Introduction
The SMSL RAW-MDA1 is a high-performance Digital-to-Analog Converter (DAC) designed for audiophiles. It features dual ES9039Q2M decoder chips, supports MQA and MQA-CD, and offers versatile connectivity including LDAC Bluetooth 5.1. This manual provides detailed instructions for the proper setup, operation, and maintenance of your RAW-MDA1 device.
Figure 1: Front view of the SMSL RAW-MDA1 DAC.
Safety Notes
CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
To reduce the risk of electric shock, do not remove the cover (or back) of this appliance. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- This device is suitable for safe use only in areas below 2000m elevation.
- Important: To completely disconnect power, unplug the power cord from the wall outlet. The power plug is used to completely interrupt the machine's power supply.
- WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
- Hearing experts advise not to continuously play at high volume. If you experience discomfort, reduce the volume or stop using the device.
Product Features
- Supports various audio formats: DSD, WAV, APE, FLAC, AIFF, MP3, etc.
- Full MQA hardware decoding, including local playback and USB DAC.
- Multiple output options: USB, Optical, Coaxial, I2S, AES/EBU, Single-ended analog, Balanced analog, Headphone 6.35mm.
- Equipped with ES9039Q2M D/A Chip, offering ultra-low THD+N (0.00009%) and ultra-high dynamic range (126dB).
- SPDIF interface supports DOP and D2P output.
- Features a 3.5-inch large, full-view IPS LCD display.
- Newly designed UI for intuitive operation.
- Supports wired and Wi-Fi connection (2.4GHz and 5GHz).
- Supports streaming playback via DLNA and AirPlay.
- Bluetooth with APTX support, featuring both transmitting and receiving functions.
- USB connection for external hard drives, supporting up to 4TB capacity and NTFS/FAT32 formats.
- USB DAC function allows music playback from a computer.
- Built-in high-efficiency, low-noise switching mode power supply.
- Includes headphone monitoring function.
- Tempered glass top cover and precision CNC machined aluminum alloy body.
- Full-function remote control included.
Specifications
| Feature | Specification |
|---|---|
| Input Mode | micro SD / SAMBA(NAS) / OTG1 / OTG2 / USB-DAC / DLNA / AirPlay / Bluetooth |
| Output Mode | RCA / XLR / Headphone / Coaxial / Optical / AES/EBU / I2S / BT / USB audio |
| THD+N | 0.00009% |
| Dynamic Range | 126dB (A-Weighted) |
| SNR | 126dB (A-Weighted) |
| Headphone Output Power | 89mW (32Ω) / 64mW (64Ω) / 27mW (150Ω) / 14mW (300Ω) |
| Unbalanced Line Output Level | 2.1Vrms |
| Balanced Line Output Level | 5.0Vrms |
| USB Audio (DSD Support) | DSD Top support DSD256 |
| USB Audio (PCM Support) | PCM Top support PCM384kHz |
| USB Audio System Compatibility | Windows 7/8/8.1/10/11; Mac OS X; Linux |
| File System | FAT/FAT32/NTFS |
| micro SD Card Capacity | Top support 256GB |
| USB Drive/Hard Disk Capacity | Top support 4TB |
| USB Max Output Current | 2A (sum of two USB output currents) |
| USB A Max Output Current (single port) | 2A |
| Bluetooth Version | 4.0 Edition |
| Wi-Fi Specifications | 2.4G/5G |
| Network Port Size | 100Mb/s |
| System Language | Simplified Chinese, Traditional Chinese, English |
| Power Consumption | 5W |
| Standby Power | 0.5W |
| Dimensions (W x H x D) | 189*179*45mm |
Specifications are subject to change without notice.
