Introduction
Thank you for choosing the ZUOYA LS02 Mechanical Keyboard Kit. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard. The LS02 features a hot-swappable design, three connection methods (Bluetooth, 2.4G Wireless, USB Type-C), RGB backlighting, and a gasket structure for an enhanced typing experience.
For additional information and diagrams, please refer to the official user manual PDF: ZUOYA LS02 User Manual (PDF)
Product Structure
The ZUOYA LS02 features a sophisticated internal structure designed for durability and performance. Understanding its components can assist with maintenance and customization.

Exploded view showing the keyboard's internal layers: Upper cover, positioning plate, EVA cotton, IXPE switch pad, circuit board, sponge, and bottom shell.

Top view of the ZUOYA LS02 barebone kit, showcasing the hot-swappable switch sockets.
Setup and Connection
The ZUOYA LS02 supports three connection methods: USB Wired, 2.4G Wireless, and Bluetooth (with 3 channels). Use the toggle switch on the bottom of the keyboard to select your desired mode.

Bottom and side view of the ZUOYA LS02, indicating the location of the connection mode switch.
1. Wired Mode Installation
- Set the toggle switch on the keyboard to the 'OFF' position.
- Connect the Type-C cable to the keyboard and the USB-A end to your computer.
- The top-left indicator light will show red for 5 seconds, confirming wired mode.
2. Bluetooth Mode Installation
- Set the toggle switch on the keyboard to the 'BT' position. The top-left indicator light will show blue.
- To enter pairing mode, press and hold the
Fn+1,Fn+2, orFn+3key combination for 3 seconds (each corresponds to a different Bluetooth channel). The top-left independent light bar will flash rapidly. - On your computer or device, search for Bluetooth devices and select 'ZUOYA LS02' to connect.
- Once connected, the top-left indicator light will transition from red to a blue RGB flow, indicating a successful connection.
- To clear Bluetooth pairing records, long-press
Fn+0for 2 seconds.
3. 2.4G Wireless Mode Installation
- Set the toggle switch on the keyboard to the '2.4G' position. The top-left indicator light will show green.
- Insert the 2.4G receiver into an available USB port on your computer.
- To enter pairing mode, press and hold the
Fn+4key combination for 3 seconds. The top-left independent light bar will flash rapidly for 20 seconds. - The indicator light will change from red to a green RGB flow, confirming a successful connection.
Operating Instructions
Keyboard Functions (Combined Keys)
Utilize the Fn key in combination with other keys for various functions:
Fn+ESC: Reset to factory settings.Fn+F1-F12: Multimedia functions (e.g., My Computer, Search, Calculator, Media Player, Previous Track, Next Track, Play/Pause, Stop, Mute, Volume Down, Volume Up, Email).Fn+Win: Lock/Unlock the Windows key.Fn+Z: Switch to Mac system layout.Fn+X: Switch to Windows system layout.Fn+Left Arrow: Switch main key area LED direction to the left.Fn+Right Arrow: Switch main key area LED direction to the right.Fn+Up Arrow: Increase main key area LED brightness.Fn+Down Arrow: Decrease main key area LED brightness.Fn++: Increase main key area LED speed.Fn+-: Decrease main key area LED speed.
Multimedia Knob Functions
The multi-function knob offers versatile control:
- Default Mode (Volume Control): Turn clockwise to increase volume, counter-clockwise to decrease volume. Press the knob to mute/unmute.
- Backlight Adjustment Mode: Turn clockwise to cycle through backlight effects forward, counter-clockwise to cycle backward. Press the knob to turn the backlight on/off.
- Switching Modes: Long-press the knob for 3 seconds to switch between Volume Control and Backlight Adjustment modes. The top-left red light will flash once to confirm the switch.
RGB Backlight Effects
The keyboard features dynamic RGB backlighting with 18 adjustable effects. The knob can be used to cycle through these effects. The keyboard retains the last selected effect even after powering off.

The ZUOYA LS02 keyboard showcasing its vibrant RGB backlighting with multiple lighting modes and colors.
Available effects include: Off, Always On, Breathing, Snake Run, Neon Gradient, Snow Trace, Flowing Horse, Surging Waves, Starry Sky, Galloping Dust, Flowing Wave, Great Peng Spreading Wings, Walking in the Rain, Peak Turns, Water Ripple.
Indicator Light Bar (Bottom Right)
The bottom-right light bar provides visual feedback for various keyboard states:
- On/Off: Press
Fn+Left Arrowto toggle the light bar. - Connection Status: Red for pairing, blue for successful Bluetooth connection, green for successful 2.4G connection.
- Caps Lock: White light for 5 seconds when Caps Lock is active.
- Key Lock: Red light for 5 seconds when all keys are locked.
- Win Key Lock: White light for 5 seconds when the Windows key is locked.
- Low Voltage Alarm: Red light flashes continuously. The keyboard will eventually shut down if the battery is too low.
- Sleep Mode: After 6 minutes of inactivity, the main key area LED and bottom-right light bar will turn off. Press any key to wake up the keyboard.
Charging Instructions
The ZUOYA LS02 is equipped with a built-in 4000mAh rechargeable lithium battery.

