GIRIER Zigbee switch module

Contents

GIRIER Tuya ZigBee 3.0 Smart Switch Module User Manual

Smart Home DIY Light Breaker Works with Alexa Google Home

Product Overview

The GIRIER Tuya ZigBee 3.0 Smart Switch Module is designed for smart home lighting control. It supports 2-way control and does not require a neutral wire for installation, making it suitable for various setups. This module is compatible with Zigbee 3.0 gateways and can be controlled via the Tuya Smart App, Amazon Alexa, and Google Home.

GIRIER Zigbee Switch Modules (1CH, 2CH, 3CH, 4CH)
GIRIER Zigbee Switch Modules: Available in 1-channel, 2-channel, 3-channel, and 4-channel versions.
GIRIER Zigbee Switch Module Features
Key features include mini body design, easy installation, voice control, family sharing, app control, and timing functions.

Technical Specifications

PropertyValue
Product TypeZigbee Switch Module-L
VoltageAC200-240V 50/60Hz
Max. Load (1CH)10-100W
Max. Load (2CH)2x(10-100W)
Max. Load (3CH)3x(10-100W)
Max. Load (4CH)4x(10-100W)
Operation Frequency2.405GHz-2.480GHz IEEE802.15.4
Operation Temperature-10°C ~ +40°C
ProtocolZigbee 3.0
Operation Range<100m
Dimensions (WxDxH)39.2x39.2x18 mm
IP RatingIP20
Warranty2 years
CertificatesCE, RoHS
Communication MethodZigbee
State of AssemblyReady-to-Go
CompatibilityAll Compatible

Setup and Installation

Important Warnings:

  • Installation must be carried out by a qualified electrician in accordance with local regulations.
  • Keep the device out of reach of children.
  • Keep the device away from water, damp, or hot environments.
  • Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, leading to abnormal operation.
  • Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
  • Do NOT attempt to disassemble, repair, or modify the device.
  • Do not connect the neutral line. Otherwise, it will be permanently damaged.

System Requirements:

  • WIFI Router
  • ZigBee gateway (Tuya Zigbee Hub required for app and voice control)
  • iPhone, iPad (iOS 7.0 or higher) or Android 4.0 or higher

Wiring Instructions and Diagrams:

  1. Turn off the power supply before carrying out any electrical installation work.
  2. Connect wires according to the wiring diagram provided for your specific module type.
  3. Insert the module into the junction box.
  4. Turn on the power supply and follow switch module configuration instructions.
  5. If the light flashes after turning off, please connect the accessories (capacitor).
Wiring Diagram for 1CH Zigbee Switch Module-L
Wiring Diagram for 1CH Zigbee Switch Module-L, showing single control and double switch configurations. Technical specifications are also included.
Wiring Diagram for 2CH Zigbee Switch Module-L
Wiring Diagram for 2CH Zigbee Switch Module-L, illustrating single control and double switch setups. Technical specifications are also included.
Wiring Diagram for 3CH Zigbee Switch Module-L
Wiring Diagram for 3CH Zigbee Switch Module-L, showing single control and double switch configurations. Technical specifications are also included.
Wiring Diagram for 4CH Zigbee Switch Module-L
Wiring Diagram for 4CH Zigbee Switch Module-L, detailing rocker type switch and push switch configurations. Technical specifications are also included. Note: There is no 'Switch Type' option in the app; follow the wiring diagram to change the switch type.

App Pairing:

To pair the device with the Tuya Smart App, ensure you have a Zigbee Gateway installed and connected to your WIFI network. The product should be within the range of your Zigbee Gateway Network.

  1. Download the Tuya Smart App by scanning the QR code or searching 'Tuya Smart' in your App Store or Google Play.
  2. Log in or register your account.
  3. Open the control panel of the ZigBee gateway on the App.
  4. After wiring the switch module, press the reset key for about 5 seconds OR turn on/off the traditional switch 5 times until the indicator light inside the module flashes quickly for pairing.
  5. Click '+' (Add sub-device) to select the suitable product gateway and follow the on-screen instructions for pairing.
  6. The connection process may take 10-120 seconds depending on your network condition.
  7. Once successfully added, you can control the device via your mobile phone.
Video demonstrating app pairing and voice control. If the light flickers, install a capacitor close to the L1 bulb. A capacitor is generally not needed if the L1 LED bulb is over 10W. A Tuya Zigbee Hub is required for app and voice control.

Operating Instructions

Function Introduction:

  • Both the adjustment on the App and the physical switch can overwrite each other; the last adjustment remains in memory.
  • The App control is synchronized with the manual switch.
  • Manual switching interval should be greater than 0.3 seconds.
  • You can select the switch type on the APP (Please use this function in wired gateway).

Voice Control:

Once paired with your Zigbee Hub and integrated with Amazon Alexa or Google Home, you can control your lights using voice commands. For example, say "Alexa, turn on bedroom light" or "Hey Google, turn off living room light."

Maintenance

Resetting the Device:

If you need to reset the device, follow these steps:

  1. Switch on/off the traditional switch for 5 times until the indicator light flashes.
  2. Alternatively, press the reset key on the module for about 5 seconds until the indicator light flashes.

Changing Wi-Fi Network or Password:

If you change your Wi-Fi network or password, you will need to re-connect your Zigbee switch module to the new Wi-Fi network. Follow the app pairing instructions (see 'App Pairing' section) to re-establish the connection.

Troubleshooting (FAQ)

Q1: What should I do if I can't configure the switch module?

  • Check whether the device is powered on.
  • Make sure the Zigbee Gateway is available and properly connected.
  • Ensure your internet conditions are good.
  • Make sure the password entered in the App is correct.
  • Verify that the wiring is correct according to the diagrams.

Q2: What device can be connected to this Zigbee switch module?

Most household electrical appliances, such as lamps, laundry machines, coffee makers, etc., can be connected, provided they operate within the specified voltage and wattage limits of the module.

Q3: What happens if the Wi-Fi goes off?

You can still control the device connected to the switch module with your traditional physical switch. Once Wi-Fi is active again, the device connected to the module will automatically reconnect to your Wi-Fi network.

Q4: What should I do if I change the Wi-Fi network or change the password?

You have to re-connect your Zigbee switch module to the new Wi-Fi network accordingly, as per the App User instructions (refer to the 'App Pairing' section).

Q5: How do I reset the device?

Refer to the 'Resetting the Device' section under Maintenance.

User Tips

  • If you experience light flickering, install a capacitor close to the L1 bulb. This is especially recommended for low-wattage LED bulbs. For LED bulbs over 10W, a capacitor is usually not necessary.
  • Always ensure you have a compatible Zigbee gateway (e.g., Tuya Zigbee Hub) for full smart functionality, including app and voice control.

Warranty and Support

The GIRIER Tuya ZigBee 3.0 Smart Switch Module comes with a 2-year warranty from the date of purchase. For detailed warranty terms, technical support, or further assistance, please refer to the official user manual PDF available for download. You can find the PDF manual by clicking here.

GIRIER Zigbee Switch Module packaging with manual and capacitor
Product packaging, including the instruction manual and capacitor (if applicable).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.