1. Introduction
Thank you for choosing the KEVANLY Universal 24V LED Side Marker Light. This product is designed to enhance visibility and safety for a wide range of 24V DC vehicles, including trucks, RVs, trailers, lorries, pickups, and boats. Featuring high-power LED diodes, robust construction, and a waterproof design, this light serves as an effective clearance, side marker, or identification light.
2. Safety Information
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electrical shock, fire, or damage to the product or vehicle.
- Ensure the vehicle's power supply is disconnected before attempting any installation or wiring.
- Verify that the vehicle's electrical system is 24V DC. Connecting to an incorrect voltage may damage the light.
- All wiring should be performed by a qualified professional if you are unsure.
- Securely mount the light to prevent it from becoming loose during vehicle operation.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and create safety hazards.
- Keep the product away from flammable materials during operation.
3. Product Features
- Universal Compatibility: Works with any 24V DC system, ideal for trucks, RVs, trailers, lorries, pickups, and boats.
- Multi-functional: Can be used as clearance, side marker, identification, or tail lights.
- High Brightness: Each lamp contains 4 high-power LED Diodes for superior lighting output.
- Durable Construction: Features a full body 6063 aluminum material for excellent heat dissipation and an ABS shell.
- Weatherproof: IP67 waterproof rating ensures resistance against sand, water, dirt, snow, and dust.
- Long Lifespan: Designed for over 60,000 hours of operation.
- Wide Operating Temperature: Functions reliably from -40°C to +80°C.
- Built-in Load Resistor: Provides brighter light and eliminates dark spots.
4. Specifications
| Attribute | Value |
|---|---|
| Voltage | DC 24V |
| Emitting Colors | Red, Amber (Yellow), White |
| LED Quantity | 4 high power LED Diodes per lamp |
| Material | 6063 Aluminum body, ABS shell |
| Waterproof Rating | IP67 |
| Lifespan | Over 60,000 hours |
| Operating Temperature | -40°C to +80°C |
| Dimensions (L x H) | 115mm x 74mm |
| Item Type | Clearance Lights |
5. Installation
The KEVANLY LED Side Marker Light is designed for screw-fixed mounting and simple wiring. Follow these steps for proper installation:
- Prepare the Mounting Surface: Choose a flat, secure location on your vehicle for mounting. Ensure the surface is clean and free from debris.
- Mark Drilling Points: Use the light as a template to mark the positions for the mounting screws.
- Drill Pilot Holes: Carefully drill pilot holes at the marked positions.
- Connect Wiring: The light comes with connecting wires. Connect the positive wire of the light to the appropriate 24V DC positive power source on your vehicle (e.g., clearance light circuit, turn signal circuit, etc.), and the negative wire to a reliable ground point. Ensure all connections are secure and insulated to prevent short circuits.
- Mount the Light: Align the light with the drilled holes and secure it firmly using appropriate screws. The light features a sealed design for environmental protection.
- Test Functionality: Once installed, reconnect the vehicle's power and test the light to ensure it functions correctly.
6. Operation
The KEVANLY LED Side Marker Light operates automatically when connected to the appropriate 24V DC power source in your vehicle. It will illuminate when the connected circuit (e.g., vehicle lights, ignition) is activated.
- Power On: The light will turn on when the vehicle's electrical system supplies 24V DC to the connected circuit.
- Power Off: The light will turn off when the power supply to the connected circuit is interrupted.
7. Maintenance
- Cleaning: Regularly wipe the surface of the light with a soft, damp cloth to remove dirt and debris. Avoid using abrasive cleaners or solvents that could damage the lens or housing.
- Inspection: Periodically check the mounting screws and wiring connections to ensure they remain secure and free from corrosion.
- Damage: If the light housing or lens becomes damaged, replace the unit to maintain its waterproof integrity and light output.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not illuminate | No power supply, loose wiring, incorrect voltage, or damaged unit. | Check vehicle's power supply (24V DC), inspect all wiring connections, ensure proper grounding, and replace if damaged. |
| Light flickers or is dim | Poor electrical connection, insufficient voltage, or internal fault. | Verify stable 24V DC power, tighten connections, and ensure proper grounding. |
9. User Tips
- Consider installing multiple lights for enhanced visibility on larger vehicles or trailers.
- Regularly check the lights during pre-trip inspections to ensure they are clean and fully functional.
10. Warranty and Support
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.
11. Additional Resources
A PDF document titled "User manual (PDF)" is available at this link. Please note that this PDF pertains to a different product, specifically "Touch-Activated Ambient Lighting for Automotive Interiors," and its instructions are not applicable to the KEVANLY Universal 24V LED Side Marker Light.