Diagram illustrating the 4000mAh rechargeable battery capacity.
The charging indicator is the RGB light located under the spacebar.
- Wired Mode Charging: The indicator light will be solid red while charging and turn solid green when fully charged.
- Wireless Mode Charging: The indicator light will show green for 5 seconds, then resume the current RGB backlight mode.
Maintenance
To ensure the longevity and optimal performance of your ZUOYA LS02 keyboard, follow these maintenance guidelines:
- Cleaning: Regularly clean the keyboard with a soft, dry cloth. For deeper cleaning, use compressed air to remove dust and debris from between keycaps. Avoid using harsh chemicals or abrasive materials.
- Spills: In case of liquid spills, immediately disconnect the keyboard from power and turn it off. Gently blot away excess liquid and allow the keyboard to dry completely before reconnecting.
- Switch Replacement: The hot-swappable design allows for easy replacement of switches. Use the provided switch puller to carefully remove switches. Ensure new switches are aligned correctly before pressing them into place. The keyboard supports both 3-pin and 5-pin mechanical switches.
- Storage: Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your ZUOYA LS02 keyboard, please refer to the following common solutions:
- Keyboard Not Responding:
- Ensure the keyboard is properly connected (wired, 2.4G receiver, or Bluetooth paired).
- Check the battery level. If low, connect the keyboard to a power source for charging.
- Try switching between connection modes (OFF, BT, 2.4G) to reset the connection.
- Wireless Connectivity Issues:
- For 2.4G, ensure the receiver is securely plugged into a USB port and try re-pairing (
Fn+4for 3 seconds). - For Bluetooth, ensure the keyboard is in BT mode and try re-pairing to a different channel (
Fn+1/2/3for 3 seconds). Clear existing Bluetooth pairing records (long-pressFn+0for 2 seconds) if necessary. - Ensure there is no significant interference from other wireless devices.
- For 2.4G, ensure the receiver is securely plugged into a USB port and try re-pairing (
- Backlight Not Working or Incorrect:
- Check if the backlight is turned off via the multimedia knob.
- Adjust brightness and effects using the
Fnkey combinations or the multimedia knob.
- Ghosting or Input Errors:
- Ensure the keyboard firmware is up to date (check the manufacturer's website for updates).
- Try connecting the keyboard via wired mode to rule out wireless interference.
- Low Voltage Alarm: If the bottom-right indicator light flashes red continuously, the battery is low. Connect the keyboard to a power source for charging immediately.
Specifications
| Feature | Detail |
|---|---|
| Model | LS02 |
| Keyboard Standard | 82 Key |
| Connection Type | Bluetooth, 2.4G Wireless, USB Type-C (Wired) |
| Operation Style | Mechanical |
| Switches Hot Swap | Yes (Supports 3/5 pin switches) |
| Backlight Type | MULTICOLOR RGB |
| Battery Capacity | 4000mAh Rechargeable Lithium Battery |
| Dimensions (L x W x H) | 330 x 150 x 40mm ±5mm |
| Product Weight | Approx. 0.827 kg |
| Wired Working Voltage | 5.0V±0.25V |
| Wired Working Current | <300mA |
| Wireless Working Voltage | 3.3-4.2V |
| Wireless Working Current | <350mA |
| Application | Desktop, Laptop, Tablet |
| Language | English |
| Package Contents | Keyboard Kit, USB Type-C Cable, 2.4G Receiver, User Manual |

Icons highlighting key features: Three connection methods, volume knob, game chip, 3/5 pin switch support, 84-key layout, multilayer noise reduction, Mac & Windows support, independent stabilizer, large capacity battery, macro programming.
User Tips
- Stabilizers Included: The ZUOYA LS02 comes with independent stabilizers pre-installed, ensuring a smooth typing experience for larger keys.
- Switch Compatibility: This keyboard is designed to be compatible with both 3-pin and 5-pin mechanical switches, offering broad customization options.
- Macro Programming: The keyboard supports macro programming for advanced users. While no dedicated software is explicitly mentioned, macro functions are typically configured via key combinations or generic keyboard software.
- Addressing Ghosting: If you experience ghosting (unintended key presses), ensure your keyboard's firmware is up to date. In wireless modes, try to minimize interference from other electronic devices. Using the wired connection can help determine if the issue is wireless-related.
Warranty and Support
The ZUOYA LS02 Mechanical Keyboard Kit comes with a 12-month quality assurance warranty from the date of purchase. This warranty covers repair, replacement, or return services in accordance with microcomputer commodity regulations.
Warranty Exclusions:
- Damage occurring beyond the valid service period.
- Malfunctions or damage resulting from improper use, maintenance, or storage.
- Repairs performed by unauthorized service centers.
- Damage caused by force majeure (e.g., natural disasters).
- Damage due to human factors (e.g., operational errors, physical impact, incorrect voltage input).
- Issues not related to the product's design, technology, manufacturing, or inherent quality.
For technical support or warranty claims, please contact your retailer or the ZUOYA official support channel.
Frequently Asked Questions (FAQ)
- Q: Does the keyboard come with stabilizers?
- A: Yes, the ZUOYA LS02 features independent stabilizers for a consistent typing feel on larger keys.
- Q: Are 2-pin switches compatible with this keyboard?
- A: The keyboard supports both 3-pin and 5-pin mechanical switches, offering flexibility for customization.
- Q: Is there any dedicated software for this keyboard?
- A: The manual indicates support for macro programming, but does not specify dedicated software. Functions are primarily controlled via key combinations.