Important Notice
Please note that the provided PDF document (S80549f38f2534568b42980734d425378n.pdf) appears to be a manual for a motion sensor (LKMSW002 Human Body Sensor) and not specifically for the Temperature and Humidity Sensor. The instructions below are compiled from the product description, available images, and general knowledge of similar smart home devices. Where specific details from the PDF are applicable (e.g., battery installation, general pairing steps), they have been adapted. For precise, product-specific instructions, please refer to any documentation included with your physical product or contact the manufacturer.
Compatibility Note: Zigbee products from this brand may not work with Tuya Zigbee hubs. Please ensure compatibility with your existing smart home ecosystem before setup.
1. Product Overview
The Haozee Smart WiFi/Zigbee Temperature and Humidity Sensor provides real-time monitoring of indoor environmental conditions. Featuring an LCD display, it shows current temperature and humidity readings directly. It supports smart automation, allowing integration with smart home systems like Home Assistant to trigger actions based on environmental changes (e.g., turning on an AC or humidifier).
Figure 1: Haozee Smart Temperature and Humidity Sensors
Figure 2: Sensor with Tuya and WiFi branding
2. Setup and Installation
2.1. App Installation
To control your Haozee sensor, you will need the companion mobile application. Search for "Meshhub" or "Tuya Smart" (depending on the specific model and ecosystem) in your mobile application store (App Store for iOS or Google Play Store for Android) and install the App.
Figure 3: Sensor features including Smart Automation and Phone Notifications
2.2. Activate the Sensor (Battery Installation)
- Locate the rear cover of the device.
- Slide down or open the rear cover to access the battery compartment.
- Insert two AAA batteries into the product, ensuring correct polarity.
- Close the rear cover securely.
Note: The sensor is designed for super low power consumption, with batteries lasting more than 500 days.
Figure 4: Low power consumption feature
2.3. Device Pairing
- After installing batteries, locate the reset/trigger button on the device.
- Long press the reset button for approximately 10 seconds and then release it. The device's LED indicator should start flashing (typically green), indicating it is in pairing mode.
- Open the installed mobile App (Meshhub or Tuya Smart).
- Click the "+" button (usually in the upper right corner) to add a new device.
- Select the appropriate sensor type (e.g., "Temperature and Humidity Sensor") from the list of available devices.
- Follow the on-screen instructions in the app to complete the pairing process. This may involve confirming the flashing LED or scanning a QR code if available.
2.4. Device Placement
Install the product in a location where it can accurately measure the ambient temperature and humidity. Avoid placing it:
- Near objects that may cause rapid temperature changes (e.g., air conditioners, fans, refrigerators, ovens).
- In direct sunlight, as this can lead to inaccurate readings.
- In areas with high airflow that might not represent the general room conditions.
For optimal performance, place the sensor at a height that is representative of the living space, typically around 1.5 to 2.2 meters above the ground.
3. Operating Instructions
3.1. Reading the Display
The sensor's LCD display shows the current temperature (in °F or °C) and humidity percentage. The display updates periodically to reflect changes in the environment.
3.2. App Monitoring
Once paired, open the mobile App to view real-time temperature and humidity data. The app typically provides historical data, graphs, and allows for unit conversion (°C/°F).
3.3. Smart Automation
The sensor can be integrated into smart scenes and automation routines within your smart home app (e.g., Tuya Smart, Home Assistant). This allows the sensor's readings to act as triggers for other smart devices.
- Example 1: Temperature Control
Set an automation to automatically turn on your smart air conditioner when the temperature detected by the sensor goes above a certain threshold. - Example 2: Humidity Control
Configure an automation to automatically turn on a smart humidifier when the humidity level detected by the sensor drops below a set percentage. - Example 3: Baby Care Mode
Monitor conditions in a baby's room to ensure optimal comfort.
Figure 5: Automation example for A/C control
Figure 6: Automation example for humidifier control
Figure 7: Sensor used in baby care mode
4. Maintenance
4.1. Battery Replacement
When the battery indicator on the LCD display or in the app shows low power, replace the AAA batteries. Follow the steps in Section 2.2 to open the battery compartment and insert new batteries.
