PUSR USR-AP310i

Contents

PUSR WiFi6 Ceiling AP Dual Band Wireless Access Point AX3000 User Manual

Model: USR-AP310i

Your Trustworthy Smart Industrial IoT Partner

1. Introduction

1.1. Overview

The PUSR AP/NR310i is a high-performance, ceiling-mounted AX3000 Wi-Fi 6 dual-band Access Point, offering an optional 5G NR module for enhanced connectivity. Built on a powerful Qualcomm wireless core, it delivers robust performance with a strong 25dBm transmission power and integrated external antennas for extensive coverage.

It supports a wide range of IEEE 802.11 protocols (a/b/g/n/ac/ax), achieving a maximum Wi-Fi access rate of up to 3000Mbps. The device is equipped with 512MB of RAM, with customizable options available from 256MB to 1GB.

The integrated 5G NR Sub-6GHz M.2 module is designed for IoT/eMBB applications, utilizing 3GPP Release 16 technology to support both 5G NSA and SA networking. It is also backward compatible with 4G/3G networks, providing a reliable backup for wired broadband and cellular networks. This ensures a sustained and reliable internet connection, especially in scenarios without traditional wired broadband access.

The AP310i's superior performance and stability are a result of its high-end Qualcomm core platform and professional hardware and software design. It is ideally suited for diverse industrial and commercial environments, including enterprise offices, educational institutions, smart healthcare facilities, apartment complexes, dormitories, exhibition halls, and conference rooms.

PUSR WiFi6 AX3000 Dual-band Ceiling AP
Figure 1: PUSR WiFi6 AX3000 Dual-band Ceiling AP (USR-AP310i)

2. Features

  • High-Performance Wi-Fi 6: Supports AX3000 Wi-Fi 6 with M.2 5G SA/NSA Sub 6GHz Router (NR310i).
  • Advanced 5G NR Technology: Employs 3GPP Rel. 16 technology, supporting both 5G NSA and SA modes, compatible with major global carriers.
  • Dual-Frequency MU-MIMO: Supports Wi-Fi 6 (802.11ax) standard, 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling simultaneous data transmission to multiple devices.
  • Flexible AP Modes: Functions as both a Fat AP (independent web page management) and a Fit AP (managed by a wireless controller/AC).
  • 2.5G High-Speed Ethernet Port: Features a 2.5Gbps Ethernet port, significantly improving wired network speed compared to traditional Gigabit ports, ideal for broadband services over 1000Mbps.
  • Versatile WAN/LAN Configuration: WAN port can be configured for landline internet, with 4G/5G connection serving as a reliable backup. Supports automated failover/failback between Ethernet, Cellular, and Wi-Fi.
  • Multiple SSID Support: Allows for the creation of multiple Service Set Identifiers for network segmentation.
  • High-Power WiFi: Wireless transmission power up to 25dBm ensures stronger signals, greater coverage, and enhanced penetration capabilities.
  • Built-in Surge Protection: Integrated 2kV surge protection design safeguards the device in complex electrical environments, ensuring long-term service reliability.

3. Setup & Installation

3.1. Physical Installation

The AP310i is designed for easy ceiling and wall mounting, allowing for flexible deployment in various environments.

Wall and Ceiling Mounting Options
Figure 2: Wall Mounting and Ceiling Mounting options for the AP310i.

3.2. Powering the Device

The AP310i can be powered using two methods:

  • Standard PoE (Power over Ethernet): Supports IEEE 802.3at standard PoE, allowing power and data transmission over a single Ethernet cable. This simplifies wiring and reduces installation costs.
  • DC 12V Power: Can also be powered via a standard DC 12V power source.
PoE and DC Power Diagrams
Figure 3: Powering the AP310i via Standard PoE or DC 12V.

3.3. Initial Network Connection

To begin configuration, connect your PC to the LAN port of the AP310i. Set your PC's IP address to a static IP within the same network segment as the AP, for example, 192.168.1.101. The default IP address of the AP is 192.168.1.1.