Supported Audio Formats and Sampling Rates
| Format | Support | Level/Condition | Sampling Rate (Min-Max) | Bit Width | CUE | Remarks |
|---|---|---|---|---|---|---|
| APE | Yes | Fast | 8K-384K | 16-24bit | Yes | |
| APE | Yes | Normal | 8K-384K | 16-24bit | Yes | |
| APE | Yes | High | 8K-384K | 16-24bit | Yes | |
| APE | Yes | Extra high | 8K-96K | 16-24bit | 176/192K not supported | |
| APE | No | Insane | 8K | |||
| WAV | Yes | 8K-384K | 16-32bit | Yes | DIS encoding not supported | |
| WMA | Yes | 8K-96K | 16-24bit | |||
| WMALossless | Yes | 8K-96K | 16-24bit | |||
| Flac | Yes | 8K-384K | 16-24bit | Yes | ||
| DSF | Yes | 2.8M-11.2M | 1bit | Yes | ||
| DFF | Yes | 2.8M-11.2M | 1bit | |||
| ISO DSD | No | |||||
| ISO DST | No | |||||
| Aiff | Yes | 8K-384K | 16-32bit | |||
| M4A | Yes | 8K-384K | 16-24bit | |||
| Mp2 | Yes | 8K-48K | 16bit | |||
| Mp3 | Yes | 8K-48K | 16bit | Yes | ||
| AAC | Yes | 8K-48K | 16bit | Yes | ||
| OGG | Yes | 8K-48K | 16bit |
Note: The mark here is the rate of sampling, not a file rate.
APE: 32-192kHz's Insane file does not support. 176.4kHz, 192kHz's Extra high file does not support.
ISO8 files do not support. ALL 64k files do not support.
Setup
Package Contents
Please check that all items are present in the package:
- SMSL DP5 SE Unit (1)
- Remote Control (1)
- Power Cord (1)
- USB Data Cable (1)
- Antenna (1)
- Instructions (1)
- Warranty Card (1)
- Packing Box (1)
Connecting Your Equipment
Ensure the device is powered off before making any connections.
Rear Panel Overview
Figure 2: Rear panel of the RAW-MDA1 DAC.
- Display screen
- Power button: Long press ON/OFF, short press to turn off display.
- "Previous" button: Short press for previous song, long press to rewind.
- Play/Pause button
- "Next" button: Short press for next song, long press for fast forward.
- Return/Exit button
- Remote IR window
- Unbalanced headphone 6.3mm interface
- Knob (Multifunction)
- 2.4G/5G dual frequency antenna
- AES/EBU output
- Line output
- Balanced output
- Power AC input
- Network interface
- USB 2.0 interface
- USB Audio input
- Optical output
- Coaxial output
- I2S output interface
- Micro SD card slot
Power Connection
Connect the provided power cord to the AC IN port on the rear panel of the RAW-MDA1 and then to a grounded wall outlet. Using a grounded outlet helps ensure safety and reduce noise.
Figure 3: Power connection diagram. Please use a power outlet with a good grounding wire.
The power state of DP5 SE has memory:
- If you directly unplug the power cord without using the shutdown button, the unit will directly boot the next time it's plugged in.
- If you hold the knob/remote control power off, the unit will not directly start the next time it's plugged in.
Audio Output Connections
The RAW-MDA1 offers various output options to connect to your amplifier, headphone amplifier, or active speakers.
Figure 4: Connecting headphones and active speakers.
Network and USB Connections
The RAW-MDA1 supports network storage (NAS) and PC connections for media playback.
Figure 5: Network connection diagram, including router, NAS, and PC.
USB A Port Usage:
- When used as a USB hard disk input, the upper interface is OTG_1 and the lower interface is OTG_2. Note: The sum of the two USB output currents does not exceed 2A.
- One of the USB A ports can be used as a USB output. When a USB DAC is connected, the display will show "Audio Device Connection". Digital signals will be output from this USB interface, and other outputs of the DP5 SE will be silent. When unplugged, "Audio Device Disconnect" will be displayed, and the original output will be restored. Note: The USB DAC may not connect successfully due to USB matching problems.
Figure 6: USB A port connection for OTG and USB DAC.
Operation
Remote Control
The included remote control provides full functionality for operating the RAW-MDA1. The effective operating range is approximately 8 meters (26 feet) within a 30-degree angle.
Figure 7: Remote control layout and operating range.
Remote Control Functions:
- ON/OFF: Power on/off the unit.
- UP/DOWN: Navigate menus or adjust settings.
- Play/Pause/OK: Play/pause music, confirm selections, long press to open operation menu.
- Next/Previous: Skip tracks.
- Function button: Long press to return to the "Playing" interface from any screen.
- Mute: Mute/unmute audio.
- Return/Exit: Go back to the previous screen, long press to return to the home page.
- VOL UP/DOWN: Adjust volume.
User Interface Navigation
Main Interface
The main interface provides quick access to key functions and settings.
Figure 8: Main interface of the RAW-MDA1.