4.2. Cleaning
Wipe the sensor's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device or affect its sensors.
4.3. Optimal Placement
Regularly check the sensor's placement to ensure it is not obstructed and is away from direct heat sources, cold drafts, or direct sunlight, which can lead to inaccurate readings.
5. Troubleshooting
- Sensor not pairing: Ensure the sensor is in pairing mode (LED flashing). Check your Wi-Fi network (2.4GHz only for WiFi version) or Zigbee hub connection. Make sure the sensor is within range of your router/hub.
- Inaccurate readings: Verify the sensor's placement. It should be away from direct sunlight, heat sources, or strong air currents. Ensure no physical obstructions are covering the sensor elements.
- No data in app: Check if the sensor is properly paired and connected to your network/hub. Ensure your mobile device has an internet connection.
- Short battery life: Ensure you are using fresh, good quality AAA batteries. Frequent reporting intervals (if configurable) can also reduce battery life.
- Zigbee compatibility: If using the Zigbee version, note that it may not work with all Tuya Zigbee hubs. Consider using a compatible Zigbee gateway or Home Assistant with Zigbee2mqtt for broader compatibility.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | haozee |
| Dimensions | 51 x 51 x 25 mm |
| Weight | 18g |
| Wireless Protocol | 2.4GHz Wi-Fi (for WiFi version), Zigbee (for Zigbee version) |
| Communication Method | Other (WiFi/Zigbee) |
| Power Source | Other (Battery powered) |
| Working Voltage | DC 3V |
| Battery Type | AAA (2x) |
| Battery Included | No |
| Wireless Communication | Yes |
| Inbox Adaptor | No |
| Hign-concerned Chemical | None |
| Origin | Mainland China |
Note: Specifications regarding 'Detection radius' and 'Detection angle' found in the provided PDF are for a motion sensor and are not applicable to this temperature and humidity sensor.
7. User Tips
- Home Assistant Integration: Many users report seamless integration with Home Assistant via Zigbee2mqtt or the Tuya Official integration. Ensure your Home Assistant setup is up-to-date for best compatibility.
- Accuracy Adjustment: Some smart home platforms or the device's app may offer options to calibrate or adjust temperature and humidity readings if you find minor discrepancies.
- Battery Life: While advertised as low power, actual battery life can vary. Using quality batteries like Energizer or Duracell can help maximize operational time.
- Mounting Options: The sensor typically comes with adhesive for wall mounting. If you prefer a vertical desk placement, you might need a separate stand accessory.
- Reporting Frequency: The frequency at which the sensor reports data can impact battery life and responsiveness. Check your app settings for configurable reporting intervals.
8. Frequently Asked Questions (FAQ)
- Q: The manual I received is for a motion sensor. Where can I find the correct manual for the temperature and humidity sensor?
- A: We apologize for the discrepancy. This document serves as a general guide based on product information. Please check the manufacturer's website or contact customer support for the most accurate and up-to-date manual specific to your temperature and humidity sensor model.
- Q: How long do the batteries last on the Zigbee model?
- A: The sensor is designed for super low power consumption, with batteries expected to last more than 500 days with AAA batteries. Actual battery life can vary based on usage, reporting frequency, and battery quality.
- Q: Does the sensor have a calibration process?
- A: Some smart home platforms or the companion app may offer options to offset or calibrate temperature and humidity readings. Please check the settings within your specific app or smart home system.
- Q: What is the reporting frequency of the WiFi version?
- A: The reporting frequency can vary and may be configurable within the mobile application. Typically, these sensors report changes in temperature/humidity or at set intervals (e.g., every few minutes). Refer to your app's device settings for details.
- Q: Do I need another device to connect to it outside the home?
- A: For the WiFi version, as long as the sensor is connected to your home WiFi network and your phone has internet access, you can monitor it remotely. For the Zigbee version, you will need a Zigbee gateway/hub connected to your internet to access the sensor data when you are away from home.
9. Warranty and Support
For warranty information, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.