1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your AVATTO Tuya Smart Dimmer Switch Module (ZDMS16). This smart module allows you to control your lighting remotely via the Tuya Smart App, voice commands through Alexa or Google Home, and traditional wall switches. It supports both ZigBee and WiFi protocols, offering flexible integration into your smart home system.

Figure 1.1: System overview showing the dimmer module connected to a WiFi Router for APP control and Voice Control (Google Home). A Tuya ZigBee Hub is required for ZigBee versions.
2. Safety Warnings
Please read these warnings carefully before installation and use to ensure safe operation.
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp, or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, leading to abnormal operation of the device.
- Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair, or modify the device.
3. Technical Specifications
| Feature | Specification |
|---|---|
| Product Type | Zigbee Dimmer Module |
| Voltage | AC100-240V 50/60Hz |
| Operation Frequency | 2.405GHz-2.480GHz (IEEE 802.11b/g/n) |
| Operation Temperature | -10°C to +40°C |
| Protocol | Zigbee 3.0 |
| Operation Range | <100m |
| Dimensions (WxDxH) | 39x39x19.4 mm |
| IP Rating | IP20 |
| Max. Load (1 CH) | LED (AC230V 150W) / (AC120V 80W) |
| Max. Load (2 CH) | LED (AC230V 2x100W) / (AC120V 2x60W) |
| Certificates | CE ROHS |

Figure 3.1: Detailed product dimensions and specifications.
4. Installation
4.1. Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram provided below.
- Insert the module into the junction box.
- Turn on the power supply and follow switch module configuration instructions.
Note: Take your smartphone close to the switch module when you're configuring, and make sure you have min. 50% Wi-Fi signal.
Wiring Diagrams:
1 CH Zigbee Dimmer Module

Figure 4.1: Wiring for 1-channel dimmer with a single switch. Connect L (Live), N (Neutral), L1 (Load), and S1 (Switch).
2 CH Zigbee Dimmer Module (Double Switch)

Figure 4.2: Wiring for 2-channel dimmer with two switches (2-way control). Connect L (Live), N (Neutral), L1 (Load 1), L2 (Load 2), S1 (Switch 1), and S2 (Switch 2).
Video 4.1: Installation and wiring demonstration for the dimmer module (relevant segment from 0:43 to 0:49).
5. Device Setup and Network Connection
5.1. App Download and Registration
- Scan the QR code provided in the manual or search for "Tuya Smart" or "Smart Life" in your app store (iOS/Android) to download the app.
- Log in or register your account using your mobile number or email address. Follow the in-app instructions to set up your family/home.
5.2. Network Connection (Pairing Mode)
After wiring the switch module, ensure it is powered on.
- Enter Pairing Mode: Press and hold the button on the dimmer module for 5 seconds. The indicator light will start flashing rapidly, indicating it's in connection status. Alternatively, if using a traditional dimmer switch connected to the module, turn it off, then press and hold it for 10 seconds until the connected light flashes quickly.
- Open Tuya Smart App: Open the Tuya Smart App on your smartphone.
- Add Device:
- For WiFi Dimmer Module: The app should automatically detect the "Dimmer Module" to be added. Tap "Add" and enter your Wi-Fi information (ensure it's a 2.4GHz network). Follow the on-screen prompts to complete the addition.
- For Zigbee Dimmer Module: Ensure your Zigbee Gateway is already added and installed in the Tuya Smart App and connected to your Wi-Fi network. In the app, navigate to your Zigbee Gateway, then select "Add sub-device" or "Zigbee devices list" and "Add devices". The app will search for nearby devices. Once "Dimmer Switch" is found, tap to add it.
- The connection process may take 10-120 seconds. Once successfully added, you can control the device via your mobile phone.
Video 5.1: WiFi Dimmer Module network connection guide (relevant segment from 0:50 to 1:08).
Video 5.2: Zigbee Dimmer Module network connection guide (relevant segment from 1:09 to 1:32).
6. Operating the Dimmer Module
6.1. App Control (Stepless Dimming)
Once the dimmer module is successfully paired with the Tuya Smart App, you can control your lights from your smartphone:
- Open the Tuya Smart App and select your dimmer module.
- Use the brightness slider to adjust the lamp brightness from 0% to 100% for different scenes (sleeping, working, watching movies, parties, etc.).
- You can also turn the lights ON/OFF directly from the app.

Figure 6.1: Stepless dimming control via the smartphone app.
6.2. Manual Override (Push-Switch Control)
The dimmer module supports manual control via a connected push-switch:
- Short Push (<1s): Toggles the light ON/OFF.
- Long Push (>1s): Adjusts the brightness level.
Notes:
- Both app adjustments and push-switch adjustments can overwrite each other; the last adjustment remains in memory.
- App control is synchronized with the manual switch.
- The "S" terminals may be left unconnected if no manual control is required.
Video 6.1: App control demonstration for dimming lights (relevant segment from 0:05 to 0:36).
7. Maintenance
The AVATTO Smart Dimmer Switch Module is designed for low maintenance. To ensure optimal performance and longevity:
- Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures or humidity.
- Do not use harsh chemicals or abrasive cleaners on the device.
8. Troubleshooting (FAQ)
Q1: What should I do if I can't configure the dimmer module?
- a. Please check whether the device is powered on.
- b. Make sure the Zigbee gateway (if applicable) is available.
- c. Check if your internet conditions are good.
- d. Make sure the password entered in the App is correct.
- e. Make sure the wiring is correct.
Q2: What device can be connected to this Zigbee dimmer module?
Triac LED light, incandescent lamp, or halogen lamp.
Q3: What happens if the Wi-Fi goes off?
You can still control the light connected to the dimmer module with your traditional switch. Once Wi-Fi is active again, the device connected to the module will connect automatically to your Wi-Fi network.
Q4: What should I do if I change the Wi-Fi network or change the password?
You have to re-connect your Zigbee dimmer module to the new Wi-Fi network accordingly as per the App User Manual.
Q5: How do I reset the device?
Turn off the traditional button switch (the one connected to the Zigbee dimmer module). Then press and hold for 10 seconds or more until the lamp connected to the module flashes quickly for pairing.
Q6: My lights are flickering. What could be the issue?
Flickering lights can sometimes be caused by incompatible LED bulbs or a load that is too low for the dimmer. Ensure your LED bulbs are dimmable and meet the minimum load requirements of the dimmer module.
9. User Tips
- Dimming Range: Note that the dimmer may operate effectively between 25% and 75% brightness for some LED bulbs. Below 25%, the light might turn off. This can vary based on the specific LED bulbs used.
- Wiring Multiple Modules: Avoid connecting two dimmer modules in a row on the same phase and neutral lines. This can lead to operational issues and potential damage. Ensure each module has its own dedicated wiring.
- LED Compatibility: This dimmer is designed for LED lights, incandescent lamps, and halogen lamps. Ensure your LED bulbs are specifically marked as 'dimmable' for best performance.
- S1 Terminal: The S1 terminal is designed to connect to a traditional push-button switch for manual control.
10. Warranty and Support
The AVATTO Tuya Smart Dimmer Switch Module comes with a 2-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or AVATTO customer service. Please have your product model number (ZDMS16) and purchase details ready when contacting support.
