Introduction
Congratulations on your purchase of the CYCLAMI RT01 Intelligent Radar Tail Light. This manual provides detailed instructions on the features, installation, operation, and maintenance of your new device to ensure optimal performance and safety during your rides.
The RT01 is designed to enhance cyclist safety by detecting approaching vehicles from behind and providing visual warnings. It combines a powerful LED tail light with advanced millimeter-wave radar technology.

Figure 1: CYCLAMI RT01 Intelligent Radar Tail Light overview.

Figure 2: Front view of the RT01 Radar Taillight.
Key Features
- High Visibility: Equipped with 20x2835 ultra-bright red LEDs, visible from up to 500 meters.
- Advanced Radar Sensing: Utilizes millimeter-wave radar to detect objects approaching within a 30-meter range, covering a horizontal angle of 54 degrees and a vertical angle of 27 degrees.
- Intelligent Warning System: Triggers radar warnings when the speed of a vehicle behind you is greater than your speed by more than 10 KM/hour. It also detects motorcycles or bicycles within 20 meters.
- Smart Filtering: The CYCLAMI chip intelligently filters out low-speed moving objects like pedestrians or hand waving to avoid false alarms.
- Multiple Lighting Modes: Offers various modes to suit different riding conditions and preferences.
- Durable Design: Meets IPX6 waterproof rating, making it suitable for various outdoor environments.
- Rechargeable Battery: Features a built-in polymer lithium battery with a long lifespan (up to 500 charge cycles) and convenient Type-C charging.
Package Contents
Please check the box for the following items:
- RT01 Radar Tail Light
- User Manual
- Wrench
- Saddle Bracket
- TYPE-C USB Cable
- Seat Post Bracket

Figure 3: Package contents of the RT01 Radar Tail Light.
Setup
Installation
The RT01 can be installed in two ways: on the seat tube using a silicone strap or under the seat cushion using a saddle bracket.

Figure 4: Installation methods for the RT01.
Installation on the Seat Tube:
- Insert the end of the silicone strap into the flat hole of the base.
- Place the base against the seat tube and wrap the silicone strap around the seat tube.
- Hook one hole of the silicone strap onto the base's slot.
- Pull the remaining silicone strap backward and hook the other hole onto the base's slot.
- Align the bottom buckle of the lamp head with the notch on the base, press it in, and rotate it 45 degrees to secure.
- Installation is complete.
Installation Under the Seat Cushion:
- Attach the left and right fasteners of the lamp holder to the seat bow, then insert the left and right screws.
- After adjusting the position of the lamp holder, tighten the left and right screws.
- Align the bottom buckle of the lamp head with the notch on the lamp holder, press it in, and rotate it 45 degrees to secure.
- Installation is complete.
Charging the Device
Before first use, fully charge the device.
- Open the waterproof charging plug at the bottom of the product.
- Insert the TYPE-C plug of the provided charging cable into the charging port.
- Insert the USB plug of the charging cable into any 5V USB charger (not included).
Charging Indicators:
- Red breathing flash: Battery capacity < 99% (charging in progress).
- Green light solid: Battery capacity > 99% (charging complete).

Figure 5: RT01 Tail Light during charging.
Operating Instructions
The RT01 features two independent buttons for controlling normal light modes and radar functions.

Figure 6: Independent switches and components of the RT01.
Regular Light Button (Top Button)
- Short press (within 5 seconds): Cycles through the seven normal light modes: Bright > Strobe > Slow Strobe > Warning Strobe > Breathing > Climbing Snake > Double Snake.
- Short press (after 5 seconds in a mode): Turns the light OFF.
- Long press: Forces the light OFF.
Radar Mode Button (Bottom Button)
- Short press (to turn ON): The indicator light turns blue, and the radar function is activated.
- Short press (within 5 seconds while ON): Cycles through the three radar light modes: Bright > Strobe > Fast Breathing.
- Short press (after 5 seconds in a radar mode): Turns the radar light OFF.
- Long press (to turn OFF): The indicator light turns green, and the radar function is deactivated.

Figure 7: Lighting customization modes and durations.
Radar Functionality
The RT01's radar system is designed to provide intelligent warnings for approaching vehicles.
- Sensing Distance: Monitors vehicles within 30 meters behind you.
- Warning Trigger: The RT01 will trigger a radar warning (e.g., increased brightness or specific flash pattern) when the speed of the vehicle behind is greater than your speed by more than 10 KM/hour.
- Motorcycle/Bicycle Detection: Triggers radar warning within 20 meters for motorcycles or other bicycles.
- Intelligent Filtering: The built-in CYCLAMI chip intelligently filters out low-speed moving objects such as pedestrians or hand waving, preventing unnecessary radar flashes and dazzling lights.