Multifunction Knob Operation:
- In the playback interface, short press the middle button to play/pause. Long press to enter the playback menu (My favorites, add to song list, delete, list play mode). Short press under the menu to confirm.
- Turn the knob left/right to adjust volume up/down.
- The Play/Pause button (on the unit) functions as click to play/pause; double click to replay the current track.
Playback Interface
This screen displays information about the currently playing track.
Figure 9: Music playback interface.
Music Library
Access and manage your music files through the music library menu.
Figure 10: Music library menu.
Music Library Menu Contents: Recent play, Open all, My favorites, Album, Genre, Artist, Song sheet.
Note: The maximum number of songs the DP5 SE can scan is 30,000. Exceeding this limit will prevent further scanning.
File Browsing Interface
Browse files from various sources like micro SD card, LAN, OTG, USB-DAC, DLNA, AirPlay, and Bluetooth.
Figure 11: File browsing interface.
Multifunction Knob Operation: Long press to delete selected files.
Playback Settings
Customize your playback experience. These settings are primarily for micro SD card playback.
- Resume Mode:
- "Turn off": Next time the unit is powered on, it will not play the previous repertoire.
- "Repertoire": Remembers the track before power off.
- "Position": Remembers the position within the track before power off.
- Gapless Playback: Song switching with the same sampling rate does not stop.
- Play Mode: List play, single loop, random play, list cycle.
- Folder Skip: Allows skipping songs to a different file within a folder.
System Settings
Configure various system parameters of the RAW-MDA1.
Figure 12: System settings menu.
- Update Music Mode: Manual or Auto. (Only valid for micro SD card).
- Update Music: Scans memory devices for songs.
- Output Mode: Headphone output or Line output. (Digital output is not affected).
- I2S Inverting: Choose or not choose.
- Fixed Sample Rate Output: On or Off. Options: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz.
- USB B Mode:
- USB Mode: Connects to a computer to access/modify micro SD card data. Eject before disconnecting.
- DAC Mode: Unit acts as a USB Audio input, functioning as a normal USB decoding device.
- Backlight Brightness: 5 levels of adjustment.
- Backlight Timer: 15s, 30s, 45s, 3min, 5min, 10min, Never.
- Language: Simplified Chinese, Traditional Chinese, English.
- About Device: Displays Model, External memory, Available capacity, Bluetooth address, Firmware version.
- Restore Factory Setting: Resets all options to factory defaults.
- System Upgrade: Download firmware to micro SD card, insert into unit, and click system upgrade.
Network Settings
Configure Bluetooth and Wi-Fi connections for streaming and remote control.
Figure 13: Network settings menu.
- Bluetooth:
- HiBy Link: Enables mobile devices with HiBy player to browse the unit's storage and act as a Bluetooth remote. (Note: When using Bluetooth for audio input, turn off HiBy Link on the DP5 SE).
- High Sound Quality: Improves Bluetooth audio transmission using advanced algorithms.
- Bluetooth Scanning: Scans for nearby Bluetooth devices. Select a connected device and long press the "Multi-Function Middle Button" to delete pairing.
- Wi-Fi:
- Select "Searching WiFi" to scan for nearby wireless LANs.
- Use the remote control or multifunction knob to enter the password on the virtual keyboard.
- SAMBA (NAS) LAN Playback: After Wi-Fi setup, enter the "File Browser" menu, select the LAN, and choose a folder to play songs. (If the folder is password protected, cancel it first). Note: Switching networks requires re-scanning servers. Unstable Wi-Fi may cause interruptions.
- DLNA: Connects to the network. Use a mobile device with a DLNA-compatible app (e.g., Bubble UPnP) to play songs and push them to the "SMSL DP5 SE". Note: Only operates on the same network. Unstable networks may interrupt DLNA playback. If your Wi-Fi has a 5G band, choose 5G for less interference.
- AirPlay: Connect your iOS device (iPhone, iPod, iTouch, iPad, or iTunes) to the same local area network. The DP5 SE will appear in the AirPlay device list. Select it to stream audio. Note: Wireless connections may be lost or interrupted due to distance or radio interference. Some Android devices may not be fully compatible with Bluetooth.
MQA Playback
MQA (Master Quality Authenticated) is a British technology that delivers high-resolution audio. The DP5 SE supports MQA technology, allowing it to receive and decode MQA audio, providing master-quality sound. For more information, visit www.mqa.co.uk/how-it-works.
