COXO 3 Row COB LED Strip

Contents

COXO 3-Row COB LED Strip Lights User Manual

Model: 3 Row COB LED Strip

Introduction

Thank you for choosing COXO 3-Row COB LED Strip Lights. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your LED strip lights. These ultra-bright, flexible, and dimmable LED strips are designed for various lighting applications, offering high color rendering and a dot-free luminous surface.

COXO 3-Row COB LED Strip Lights, showcasing ultra-bright illumination.
COXO 3-Row COB LED Strip Lights, showcasing ultra-bright illumination.

Safety Information

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Ensure the power supply is disconnected before any installation or maintenance.
  • Only use the specified DC24V power supply. Connecting directly to 110V/220V AC electricity will damage the LED strips.
  • Pay close attention to polarity (+ and -) when connecting components. Incorrect polarity can damage the LEDs.
  • Do not bend the LED strip sharply or apply excessive force, as this may damage the internal circuitry.
  • Avoid installing in wet locations unless using a specifically rated waterproof strip (IP65, IP67, IP68). This product is generally not waterproof.
  • Keep out of reach of children.

Package Contents

The package typically includes:

  • COXO 3-Row COB LED Strip Light (5 meters)
  • (Power supply, controllers, and connectors are usually sold separately or as part of a kit, not included with the strip itself unless specified.)

Specifications

Attribute Value
Brand NameCOXO
Model Number3 Row COB LED Strip
Item TypeStrip
Strip typeCOB
VoltageDC24V
Nominal VoltageDC24V
Power SourceDC
Power GenerationSwitch
LEDs Number/M960
Specifications (light beads / m)960
Luminous Flux2000-82000 (Total for 5m: 13000 lumen, 2600 lumen/m)
LED Chip BrandSANAN
LED Chip Model5000
Color Temp(K)3000K-6500K (Warm White, Natural White, Cold White options)
Ra (CRI)>90
Average Life (hrs)5000
Length5 meters / 16.4 ft
PCB Width15mm
Cutting Unit50mm
WaterproofNo
Is Smart DeviceYes
Is Batteries IncludedNo
CertificationCCC, ce, EMC, FCC, ROHS, UL
OriginMainland China
Technical specifications diagram for the COB LED strip, including PCB width, LED quantity, voltage, power, cutting unit, lumen, CRI, and length.
Technical specifications diagram for the COB LED strip, including PCB width, LED quantity, voltage, power, cutting unit, lumen, CRI, and length.
Features diagram highlighting bendability, large luminous surface, cuttable sections, and double-sided tape for easy installation.
Features diagram highlighting bendability, large luminous surface, cuttable sections, and double-sided tape for easy installation.

Setup and Installation

1. Pre-Installation Steps

  1. **Test Supplies:** Before mounting, test all components including LED strips, power supply, and controllers to ensure they are functional and meet your desired lighting effects.
  2. **Prepare Mounting Surfaces:** Clean surfaces thoroughly to ensure optimum adhesion. Remove dirt, oil, and contaminants. A 70% Isopropyl Alcohol (IPA) solution is recommended. For oily surfaces, use acetone. Allow surfaces to dry completely.
  3. **Measure Length:** Measure the exact length needed for each section of your installation.

2. Cutting LED Strip Lights

LED strips can be cut at designated cutting lines, usually marked by copper pads. Ensure to cut precisely along these lines to maintain proper connection points.

  • For single color strips, observe the '+' and '-' polarity marks.
  • For tunable white, RGB, and RGBW strips, look for '+' and color marks (G, R, B, WW, CW) which indicate negative polarities for each color channel.

(Image: Diagram showing positive (+) and negative (-) polarity marks on a single color LED strip for cutting would be embedded here if available.)

3. Connecting LED Strip Lights to Power Supply

3.1. Connecting a Single LED Strip to One Power Supply

Connect one end of the power supply to the DC24V LED strip and the other end to the 110V/220V home electricity. Ensure the power supply provides the correct voltage and sufficient amperage. Always match polarities (+ to + and - to -) to prevent damage.

(Image: Diagram showing a single LED strip connected to a power supply and then to 110V electricity, with DC male connectors would be embedded here if available.)

3.2. Connecting Two LED Strips to One Power Adapter

A single power adapter can power two light strips using a two-way power splitter. Ensure the total wattage of both strips does not exceed the power adapter's output (typically under 120W, meaning each strip should not exceed 50W).

(Image: Diagram illustrating two LED light strips connected to a single power adapter using a two-way power splitter would be embedded here if available.)

3.3. Connecting LED Strips with Controllers (Dimmer, Tunable White, RGB)

Controllers are placed between the LED strip and the power supply to adjust brightness or color. Ensure the controller's voltage and max amperage are compatible with the strip lights.

