JOHNCOO Telescopic Fishing Rod Holder

Contents

JOHNCOO Telescopic Fishing Rod Holder User Manual

Model: Telescopic Fishing Rod Holder

1. Introduction

Thank you for purchasing the JOHNCOO Fishing Rod Holder. This user manual will guide you through the assembly, usage, and maintenance of your new product. Please read through this manual carefully to ensure safe and effective use.

2. Safety Precautions

  • Always use the rod holder for its intended purpose.
  • Ensure all parts are securely attached before use.
  • Avoid overloading the rod holder beyond its maximum capacity.
  • Keep children away from the rod holder when in use.
  • Inspect the rod holder regularly for any signs of wear or damage.

3. Product Overview

The JOHNCOO Telescopic Fishing Rod Holder is designed for convenience and stability, featuring a robust aluminum alloy construction and versatile adjustment options.

Key Components:

  • Foldable Front Fork: Allows for angle adjustment and compact storage. Made of soft rubber material.
  • Rear Hanging: Also made of soft rubber material, designed for secure rod placement.
  • Telescopic Switch Buckle: Controls the length of the pole for adjustable height and positioning.
  • Holder for Bait Box: Integrated design to pair with hanging bait boxes for easy access.
  • Fishing Bucket Clamps: Securely attaches the rod holder to a fishing bucket.
  • Barrel Base: Provides a stable foundation for the rod holder.
Diagram of Multifunctional Telescopic Pole Holder with labeled parts
Figure 1: Multifunctional Telescopic Pole Holder Components

4. Setup (Assembly Instructions)

  1. Unpack all components and ensure you have a complete set.
  2. Adjust the fishing rod head angle to the desired position using the rotating screws.
  3. Attach the rod holder to your fishing bucket as follows:
    • Loosen the two mounting screws on the fishing bucket clamps.
    • Spread the clamps slightly and position them to grip the rim of your fishing bucket.
    • Lower the barrel base (Part A) to the bottom of the bucket.
    • Push the upper clamp (Part B) down to the rim of the bucket and tighten the screws to secure.
Assembly diagram showing how to attach the rod holder to a fishing bucket
Figure 2: Assembly Steps for Attaching to a Bucket
Main product image, showing the rod holder attached to a fishing bucket with a rod in place
Figure 3: Rod Holder Attached to a Fishing Bucket

5. Operating Instructions

5.1. Adjusting Angle and Position

The rod holder features easy angle adjustment with rotating screws. Loosen the screws, set the desired angle for the front and rear forks, and then tighten the screws to secure the position. This allows you to adapt to various fishing environments.

Diagram illustrating the angle adjustment mechanism with rotating screws
Figure 4: Angle Adjustment Mechanism

5.2. Telescopic Height Adjustment

The pole frame is telescopic, allowing for arbitrary lifting and positioning. Use the telescopic switch buckle to extend or retract the pole to your preferred height. Ensure the buckle is securely fastened after adjustment to maintain stability.

Diagram showing the telescopic pole frame lifting positioning
Figure 5: Telescopic Pole Frame Adjustment

5.3. Using the Bait Box Holder

The rod holder is designed to be paired with hanging bait boxes. Attach your compatible bait box to the designated holder for convenient access to your bait while fishing.

Image of a person using the fishing rod holder, attached to a bucket, with a fishing rod and bait box
Figure 6: Rod Holder in Use with Bait Box

6. Maintenance and Cleaning

  • Regularly clean the rod holder with warm water and mild soap.
  • Ensure no oily residue or slippery surfaces are left after cleaning.
  • Avoid using chemical-based products as they may void the warranty.

7. Troubleshooting

Problem Possible Cause Solution
Rod holder feels unstable. Clamps not tightened sufficiently; telescopic pole not locked. Ensure fishing bucket clamps are securely tightened. Verify the telescopic switch buckle is fully engaged and locked.
Difficulty adjusting angle or height. Screws or buckles are too tight or stiff. Loosen adjustment screws before attempting to change angle. For telescopic pole, ensure the buckle is released. Apply a small amount of lubricant if stiffness persists.
Rod slips from holder. Incorrect angle; excessive force on rod; worn rubber material. Adjust the angle for optimal rod support. Avoid sudden jerks on the rod. Inspect soft rubber materials for wear and replace if necessary.

8. Specifications

Feature Detail
Type Rod Holder
Material Thickened Aluminum Alloy Pipe, Soft Rubber (Forks)
Magnet Fishing Compatible No
Origin Mainland China
Package Length 43 cm
Package Width 8 cm
Package Height 7 cm
Package Weight 0.748 kg
Close-up of the thickened aluminum alloy pipe material
Figure 7: Thickened Aluminum Alloy Pipe Detail

9. User Tips

  • The rod holder provides sturdy support, even with slight movement, making it comfortable and reliable for use.
  • Take full advantage of the height adjustment and the ability to change the stand's direction independently from the main body for optimal positioning.
  • Exercise care when handling the screws that secure the lower part during assembly and adjustment to ensure longevity.
  • The product offers excellent craftsmanship and good value for money.

10. Warranty and Support

10.1. Warranty Information

Our Fishing Rod Holder is warranted against manufacturing defects in workmanship and materials for a specified period from the date of purchase. Parts repaired or replaced under this warranty will be covered for the remainder of the warranty period. Please retain your proof of purchase for warranty claims.

For detailed warranty terms and conditions, please refer to the official user manual PDF: View User Manual (PDF)

10.2. Customer Support

By following these instructions, you can ensure safe and effective use of your Fishing Rod Holder. If you have any questions or need further assistance, please contact our customer service team through the retailer or manufacturer's official channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.