- The DP5 SE's MQA playback does not require additional software. You can use players like foobar2000 or Audirvana that support ASIO or WASAPI audio output. For optimal MQA audio output, set your computer's volume to maximum.
- When playing an MQA file, the display shows the original master recording's sampling rate.
- MQA files have two formats: 'MQA' and 'MQA Studio'. 'MQA' or 'MQA Studio' indicates that the product is decoding and playing an MQA stream or file, and denotes provenance to ensure the sound is identical to the source material. 'MQA Studio' indicates it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.
Maintenance
- Keep the device clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Ensure proper ventilation around the device to prevent overheating.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- When not in use for extended periods, disconnect the power cable.
Troubleshooting
If you encounter issues with your RAW-MDA1, please refer to the following common solutions:
- No Power: Ensure the power cable is securely connected to both the device and a working wall outlet. Check if the power button has been pressed correctly.
- No Sound Output:
- Verify that the correct input source is selected on the RAW-MDA1.
- Check all audio cable connections to your amplifier, headphones, or active speakers.
- Ensure the volume is not muted or set too low on both the RAW-MDA1 and your connected audio equipment.
- If using USB DAC, ensure the correct drivers are installed on your computer and the RAW-MDA1 is in DAC mode.
- Bluetooth Connection Issues:
- Ensure Bluetooth is enabled on both the RAW-MDA1 and your source device.
- Try unpairing and re-pairing the devices.
- Reduce the distance between the RAW-MDA1 and your source device, and ensure there are no obstructions.
- Turn off HiBy Link on the DP5 SE if using Bluetooth for audio input.
- Wi-Fi/Network Playback Interruptions:
- Ensure your Wi-Fi network is stable and strong.
- If using DLNA, ensure both devices are on the same network.
- Consider using the 5GHz Wi-Fi band if available, as it may offer more stability and less interference.
- Re-scan network servers if you have switched networks.
- USB Hard Drive Not Recognized:
- Ensure the hard drive is formatted to NTFS or FAT32.
- Check that the total current draw from both USB A ports does not exceed 2A.
- Try connecting the hard drive to a different USB A port.
If the problem persists, please consult the official user manual PDF or contact customer support.
User Tips
- For optimal MQA playback from a computer, ensure your computer's volume is set to maximum to allow the DAC to perform its decoding fully.
- When using the multifunction knob, a short press confirms selections in menus, while a long press often accesses deeper settings or returns to the playback screen.
- If experiencing issues with wireless connections (Bluetooth, Wi-Fi, DLNA, AirPlay), try to minimize the distance between the RAW-MDA1 and your source device and reduce potential interference from other electronic devices.
- Regularly check the official SMSL website (http://www.smsl-audio.com/) for firmware and driver updates to ensure optimal performance and compatibility.
Warranty Terms
Foshan Shuangmusanlin Technology Co., Ltd (S.M.S.L) promises to offer good-quality products. The warranty terms are as follows:
1. Term of Service
If the product malfunctions under normal use within 7 days of purchase, customers may choose to return, replace, or repair the product (only if the product does not affect secondary sales). Free repair is provided for one year under normal use.
2. Date of Purchase
The purchase date is determined by the invoice or receipt issued by the seller. For online purchases, a screenshot of the transaction can serve as proof.
3. Voided Warranty Conditions
The warranty will be void if the unit is damaged due to inappropriate usage, including but not limited to:
- All damages caused by inappropriate use, including use in non-normal working environments or not following instructions.
- Dismantling, refitting, or repairing by the user without authorization.
- Causing damage by using non-designated or unaccredited fittings.
- Inability to provide credible proof of purchase.
- Products not from S.M.S.L (e.g., counterfeits).
- Damage to the QC or warranty stickers on the unit.
4. Repair Method
Repairs are conducted by sending the product to the service center. These terms apply to mainland China. For other regions, please refer to the regulations of your local sales agent and national laws.
5. Contact for Service
Contact your S.M.S.L Audio reseller for returns or replacements.
Additional Resources
A detailed user manual in PDF format is available for download. This document provides comprehensive information and diagrams for advanced users.
You can view the PDF user manual here: SMSL RAW-MDA1 User Manual (PDF)
For firmware and driver downloads, please visit the official SMSL website: http://www.smsl-audio.com/