1. Safety Warnings
Before using this product, please read and understand the following safety warnings:
- Before using this product, please make sure that your voltage is appropriate for this product's working voltage. Using this product with a voltage other than the one specified may damage the product and cause safety hazards.
- Do not disassemble this product, as the light diodes can cause damage to the eyes.
- The light bulb will heat up when working. Do not use it in a confined holder for an extended period of time. Ensure sufficient ventilation for the light bulb to allow for heat dissipation.
- For indoor use only.
- Disconnect power before installation to prevent risk of electronic shock.
- Use in Dry Locations only.
- For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.
- Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
2. Product Overview
The Yeelight Smart LED Bulb W4 Lite E27 is a versatile smart lighting solution designed to enhance your home ambiance with its advanced features and broad compatibility.
Key product highlights and features.
- 16 Million Colors: Create the perfect ambiance for any occasion.
- Dimmable & Tunable: Adjust brightness and color temperature (2700-6500K) to suit your mood.
- Smart Control: Compatible with major smart home platforms including Google Home, Apple HomeKit, Amazon Alexa, Samsung SmartThings, and Yandex Alice.
- Voice Control: Easily manage your bulb using voice commands.
- Music Sync & Game Sync: Synchronize lighting effects with your audio and gaming experiences.
- Lightweight Design: Easy to install and handle.
- Firmware Upgrade: Supports over-the-air firmware updates for continuous improvement.
- Smart Scenarios: Create custom lighting scenes for different activities.
Create any mood with 16-million-color smart LED bulb.
3. Setup
3.1. Install the Bulb
Follow these steps to physically install the Yeelight Smart LED Bulb:
- Ensure that the power is off at the light fixture before installing or removing the bulb.
- Carefully screw the bulb into a standard E27 lamp holder.
- Turn on the power to the light fixture.
Installation diagram for the smart LED bulb.
Important Notes:
- Do not use this product in a lamp with a dimmer (e.g., a desk lamp with a round dimmer switch) to avoid damaging the product.
- Do not use the light bulb in a narrow and ill-ventilated lamp shade as it may cause weak signals or heat dissipation issues.
3.2. Connect with Mi Home / Xiaomi Home App
This product works with the Mi Home / Xiaomi Home app for control and interaction with other smart home devices.
- Scan the QR code below to download and install the app. If the app is already installed, you will be directed to the connection setup page. Alternatively, search for "Mi Home / Xiaomi Home" in your device's app store.
- Open the Mi Home / Xiaomi Home app, tap the "+" icon on the upper right corner.
- Follow the on-screen prompts to add your device.
Scan this QR code to download the Mi Home / Xiaomi Home app or proceed with device setup if already installed.
(Note: The QR code for the app is typically found in the physical user manual or on the product packaging.)
3.3. Apple HomeKit Smart Control
To control your Yeelight Smart LED Bulb with Apple HomeKit:
- Open the Home app on your iPhone or iPad.
- Tap "Add Accessory" and follow the instructions to scan the QR code. This QR code is located on the back cover of the user manual or directly on the lamp. Alternatively, enter the 8-digit setup code found above the QR code to grant Apple Home app access.
Important:
- Ensure a Wi-Fi network with Internet access is available. This product does not support 5 GHz networks; use a 2.4 GHz network.
- To control this HomeKit-compatible accessory, it is recommended to use iOS 9.0 or above.
- The HomeKit setup code is crucial; do not lose it. You will need it again if you restore factory settings and re-add the product to the Home app.
- If the user manual is lost, you can scan the QR code or enter the setup code found on the lamp itself.
Control your smart LED bulb with just words using compatible smart home platforms.
4. Operating Instructions
Once your Yeelight Smart LED Bulb is installed and connected to your preferred smart home app, you can begin to enjoy its features:
- Adjust Color Temperature: Use the app to change the color temperature from warm white (2700K) to cool white (6500K).
- Adjust Brightness: Dim or brighten the bulb to your desired level through the app or voice commands.
- Select Colors: Choose from 16 million colors to create custom lighting for any mood or occasion.
- Voice Control: Use voice assistants like Google Assistant, Alexa, or Siri (via HomeKit) to turn the bulb on/off, change colors, or adjust brightness.
- Smart Interaction & Scenarios: Set up automated routines and scenes within your smart home app. For example, schedule the lights to turn on at sunset or change color for movie night.
- Music & Game Sync: Explore features within the Yeelight app or compatible third-party apps to synchronize your bulb's lighting effects with music or in-game actions.
5. User Tips
- Easy Setup: Many users find the installation and initial connection to the phone app straightforward.
- Brightness: The bulb provides good brightness for general use.
- Heat Dissipation: Be aware that the bulbs can get noticeably hot during operation. Ensure they are not used in confined fixtures to prevent overheating and potential signal issues.
- Control Limitations: This model is primarily controlled via the smartphone app or LAN control. It is not compatible with Yeelight wall switches, flex switch support, or Bluetooth remotes/wall switches.
- App Compatibility: The bulb works effectively with the Mi Home/Xiaomi Home app, including in regions using the Chinese system. It also supports Samsung SmartThings.
6. Maintenance
To ensure optimal performance and longevity of your Yeelight Smart LED Bulb:
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
- Firmware Updates: Regularly check the Mi Home / Xiaomi Home app for available firmware updates to ensure your bulb has the latest features and security enhancements.
7. Troubleshooting
- Bulb Not Responding:
- Check if the bulb is properly screwed into the lamp holder and the power is on.
- Ensure your Wi-Fi network (2.4 GHz) is active and has internet access.
- Restart the bulb by turning the power off and on at the switch.
- Check the app for connection status and try re-pairing if necessary.
- Overheating:
- If the bulb feels excessively hot, ensure it is not in a confined fixture or a poorly ventilated lampshade. Adequate airflow is necessary for heat dissipation.
- Incompatible Switches:
- The bulb is not designed to work with traditional dimmers or certain smart wall switches (e.g., Yeelight wall switches, Bluetooth remotes). Control should be done via the app or voice assistants.
- Weak Signal:
- Ensure the bulb is within range of your Wi-Fi router and not obstructed by thick walls or other interference sources.
- Avoid using the bulb in narrow or ill-ventilated lamp shades, which can also affect signal strength.
8. Specifications
| Attribute | Value |
|---|---|
| Model | YLQPD-0012 |
| Lamp Holder | E27 |
| Rated Power | 9 W |
| Luminous Flux | 806 lumens |
| Rated Input | 220-240 V ~ 50/60 Hz 0.085 A |
| Color Temperature Range | 2700-6500 K |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz |
| Service Life | Approx. 15,000 h |
| Operating Temperature | -10°C to 40°C |
| Operating Humidity | 0-85% RH |
| Operating Frequency | 2412 - 2480 MHz |
| Maximum Output Power | 20 dBm |
| Dimensions | Ø60 × 110 mm |
Yeelight Smart LED Bulb W4 Lite (White) and its packaging, showing key specifications.
9. Regulatory Information
9.1. EU Declaration of Conformity (CE)
Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLQPD-0012 is in compliance with Directive 2014/53/EU.
9.2. UK Declaration of Conformity (UKCA)
Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLQPD-0012 is in compliance with Radio Equipment Regulations 2017.
9.3. WEEE Disposal and Recycling
All products bearing the WEEE symbol (crossed-out wheeled bin) are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
10. Support
For further assistance or detailed information, please refer to the official user manual PDF provided by Yeelight. You can typically find this document on the product support page of the Yeelight website or through the link provided by your retailer.
A digital version of this manual is available at: Yeelight Smart LED Bulb W4 Lite User Manual (PDF)