You can verify the network connection by opening a command prompt on your PC and executing the command: ping 192.168.1.1. A successful ping indicates that the network is connected.

Hardware Interface with LAN Ports
Figure 4: Rear view of the AP310i showing LAN ports.

3.4. Web Interface Login

Open a web browser and enter the default IP address of the AP (192.168.1.1) into the address bar. This will navigate you to the login page. The default username and password are both admin.

Login Page Screenshot
Figure 5: Web interface login page.

4. Operating Modes

The AP310i supports three primary operating modes, allowing for flexible deployment based on your network requirements:

  • Wireless Router Mode: Functions as a primary router, managing network traffic and providing internet access.
  • Access Point Mode: Extends an existing wired network by providing wireless connectivity.
  • Wireless Repeater Mode: Extends the range of an existing wireless network.
Router, Access Point, Wireless Repeater Modes Diagram
Figure 6: Diagram illustrating Router, Access Point, and Wireless Repeater modes.

Fat AP vs. Thin AP Modes

The device supports both Fat AP and Thin AP modes, offering adaptability for different network scales:

  • Fat AP Mode: Each AP can be managed flexibly and independently via its web interface. This mode is suitable for smaller networks with only a few APs, allowing for quick and flexible deployment.
  • Thin AP Mode: All APs are centrally managed by a dedicated controller (AC). This mode is ideal for medium-sized and larger networks, where the controller can remotely deliver configurations to all APs and support remote firmware upgrades.

5. Configuration

The web interface provides comprehensive settings for managing your AP310i. The left column of the interface is divided into several menu pages for easy navigation.

5.1. System Status

This page displays essential information about the router, including system details, WAN port status, LAN port information, and WLAN status. It provides a quick overview of the device's current operational state.

System Status Page Screenshot
Figure 7: Screenshot of the System Status page.

5.2. Mobile Network

This section provides information about the mobile network connection, including SIM card details, 5G module information, and supported 5G and 4G LTE bands.

5.3. Internet Accessing Settings

  • Mode Selecting: Choose between Router mode and AP mode based on your network setup.
  • Ethernet Port Setting: Configure WAN/LAN switching and monitor the connection status of the Ethernet ports.
  • WAN Settings: Set parameters for the WAN port, including DHCP client, static IP, or PPPoE. You can also clone the MAC address.
  • Wireless Repeater: Scan for nearby Wi-Fi SSIDs, select the desired network, enter the password, and choose the frequency to extend your wireless coverage.
  • 5G AT: Access and configure the 5G module using AT commands.
  • 5G NR Settings: Enable/disable 5G NR, select the base station, enter the APN, and provide the SIM card PIN code if required.

5.4. WLAN Settings

This section allows detailed configuration of your wireless networks:

  • 2.4G Settings: Configure SSID, password, hide SSID, enable/disable AP Isolation, set country, channel, wireless protocol (802.11ax/n/g/b), bandwidth (HT20/HT40), WPA3 encryption, and 802.11r protocol.
  • 5G Settings: Similar configuration options as 2.4G, including SSID, password, AP Isolation, channels (36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165), wireless protocol (802.11ax/ac/n/a/a), bandwidth (HT20/HT40/HT80/HT160), WPA3 encryption, and 802.11r protocol.
  • Signal Selecting: Adjust signal strength to Energy Saving, Normal, or Penetration modes based on your coverage needs.

5.5. LAN Network Settings

Configure the LAN IP address, Subnet Mask, and DHCP service settings for the AP310i. When DHCP is enabled, the device can assign IP addresses to connected clients within a specified range.

5.6. Login Settings

This page allows you to change the login password for the web management interface.

5.7. Client List

View a list of connected clients, including DHCP clients, Wi-Fi clients, and manage IP Binding for specific devices.

