. You can try alternative navigation methods: Turn on the ignition and not start the engine to try auto scan (for older vehicles, start the engine); Manual input VIN; Diagnosis > America/Europe/Asia > Vehicle Selection > Automatic Detection; Diagnosis > America/Europe/Asia > Vehicle Selection > Manually Selection.
- Q13: My diagnostic tool cannot connect to Wi-Fi.
- A: If it shows "times out", check your router (WPA2, not WPA3) and ensure it hasn't blocked outgoing network traffic to non-US regions. A mobile phone hotspot often solves registration issues. If connected but shows "connect internet to sync your device", correct the time zone to Pacific time zone in settings.
- Q14: How can I change the menu language into Spanish?
- A: Send the S/N of the diagnostic tool to support@xtoolonline.com for Spanish software program authorization. Once authorized, go to "Settings" on the diagnostic menu > language > Spanish, then go to "Updates" to download all software programs.
- Q15: Why the scanner shows the report shared successfully but the email box didn't receive the report?
- A: All reports are sent from service@xtoolonline.com, which may be blocked by your email provider. If using Gmail, whitelist service@xtoolonline.com. Check your junk email folder.
- Q16: When I enter the diagnosis software program, it shows "license exception" or "Failed" error message.
- A: Try deleting and re-downloading software programs under "Updates". If the issue persists, contact support@xtoolonline.com with the S/N of the diagnostic tool.
- Q17: Browser can access internet normally, but cannot download updates under "Updates", prompted to check the network connection.
- A: Switch to a mobile hotspot or other Wi-Fi and try again.
- Q18: When activating the device, it shows error message "registration failure" after entering your email address.
- A: Try mobile hotspot (recommended) or a different network to activate.
- Q19: Received a used device with a lock screen password, unable to open the device.
- A: Contact our support team with the device's S/N via support@xtoolonline.com to resolve the issue.
- Q20: How to use the function of "Remote Control"?
- A: The "Remote Control" menu is used for tech support. Schedule an appointment with XTOOL support. You cannot start a remote control without an appointment.
- Q21: What is the update fee of IP919 Pro? After my IP919 Pro passes the free subscription date, can I use it as usual as before?
- A: The renewal fee of IP919 Pro after three years is $99 per year. You can still use previously downloaded software, but new updates require renewal. Contact XTOOL to extend the period.
- Q22: How can I subscribe to the update on my IP919 Pro?
- A: The update fee is $99 per year. Transfer payment to info@acartool.com via PayPal, then provide a screenshot of the transaction to support@xtoolonline.com.
- Q23: I don't want to register an account. Why did I fail to perform the functions in trial mode?
- A: Trial mode has limited functionality and is for practice. Registering an account is recommended for full functionality. If issues persist after registration, contact support@xtoolonline.com.
- Q24: When using the trial mode, do I need to connect my device to the Internet/Wi-Fi?
- A: No, you don't need to connect your device to the Internet/Wi-Fi when you are in trial mode.
- Q25: Shall I connect my device to the Internet/Wi-Fi all the time?
- A: No, it doesn't need an Internet connection all the time. You just need to register it and download the updates with internet connection. For some special vehicles like Peugeot, scan tools need to be connected to the Internet, because it is required by the manufacturer. It will require internet connection when you are doing some advanced features like ECU Programming.
- Q26: Do your tools support all functions on all vehicles?
- A: All XTOOL tools are comprehensive diagnostic tools that can work on many vehicle brands, but they cannot perform all functions on all vehicles, just like any other scan tools in the market. Even factory scanners can only perform functions on their own brand. Vehicle configurations vary, even for the same model.
- Q27: Why when I manually enter the VIN on my device, the letters Q, I, O on the keyboard are gray?
- A: The letters Q, I, and O are easily confused with other characters (like 1 and 0). VIN standards stipulate that these three characters cannot be used. This is normal.
- Q28: How can I transfer the device's data to my phone or PC?
- A: For iOS phones, file transfers are not supported. For Android phones, agree to receive the transfer after clicking Bluetooth transfer on the tablet. If issues persist, connect to a PC using a Type-C cable. Swipe down from the top right/left corner, click "Android System. Charging this device via USB", change to "File Transfer", then access "IP919 Pro" on your PC.
6.2 User Tips
- For locksmith and diagnostic work, users have found this equipment excellent and easy to use.
- When experiencing charging issues, always try using the original charging cable and ensure a stable 12V power supply.
- If the device freezes, ensure the app is updated to the latest version and consider a factory reset if the problem persists.
- For Wi-Fi connection problems, check router settings (WPA2 compatibility) or use a mobile hotspot.
- Remember to connect the scanner to the internet at least once a month for policy compliance.
7. Specifications
| Item | Description/Specification |
|---|---|
| Display | 10.1 Inch Touch Screen, 1920 x 1200 Resolution |
| Operating System | Android 10.0 |
| Processor | 2.2GHz+1.8GHz Octa-core Processor |
| Memory | 8G RAM, 128G ROM |
| Connectivity | Bluetooth 5.0, Wi-Fi(2.4GHz & 5Ghz), Type-C |
| Operating Method | Flat Panel Touchscreen |
| Upgrade Method | Device Connects to WIFI for Online Upgrade |
| Battery | 7.2V Rechargeable Li-ion Battery, 6400mAh |
| Tested Battery Life | 3.5 Hours |
| Power Supply Input | 100-240V~50-60Hz 0.5V Max |
| Power Supply Output | 5.0V-3.0A 15.0W/9.0V-2.22A, 19.98W/12.0V-1.67A 20.04W |
| Dimensions | 31.5*3.2*19(CM) |
| Free Renewal Update | 3 Years |
| Charging Method | Type-C Charging (Fast Charging), Charge Dock |
| Supported Protocols | CAN FD/DOIP/FCA |
| USB Port | USB2.0 |
| WIFI | 2.4G/5Ghz |
| Sensor | Gravity Accelerometer/Ambient Light Sensor |
| Audio | Microphone |
| Speaker | Built-In Speaker |
| Camera | 8 Mega Pixel |
| Weight (Including Battery) | 1.41 KG |
| Gross Weight | 8.3 KG |
| Operating Temp Range (Ambient) | 32°F ~ 104°F (0°C ~ 40°C) |
| Storage Temp (Ambient) | 14~122°F (-10~50°C) |
| Operating Humidity | <90% |
8. Warranty & Support
8.1 Limited Two-Year Warranty
Shenzhen XTOOLtech Intelligent Co., LTD. (the Company) warrants to the original retail purchaser of this XTOOL device that should this product or any part thereof during normal usage and under normal conditions be proven defective in material or workmanship that results in product failure within two years from the date of purchase, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company's option, without charge for parts or labor directly related to the defect(s).
