Introduction
This manual provides instructions for the installation, operation, and maintenance of the EARUELETRIC EAWCBT-P Tuya WiFi Smart Circuit Breaker. This device is a miniature circuit breaker (MCB) with smart functionalities, allowing for remote control, voice control, timing, and real-time monitoring of electricity consumption. It also features various protection functions including over-current, over-voltage, under-voltage, temperature, and wattage protection.
Specifications
| Parameter | Value |
|---|---|
| Model Number | EAWCBT/EAWCBE |
| Rated Voltage | AC80-240V |
| Rated Current | 1-63A |
| Rated Frequency | 50/60Hz |
| Poles | 1P+N |
| Operating Temperature | -25°C to 70°C |
| Connection | 2.4G WiFi (5G not supported) / Zigbee |
| APP | Tuya & Smart Life / eWeLink |
| Over-Current Protection | 1-63A (Adjustable, ON/OFF) |
| Over-Voltage Protection | 220-265V (Adjustable, ON/OFF) |
| Under-Voltage Protection | 76-240V (Adjustable, ON/OFF) |
| Temperature Protection | 40-150°C (Adjustable, ON/OFF) |
| Wattage Protection | 1-26KW (Adjustable, ON/OFF) |
| Mounting | 35mm Din Rail |
| Certification | CE/FCC |
Note: Over-current, over-voltage, under-voltage, temperature protection, and wattage protection functions are off by default. Only EAWCBT-P has these protection functions.
Key Functions
- Energy Consumption Monitor: Track real-time current, voltage, and power status, and record energy consumption data over various time periods (years, months, days).
- Remote Control: Control the device from anywhere in the world using the mobile app (phone must have internet signal).
- Voice Control: Compatible with smart speakers like Amazon Alexa and Google Home Assistant after binding the account on the Tuya/Smart Life/eWeLink App.
- Countdown: Set the product to turn on or off after a specified countdown period.
- Professional Timing: Schedule specific times for the switch to turn on or off.
- Sharing Devices: Share control of the device with family and friends.
- Protection Functions: Includes Over-Current, Over-Voltage, Under-Voltage, Temperature, and Wattage Protection (adjustable thresholds, ON/OFF).
- Power-off Memory: Retains the last state before a power outage.
Setup and Installation
1. Wiring and Dimensions
Ensure proper wiring according to the diagram below. Dimensions are approximate and may have slight variations.

- Input: Connect Neutral (N) and Live (L) wires to the "IN" terminals.
- Output: Connect Neutral (N) and Live (L) wires to the "OUT" terminals.
- Indicator Lights: Green power indicator means power is on. Red WiFi indicator light fast blinking means entering network pairing mode.
- Pairing Button: Press and hold the button for 5-10 seconds to initiate network pairing.
2. Mobile APP Download
To use the smart features, download the "Tuya" or "Smart Life" app. You can scan the QR codes below or search for the app in your device's app store.

3. Network Settings and Device Pairing
Follow these steps to connect your circuit breaker to the mobile app:
- Ensure your mobile phone is connected to a 2.4GHz WiFi network (5GHz networks are not supported).
- Open the Tuya or Smart Life app.
- Tap the "+" or "Add Device" button in the app.
- The app will search for nearby devices. If not found automatically, you may need to manually select the device type (e.g., "Socket" or "Power Strip" under "Electrical").
- On the circuit breaker, press and hold the button for 5-10 seconds until the red WiFi indicator light starts blinking rapidly, indicating it's in pairing mode.
- In the app, confirm that the device is blinking rapidly.
- Enter your 2.4GHz WiFi network password when prompted.
- The app will then attempt to connect to the device. Once successfully added, you can rename the device and assign it to a location.
Operating Instructions
Once the device is successfully paired with the app, you can utilize its smart features:
- Remote ON/OFF: Tap the switch icon in the app to turn the circuit breaker on or off remotely.
- Electricity Statistics: Navigate to the "Electricity" tab in the app to view real-time power, voltage, current, and historical energy consumption data (daily, monthly, yearly).
- Timing Functions:
- Schedule: Set specific times for the device to turn on or off on selected days of the week.
- Sunrise/Sunset: Configure the device to operate relative to local sunrise or sunset times.
- Circulate: Set the device to cycle on and off repeatedly within a defined period.
- Countdown Timer: Set a countdown in the "Settings" menu for the device to automatically turn off after a specified duration (up to 24 hours).
- Alarm Settings (Protection Functions):
In the "Alarm Setting" menu under "Settings", you can enable and configure thresholds for various protections. These functions are off by default.
- Over-Current Alarm (A): Set a threshold (recommended range 1-63A). If current exceeds this, the breaker can trip.
- Over-Voltage Alarm (V): Set a threshold (recommended range 220-265V). If voltage exceeds this, the breaker can trip.
- Under-Voltage Alarm (V): Set a threshold (recommended range 76-240V). If voltage drops below this, the breaker can trip.
- High Temperature Alarm (°C): Set a threshold (recommended range 40-150°C).
- Wattage Protection (KW): Set a threshold (recommended range 1-26KW).
- Relay Status: In "Settings", configure the device's state after a power outage (OFF, ON, or Memory - retaining the last state).
- Light Mode: Adjust the indicator light behavior in "Settings".
- Maintenance Lock: Power off the device or press the button 4 times to release the maintenance lock.
- Log: View switch logs, alarm logs, and setting logs in the app.
Maintenance
To ensure optimal performance and longevity of your smart circuit breaker:
- Regularly check wiring connections for tightness and signs of wear.
- Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning.
- Avoid exposing the device to extreme temperatures or humidity outside its specified operating range (-25°C to 70°C).
- Periodically check for app updates to ensure you have the latest features and security patches.
Troubleshooting
- Device not connecting to WiFi:
- Ensure your router is broadcasting a 2.4GHz WiFi signal. 5GHz is not supported.
- Verify that your phone is connected to the 2.4GHz network during pairing.
- Make sure the WiFi indicator light on the device is blinking rapidly (pairing mode). If not, press and hold the button for 5-10 seconds.
- Check your WiFi password for accuracy.
- Try moving the device closer to your WiFi router.
- Perform a device reset by powering it off and on, then re-attempt pairing.
- Device not responding to app commands:
- Check your phone's internet connection.
- Verify the device's WiFi connection status in the app.
- Ensure the device has power.
- If the issue persists, try re-pairing the device with the app.
- Protection functions not working:
- Remember that all protection functions (over-current, over-voltage, etc.) are OFF by default.
- Access the "Alarm Setting" menu in the app and enable the desired protection functions and set appropriate thresholds.
User Tips
- For initial setup, ensure your phone is connected to a 2.4GHz Wi-Fi network. Some users reported difficulty connecting, which was resolved by ensuring the correct Wi-Fi band was used.
- The device works well once connected, offering convenient remote control and monitoring.
- Remember to enable and set thresholds for protection functions in the app, as they are off by default.
Warranty and Support
For technical support or warranty inquiries, please contact the manufacturer:
ZHEJIANG OUYOU (EARU) ELECTRONICS CO., LTD.Address: YAMING ROAD 38, XIANGYANG INDUSTRY AREA, LIUSHI TOWN, YUEQING CITY, ZHEJIANG PROVINCE, CHINA
Email: bob@earuelec.com
A user manual in PDF format is available for download: View User Manual (PDF)