SUNMEIYI AG5598

Contents

SUNMEIYI Modern LED Pendant Light User Manual

1. Important Safety Instructions

Please read all instructions carefully before installation and use. Keep this manual for future reference.

  • Electrical Safety: Always turn off the main power supply at the circuit breaker before installation, cleaning, or maintenance to prevent electric shock. Installation should be performed by a qualified electrician.
  • Handling: Handle the product gently to avoid scratching or damage. Keep the product away from children to prevent injury.
  • Installation Surface: Ensure the ceiling is structurally sound and can firmly support the fixture to prevent loosening and falling.
  • Wiring: Connect the live (L) and neutral (N) lines correctly. Do not reverse the connections. Ensure hands are dry during installation.
  • Environment: This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
  • Modifications: Do not alter the product's circuit or components.
  • Assembly: Assemble the product completely before mounting it to the ceiling.
  • Cleaning: Use only non-corrosive cleaning agents.
  • Gloves: Wear gloves during installation.

Voltage: This fixture supports AC220-265V, 50/60Hz.

2. Package Contents

Please check that all parts are present and undamaged:

  • LED Pendant Light Fixture (main body with rings)
  • Mounting Bracket
  • Mounting Hardware (screws, anchors)
  • User Manual (this document)

3. Setup and Installation

Tools Required: Screwdriver, Drill, Wire Strippers, Pliers, Pencil, Measuring Tape.

  1. Prepare the Fixture: Carefully unpackage the LED pendant light fixture.
  2. Power Off: Locate the circuit breaker for the room where you will install the light and turn off the power supply. Verify that the power is off using a voltage tester.
  3. Install Mounting Bracket:Installation Diagram for SUNMEIYI LED Pendant Light

    Figure 3.1: Installation Diagram

    1. Mark the drilling points on the ceiling where the mounting bracket will be installed.
    2. Drill pilot holes and insert wall anchors if necessary.
    3. Secure the mounting bracket to the ceiling using the provided screws.
  4. Wire Connections:
    1. Carefully connect the electrical wires from the ceiling to the fixture's wires.
    2. Connect the Live (L) wire from the ceiling to the Live wire of the fixture.
    3. Connect the Neutral (N) wire from the ceiling to the Neutral wire of the fixture.
    4. If present, connect the Ground (GND) wire from the ceiling to the Ground wire of the fixture.
    5. Ensure all connections are secure using wire nuts and electrical tape.
  5. Mount the Fixture:
    1. Carefully lift the lamp body and align it with the mounting bracket.
    2. Attach the lamp body to the mounting bracket, securing it with the provided screws or fasteners.
    3. Ensure the fixture is firmly attached and stable.
  6. Restore Power: Once the installation is complete and secure, turn the power back on at the circuit breaker.

4. Operating Instructions

This LED pendant light features 3-color changing functionality controlled by your standard wall switch.

  1. Turn On/Off: Use your wall switch to turn the light on or off.
  2. Change Color Temperature: To cycle through the color temperatures (White, Warm, Neutral), simply toggle your wall switch OFF and then ON again in quick succession.
    • First ON: White Light
    • Second ON (after quick OFF/ON): Warm Light
    • Third ON (after quick OFF/ON): Neutral Light (a mix of white and warm light)

5. Maintenance

Regular maintenance will help prolong the life and appearance of your LED pendant light.

  • Cleaning: Always turn off the power supply before cleaning. Use a soft, dry cloth to wipe down the fixture. For more stubborn dirt, a slightly damp cloth with a mild, non-corrosive cleaning agent can be used. Avoid abrasive cleaners or solvents.
  • Inspection: Periodically check the fixture for any loose connections or damage. If any issues are found, turn off the power and consult a qualified electrician.
  • LEDs: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.

6. Troubleshooting

If you encounter any issues with your LED pendant light, please refer to the following common solutions:

ProblemPossible CauseSolution
Light does not turn onNo power supplyCheck the circuit breaker and wall switch. Ensure all wiring connections are secure.
Light flickersLoose wiring connectionTurn off power and check all wire connections. Consult an electrician if unsure.
Incorrect color changeSwitching too slowlyEnsure you toggle the wall switch OFF and ON quickly to cycle through colors.
Light is dimIncorrect voltage or faulty LEDEnsure the fixture is receiving the correct voltage (AC220-265V). If problem persists, contact support.

If the problem persists after trying these solutions, please contact customer support.

7. Specifications

SUNMEIYI LED Pendant Light Dimensions and Power

Figure 7.1: Product Dimensions and Power Specifications

FeatureSpecification
Brand NameSUNMEIYI
Model NumberAG5598
Item TypePendant Lights
StyleModern Style
Installation TypeCord Pendant
Light SourceIntegrated LED bulbs
Bulbs IncludedYes
PCBA IncludedYes
Number of Light Sources1 (integrated LED system)
Luminous Flux60-249 Lumens (range)
Power SourceAC
Voltage220-265V ~ 50/60Hz
DimmableNo (3-color switchable via wall switch)
Switch TypeWall Switch (for color change)
FinishIron
MaterialMetal, Acrylic
TechnicsForged
Body Colors AvailableBlack, White, Gold
Lighting Area3-5 square meters
Recommended PlaceParlor, Study, Master Bedroom, Other Bedrooms, Hotel Hall, Hotel Room
CertificationCE
OriginMainland China
Power Consumption (3-color, no remote)144W
Power Consumption (Dimmable with remote option)60W (Note: This model is 3-color switchable, not dimmable)
Ring Dimensions20cm, 40cm, 60cm (diameters)
Package Dimensions (L x W x H)62cm x 62cm x 5cm
Package Weight1.58 kg

8. User Tips

  • Power Consumption: Be aware that the 3-color version of this light has a power consumption of 144W. This is a significant output for bright illumination.
  • Color Cycling: Practice the quick OFF/ON toggle with your wall switch to smoothly cycle through the white, warm, and neutral light settings.
  • Professional Installation: For safety and optimal performance, always consider professional installation, especially if you are not familiar with electrical wiring.

9. Warranty and Support

This SUNMEIYI LED Pendant Light comes with a 1-year warranty from the date of purchase, covering manufacturing defects.

For warranty claims, technical support, or any questions regarding your product, please contact the seller or retailer from whom you purchased the item. Please have your proof of purchase and model number (AG5598) ready.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.