The Company shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the device.
This warranty does not apply to:
- Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation/repair or, improper storage;
- Products whose mechanical serial number or electronic serial number has been removed, altered, or defaced;
- Damage from exposure to excessive temperature or extreme environmental conditions;
- Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company;
- Defects in appearance, cosmetic, decorative, or structural items such as framing and non-operating parts;
- Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft, or improper usage of any electrical source.
8.2 Technical Assistance
For technical assistance, you can reach XTOOL via:
- Website: https://www.xtoolonline.com
- Email: support@xtoolonline.com
- Address: Room 601, Block A, Zaoan Business Building, Shigu Road, Xili Residential District, Nanshan District, Shenzhen
8.3 Product Training Videos
Diagnostic Tool specific training videos are available on the XTOOL website. Follow along and learn the basics of Diagnostic Tool operation with free training videos. Videos are product specific and are available at: https://www.xtoolonline.com/support/product-videos. Click on the "Support" > "Product Videos" > "Diagnostic Tools" tab, select the applicable Diagnostic Tool, then select the training video you want to watch.
8.4 Manuals / Technical Documentation
This manual is periodically revised to ensure the latest information is included. A digital PDF version of the User Manual is available for download: User Manual (PDF). This PDF includes a search function for easy navigation.
8.5 Remote Control
This function allows you to request remote assistance from XTOOL technical team. Ensure the Diagnostic Tool is connected to Wi-Fi. Launch TeamViewer via the "Remote Control" icon, wait for "Ready to connect" status, and note down the TeamViewer ID. Schedule a remote assistance session in advance.
8.6 Data Logging
For software-related issues or vehicle communication problems, data logging provides crucial information for technical support. Ensure your Diagnostic Tool remains connected to Wi-Fi for at least 15 minutes and provide the Serial Number (S/N) to XTOOL technical team to access and analyze data logs.
8.7 FAQ Database
Access the FAQ database on the XTOOL website: https://www.xtoolonline.com/faqs.
8.8 Training Center
Visit the Training Center on the XTOOL website for more resources: https://www.xtoolonline.com/support/product-videos.
8.9 Contact Us
For general inquiries, support, or to connect with the XTOOL community:
- Email: support@xtoolonline.com
- Website: https://www.xtoolonline.com/
- Social Media: Search for "xtoolonline" on TikTok, Instagram, and Facebook.
- Facebook User Group: Search for "XTOOL Official Online Diagnostic Tools".
- YouTube: Search for "xtoolonline".
- For wholesale business or distributors: business@xtoolonline.com / sales@xtoolonline.com
- For product invention/testing: inventers@xtool.com
- For social media content creation: marketing@xtoolonline.com
9. Compliance Information
9.1 FCC Compliance / FCC ID: 2AW3IP102
This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
⚠️ WARNING:
Making changes or modifications without explicit approval from the responsible compliance authority may revoke the user's authorization to operate the equipment.
NOTE: This equipment has undergone testing and meets the requirements for a Class B digital device, as stipulated by Part 15 of the FCC Rules. These standards are intended to offer reasonable protection against interference when installed in residential environments.
This equipment emits radio frequency energy during operation, which can potentially interfere with radio communications if not installed and used as per the provided instructions. To mitigate such interference, consider the following measures: Reorient or relocate the receiving antenna, increase the separation between the equipment and the receiver, connect the equipment to an outlet on a circuit different from that to which the receiver is connected, consult the dealer or an experienced radio/TV technician for assistance.
9.2 SAR (Specific Absorption Rate)
The device's emitted radio frequency power adheres to FCC regulations on exposure limits. To ensure safe usage, it's recommended to minimize human contact with the device during its regular operation. FCC guidelines for wireless devices assess exposure through the Specific Absorption Rate (SAR), which is capped at 1.6 W/kg. SAR evaluations follow standard operational positions recognized by the FCC, where the device transmits at its highest certified power level across all tested frequency ranges. Although SAR is measured at peak power, actual exposure during normal use tends to be lower. To maintain compliance with FCC standards, reduce human proximity to the device's antenna whenever feasible.
9.3 RF Warning Statement
The device meets general RF exposure requirements and can be safely used under typical portable exposure conditions without restrictions. The prefix "IC" before the radio certification number indicates that the device has complied with the technical specifications established by IC (Innovation, Science and Economic Development Canada).
9.4 RoHS Compliance
This device complies with the European RoHS Directive 2011/65/EU, which restricts the use of certain hazardous substances in electrical and electronic equipment.
9.5 CE Compliance
This product conforms to the essential requirements of the following Directives and bears the CE mark accordingly: EMC Directive 2014/30/EU, R&TTE Directive 1999/5/EC, Low Voltage Directive 2014/35/EU.