1. Product Overview
This manual provides instructions for the DIANQI 16mm and 19mm Metal Push Button Switches. These durable switches are designed for various applications, including automotive use (e.g., car trunk release), PC modifications, and other device controls. They feature an integrated LED indicator and are available in both momentary (reset) and latching (locking) configurations.

Image 1: DIANQI Metal Push Button Switches with Car Trunk Icon
2. Safety Information
- This product operates with voltages that can be above 50Vac or 75Vdc. Always disconnect power before installation or maintenance to prevent electrical shock.
- If you are unsure about electrical wiring, it is recommended to seek assistance from a qualified professional.
- Ensure all connections are secure to prevent short circuits or malfunctions.
- Do not exceed the specified electrical ratings (3A/250VAC) for the switch.
3. Package Contents
Each package typically includes:
- 1 x Metal Push Button Switch (16mm or 19mm, as selected)
- 1 x Pre-wired Socket Connector (with 5 wires)
- 1 x Mounting Nut

Image 2: Package Contents - Switch Components
4. Specifications
| Feature | Description |
|---|---|
| Material | Brass nickel plated (silver body) / Alumina (black body) |
| Installation Diameter | 16mm or 19mm |
| Switch Type | Push Button (Momentary Reset / Latching Locking) |
| Contact Configuration | 1NO1NC (Normally Open, Normally Closed) |
| Rating Switches | 3A / 250VAC |
| Waterproof Rating | IP65 |
| LED Colors Available | Red, Green, Blue, White, Yellow (Amber) |
| LED Current | 15mA |
| LED Voltage Options | 3-6V, 12-24V, 110-220V (Please select correct voltage) |
| Application | Car, PC, Machine, Device buttons |
| Is Smart Device | Yes (Note: This may refer to general compatibility with smart systems rather than built-in smart features.) |
| Origin | Mainland China |

Image 3: Available Switch Body Materials and Sizes
5. Setup and Installation
- Prepare Mounting Hole: Drill a circular hole in your mounting surface according to the switch's installation diameter (16mm or 19mm). Refer to the dimension diagram below for precise measurements.
- Insert Switch: Carefully insert the switch body through the prepared hole from the front.
- Secure Switch: Thread the mounting nut onto the switch body from the rear and tighten it securely to hold the switch in place. Do not overtighten.
- Connect Wiring: Attach the pre-wired socket connector to the pins on the back of the switch. Ensure it clicks into place firmly. Proceed to the "Wiring Diagram" section for detailed connection instructions.

Image 4: Switch and Socket Dimensions
- 16mm Switch Dimensions: Mounting hole diameter approx. 15.8mm, overall length approx. 35mm.
- 19mm Switch Dimensions: Mounting hole diameter approx. 18.8mm, overall length approx. 40.5mm.
- Socket Wire Length: Approx. 190mm to 195mm.
6. Wiring Diagram
The switch comes with a 5-wire socket connector. Understanding each terminal is crucial for correct operation.

Image 5: Wiring Diagram for 5-Wire Socket
Terminal Connections:
- + (Positive Pole for Light): Connect to the positive (+) power supply for the LED illumination.
- - (Negative Pole for Light): Connect to the negative (-) power supply (ground) for the LED illumination.
- NC (Normal Close): This terminal is connected to 'C' when the button is NOT pressed (for momentary) or when the switch is in the OFF state (for latching).
- NO (Normal Open): This terminal is connected to 'C' when the button IS pressed (for momentary) or when the switch is in the ON state (for latching).
- C (Common): This is the common terminal for the switch contacts. Connect your input or output line here, depending on your application.
Note: Ensure the LED voltage matches your power supply (e.g., 12-24V for car applications). Incorrect voltage can damage the LED.
7. Operation
Momentary (Reset) Switch:
When you press this type of switch, it activates (e.g., connects NO to C). The switch returns to its original state (e.g., disconnects NO from C) as soon as you release the button. This is ideal for functions like horn buttons or momentary trunk releases.
Latching (Locking) Switch:
When you press this type of switch, it activates and stays in the ON position (e.g., NO remains connected to C) even after you release the button. To turn it OFF, you press the button again, and it returns to its original state. This is suitable for functions like power switches or lights that need to stay on.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the switch surface. Avoid abrasive cleaners or solvents that could damage the finish or LED.
- Connection Check: Periodically inspect wiring connections to ensure they remain secure, especially in environments with vibration (e.g., automotive).
- Water Resistance: The switch is rated IP65, meaning it is protected against dust ingress and low-pressure water jets. It is not designed for submersion. Ensure the mounting area is sealed if exposed to direct water spray.
9. Troubleshooting
LED Not Lighting Up:
- Check Voltage: Ensure the power supply voltage matches the LED voltage rating of your switch (e.g., 12-24V).
- Check Polarity: Verify that the positive (+) and negative (-) wires for the LED are connected correctly.
- Check Connections: Ensure the LED wires are securely connected to the power source.
Switch Not Activating Device:
- Verify Wiring: Double-check the connections to the NC, NO, and C terminals according to your application's requirements.
- Check Device: Ensure the device you are trying to control is functioning correctly and its wiring is intact.
- Continuity Test: If possible, use a multimeter to test the continuity between C and NO/NC terminals when the switch is actuated.
Loose Switch:
- Tighten Nut: Gently re-tighten the mounting nut from the rear of the panel.
10. User Tips
- The switch provides a clear and satisfying actuation point, making it pleasant to use.
- These switches can significantly enhance the aesthetic appeal of your car interior or custom projects.
- The pre-wired socket simplifies installation, ensuring a good and reliable connection.
- Always refer to the wiring diagram carefully to ensure correct functionality and avoid damage.
11. Certifications
This product complies with the following standards:
- RoHS: Restriction of Hazardous Substances
- CE: Conformité Européenne
- CCC: China Compulsory Certificate
12. Warranty and Support
For any questions, technical support, or warranty inquiries, please contact your seller directly. Keep your purchase records for reference.