6. Maintenance

6.1. Software Upgrading

The software upgrading section provides tools for maintaining your device:

  • Firmware Upgrading: Update the device firmware. You can choose to upload a firmware file manually or perform an online upgrade.
  • Backup/Restore Configuration: Save the current device configuration to a file for backup purposes, or restore a previously saved configuration.
  • Time & Date: Set the system time and date.
  • Reboot: Restart the AP device.
  • Restore Factory Settings: Reset the device to its default factory configuration.

7. Troubleshooting

  • No Internet Access (Red Indicator): If the indicator light is red, it signifies that the device cannot access the internet successfully. Check your WAN settings and physical connections.
  • Network Connectivity Issues: Use the ping 192.168.1.1 command from a connected PC to verify basic network connectivity to the AP.
  • Web Interface Access: Ensure your PC's IP address is in the same subnet as the AP (default 192.168.1.x) when trying to access the web interface at 192.168.1.1.
  • Maximum Connected Users: The AP310i supports up to 256 end users simultaneously. If you experience performance issues with a high number of clients, consider optimizing your network or adding more APs.
  • Coverage Area: The device offers strong signals and broad coverage due to its 25dBm TX power and 5dBi antennas. For very large or complex environments, consider a multi-AP deployment for seamless roaming.

8. Specifications

Category Attribute Value
General Brand Name PUSR
Model Number USR-AP310i
Certification FCC
Wireless Wireless Protocol 802.11a/b/g/n/ac/ax
Wi-Fi Security Open, WPA, WPA2PSK TKIPAES, WAP2 EAP, WPA3
Operating Modes Wireless router mode, Access point mode, Repeater mode
End Users 256
TX Power 24dBm
Mobile (Optional) 5G NR Module Qualcomm Snapdragon X62
Antennas Internal high gain antenna*4
SIM Card 1 x Mini SIM(2FF), Push-push type
Ethernet Interface WAN Port 1 x 2.5Gigabit WAN RJ45, 10/100/1000 Mbps, auto MDI/MDIX
LAN Port 1 x 1Gigabit LAN RJ45, 10/100/1000 Mbps, auto MDI/MDIX
Power Supply Power Input 48V PoE input over WAN
Power Consumption 15W
Standard IEEE 802.3at standard
Physical Characteristics Housing Plastic
Dimension 190*190*42mm (L*W*H)
Installation Ceiling mounting
Operating Temperature 0°C ~ +40°C

9. User Tips

  • Pre-Installation Check: Before mounting, ensure all necessary network cables and power sources are ready. A user noted, "this ap is still waiting to be installed," highlighting the importance of preparation.
  • Extending Network Coverage: If you're looking to create a mesh network or extend coverage, utilize the device's Wireless Repeater mode. This can help bridge gaps in your existing Wi-Fi.
  • Multiple SSIDs: The AP310i supports multiple SSIDs. Consider creating separate SSIDs for different purposes (e.g., guest network, IoT devices) to enhance security and network management.
  • High Client Capacity: With support for up to 256 end users, this AP is well-suited for high-density environments. However, for optimal performance, ensure your backhaul connection can handle the aggregate traffic.

10. Warranty & Support

10.1. Contact Information

For technical support, inquiries, or warranty information, please contact Jinan USR IOT Technology Limited:

  • Address: Floor 12 and 13, CEIBS Alumni Industrial Building, No. 3 Road of Maolingshan, Lixia District, Jinan, Shandong, China
  • Official Website: https://www.pusr.com
  • Technical Support: http://h.usriot.com/
  • Inquiry Email: inquiry@usriot.com
  • Skype & WhatsApp: +86 13405313834

10.2. Disclaimer

The information provided in this document is in connection with Jinan USR IOT Technology Ltd. and/or its affiliates' products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of USR IoT products. EXCEPT AS SET FORTH IN THE TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR THIS PRODUCT, USR IoT AND/OR ITS AFFILIATES ASSUME NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL USR IOT AND/OR ITS AFFILIATES BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF USR IOT AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. USR IoT and/or its affiliates make no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. USR IoT and/or its affiliates do not make any commitment to update the information contained in this document.

© 2024 PUSR. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.