  • **Single Color Strips with LED Dimmer:** A dimmer adjusts brightness.
  • **Tunable White Strips with Tunable White Controller:** This controller adjusts the relative brightness of warm white and cool white LEDs to achieve various color temperatures.
  • **RGB/RGBW Strips with RGB/RGBW Controller:** These controllers manage color selection, color-changing modes, and brightness. Connect the 4-pin cable from the strip to the controller terminals, matching '+' and color channels (G, R, B).

(Image: Wiring diagram for a single color LED strip light with a dimmer and power supply would be embedded here if available.)

(Image: Wiring diagram for tunable white LED strips connected to a tunable white controller and power supply would be embedded here if available.)

(Image: Wiring diagram for an RGB LED strip connected to an RGB controller and power supply would be embedded here if available.)

3.4. Connecting LED Strips Together (Series)

LED strip lights have limits for continuous runs due to voltage drop. For longer installations, consider using LED amplifiers or multiple power supplies.

(Image: Wiring diagram for RGB controller and LED amplifiers connected to the same power supply would be embedded here if available.)

(Image: Wiring diagram for RGB controller and LED amplifiers connected to different power supplies would be embedded here if available.)

4. Connecting LED Strips to Mains Electricity

The LED strip light connects to an LED power supply, which then connects to the 110V/220V home electrical system. Power supply input terminals are marked L (live), N (neutral), and G (ground).

Image of a power supply unit showing input (L, N, G) and output (+V) terminals.
Example of a power supply unit with input (L, N, G) and output (+V) terminals. (Note: This is a general product image, a specific power supply image would be used if available.)

5. Mounting LED Strip Lights

There are two primary methods for mounting:

  1. **Peel and Stick (3M Tape):** The LED strips come with pre-applied 3M double-sided tape. Peel off a small section of the release liner film, insert the strip end into a connector (if applicable), and press the strip firmly onto the prepared surface. Apply pressure only on areas without LEDs or electrical components.
  2. **Mounting Brackets:** For outdoor applications or when hiding the strips (e.g., in ceiling coves), mounting brackets with screws can be used at appropriate intervals. This method is also suitable for surfaces that are difficult to clean thoroughly.

Operating Instructions

Once installed and connected to a compatible power supply and controller (if used), operate your COXO LED Strip Lights as follows:

  • **Power On/Off:** Use the switch on your power supply or controller to turn the lights on or off.
  • **Dimming:** If using a dimmer, adjust the dimmer control to achieve the desired brightness level.
  • **Color Temperature Adjustment (Tunable White):** For tunable white strips, use the dedicated controller to blend warm and cool white LEDs, changing the color temperature.
  • **Color Selection (RGB/RGBW):** For RGB/RGBW strips, use the controller to select specific colors, activate color-changing modes, and adjust brightness.
Illustration of dimmable LED strip light, showing brightness levels from 20% to 100% in a kitchen setting.
Illustration of dimmable LED strip light, showing brightness levels from 20% to 100% in a kitchen setting.
Color Rendering Index (CRI) comparison, showing 90+ CRI for COXO strips versus 80+ CRI for others, enhancing color vibrancy.
Color Rendering Index (CRI) comparison, showing 90+ CRI for COXO strips versus 80+ CRI for others, enhancing color vibrancy.

Maintenance

  • **Cleaning:** Gently wipe the LED strips with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
  • **Inspection:** Periodically check connections for any signs of wear or damage.
  • **Storage:** If storing the LED strips, roll them loosely and keep them in a dry, cool place away from direct sunlight.

Troubleshooting

Lights do not turn on:
Check all power connections. Ensure the power supply is plugged in and receiving power. Verify that all polarities (+/-) are correctly matched. Test the power supply and LED strip separately if possible.
Lights flicker or are dim:
Ensure the power supply is adequate for the total length of LED strip connected. Check for loose connections. If using a dimmer, ensure it is compatible and functioning correctly.
Incorrect color or no color change (RGB/RGBW strips):
Verify the RGB/RGBW controller is correctly wired to the strip, matching all color channels. Ensure the controller is functioning and its remote has working batteries.
Part of the strip is not lighting up:
This could indicate a damaged section or a faulty connection at a cut point. Inspect the affected section for physical damage or poor contact with connectors.

User Tips

  • These 3-row COB LED strips are very bright (18W/m at max power) and can serve as main lighting.
  • When dimming, ensure you use a high-quality, compatible power supply to avoid issues like 'coil whine'.
  • The product is generally of good quality and works very well for its intended purpose.

Frequently Asked Questions (FAQ)

Do you have this product in 12V?
This specific model is designed for DC24V operation. Please check product listings for 12V alternatives if needed.

Warranty and Support

For warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

You can also refer to the official user manual PDF for additional details: View User Manual (PDF)

© 2023 COXO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.