Figure 8: Radar monitoring scope and visual distance.

Figure 9: Radar Taillight vs. Brake Taillight comparison.

Figure 10: Intelligent filtering of the radar sensor.
Battery Indicator
During product use, the indicator light provides battery status:
- Blue light: Radar function is ON.
- Green light: Battery capacity is ≥ 10%.
- Red flashing light: Battery capacity is < 10%.
Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Water Resistance: The product has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. It is not designed for submersion.
- Storage: If the product will not be used for an extended period, fully charge it and store it in a cool, dry place. Recharge the device once every three months to maintain battery health.
- Disassembly: Do not attempt to disassemble the product yourself. Unauthorized disassembly may void the warranty and could lead to damage or injury.
Troubleshooting
- Light not turning on: Ensure the device is charged. If the battery is low, charge it using the provided Type-C cable.
- Radar not triggering: Verify that the radar function is activated (blue indicator light). Ensure the approaching object is moving faster than your bicycle by more than 10 KM/hour and is within the 30-meter detection range. The system is designed to filter out slow-moving objects like pedestrians.
- Radar false alarms: The intelligent filtering system minimizes false alarms. If you experience frequent false alarms, ensure no objects are consistently close to the sensor that might be misinterpreted.
- No connectivity to cycling computer/app: The CYCLAMI RT01 is designed to function as a standalone radar tail light. It does not support connection or pairing with cycling computers (e.g., Garmin, Wahoo, Magene, Bryton) or smartphone applications via Bluetooth or other protocols. Its radar function operates independently, primarily by adjusting its own light output based on detected threats.
Specifications
| Feature | Detail |
|---|---|
| Model | RT01 |
| Type | Tail Light |
| Brand Name | CYCLAMI |
| Origin | Mainland China |
| Body Material | Plastic (ABS engineering plastic) |
| Power Supply | Battery (Built-in Polymer Lithium Battery) |
| Intelligent Sensing | Yes |
| Waterproof Level | IPX6 |
| Support Dimmer | 2 - 4 Files |
| Certification | CE, FCC, RoHS |
| LED Type | 20x2835 Ultra bright red light LED |
| Visible Distance | 500m |
| Radar Sensing Distance | 30m |
| Radar Horizontal Angle | 54 degrees |
| Radar Vertical Angle | 27 degrees |
| Work Time (Approx.) | Bright: 4h, Breathing: 4.5h, Strobe: 5.5h, Slow Strobe: 13h, Warning Strobe: 11h, Climbing Snake: 36h, Double Snake: 36h |
| Size | 59x39x31mm |
| Weight | 60g |
For a comprehensive overview of the product, you may refer to the User Manual (PDF).
Warranty and Support
Warranty Regulations:
- The manufacturer provides a three-year free warranty service for quality problems or defects arising from the product itself.
- The warranty period for the battery is 6 months.
- Product defects or damages caused by improper use, unauthorized modification, or repair are not covered by the warranty.
Important Precautions:
- This product is designed for IPX6 protection grade. Do not immerse it in water or expose it to fire. Avoid prolonged exposure to direct sunlight.
- When operating this product, always prioritize safety and ensure you are in a secure environment.
- Do not allow non-professional personnel to disassemble this product.
User Tips
Based on feedback from other users, here are some helpful tips for using your RT01 Radar Tail Light:
- The radar function is highly effective at detecting approaching vehicles and significantly improves safety.
- Many users appreciate the variety of lighting options available, allowing customization for different riding conditions.
- Consider using the radar-only mode for optimal battery life, as it activates the light only when a vehicle approaches.
- Please note that this device does not connect to cycling computers (such as Garmin, Wahoo, Magene, or Bryton) or smartphone apps. It operates as a standalone safety device.
- The device does not have an automatic on/off function based on ambient light; it requires manual activation.
- There is no alarm function if the bicycle is touched, nor does it emit audio alerts for the rider.
Product Video
Official product video demonstrating the CYCLAMI RT01 Radar Tail Light's features, including its radar detection capabilities, various light modes, and IPX6 waterproof rating.