1. Introduction
Thank you for purchasing the PROGAGA PG370 Mini Full HD Smart Projector. This manual provides essential information for setting up, operating, and maintaining your projector to ensure optimal performance and longevity. Please read through these instructions carefully before use.
Important Safety Matters
Installation
- For better viewing, use this projector while drawing curtains or in a dark room.
- Please use projectors carefully; drops or collisions may damage components or cause blurred images and abnormal display.
Power
- When using the power cable, be careful to avoid excessive bending. Damage to the power cable may cause electric shock and fire.
- After turning off the power, it is best to unplug the power cable.
Cleaning
- Unplug the power cord first.
- Regularly wipe with a damp cloth or lens paper; do not scratch the lens.
- Clean the projector's vents and speakers regularly with an armrest brush, otherwise the ventilation will be blocked.
High Temperature Precautions
- When projected or just finished, the vent attachment can be very hot and will burn if touched.
- When projecting, please do not look directly into the lens, or it may hurt your eyes.
Warm Reminder
- Do not remove the projector, otherwise there is a risk of electric shock, and the removal process will affect the normal warranty.
- Please do not place any liquids or heavy objects on the projector.
- To ensure the stability of heat dissipation, please open the height bracket at the bottom of the projector before starting.
2. Package Contents
Please check the box for the following items:
- Projector Unit
- Remote Control (x1)
- Power Cord (x1)
- Lens Cap (x1)
- HD Cable (x1)
- User Manual (this document)
3. Product Overview
The PROGAGA PG370 is a mini Full HD smart projector designed for home theater and portable video projection. It supports 4K decoding, features 450 ANSI Lumens brightness, and includes auto-focus and auto vertical keystone correction for easy setup.
Image: PROGAGA PG370 Mini Projector showcasing its features like 4K decoding, 450 Ansi Lumens, 0.8:1 Throw ratio, Auto focus, and Keystone correction.
Image: The compact PROGAGA PG370 projector positioned on a wooden desk, demonstrating its small footprint.
Product Features
- Native Resolution: 1920x1080P, supports 4K Decoding
- Brightness: 450 ANSI Lumens (11000 Lumens)
- Contrast Ratio: 10000:1
- System: Android 11
- Connectivity: 2.4G / 5G / WiFi 6, Bluetooth 5.4
- Focus: Auto Focus
- Keystone Correction: Auto Vertical Keystone
- Throw Ratio: 0.8:1
- Adjustable Angle: 180 degrees
- Lamp Life: 50,000 hours
- Speaker: Built-in 5W speaker
- Ports: HDMI, USB, 3.5mm Earphone Out, Ethernet, POWER
- Ash Cleaning Port: Yes
Component Identification
Image: Diagram illustrating the multiple ports available on the projector, including USB, Audio (3.5mm Jack), and HD (HDMI), and compatible devices such as iPhone, external speakers, headphones, Nintendo Switch, TV-stick, TV Box, and PC/Laptop.
- Projector lens
- Infrared receiving port
- USB1 port
- USB2 interface
- HDMI 1 HD interface
- HDMI2 HD interface
- Wired network port
- AV interface
- Headphone jack
- Power socket
- Horn
- Diaphragm
- Air inlet window
- Heat dissipation window
- Power on key
- Arrow keys (Up, Down, Left, Right)
- Confirm key
- Return key
- Manual focus +
- Manual focus -
- Detachable air filter
- Height adjustment machine foot
- Bottom labeling
Image: Close-up view of the projector lens assembly, highlighting its multi-layered design and indicating a 50,000-hour lamp life.
Product Video Overview
Video: A comprehensive overview of the PROGAGA PG370 projector, demonstrating its physical features, connectivity options, adjustable stand, and key functionalities like auto-focus, keystone correction, and display settings.
4. Setup
Projector Installation
The projector can be installed in various ways depending on your environment and needs. Ensure proper ventilation around the unit.
Standard Setting (Projection Distance vs. Screen Size)
Refer to the table below for recommended projection distances based on desired screen size:
| Picture Scale | 16:9 |
|---|---|
| Projection Distance (m) | Picture Size (inch) |
| 1.7 | 50 |
| 2.38 | 70 |
| 3.30 | 100 |
| 3.97 | 120 |
| 5 | 150 |
Note: The above data is for reference only; please refer to actual measurement.
Installation Modes
The projector supports various installation modes:
- Bracket Hoisting and Throwing: Projector mounted on a ceiling bracket, projecting onto the screen.
- Countertop Placement: Projector placed on a flat surface, projecting onto the screen.
- Bracket Hoisting Rear Projection: Projector mounted on a ceiling bracket behind a translucent screen, projecting from the rear.
- Table Place Rear Projection: Projector placed on a table behind a translucent screen, projecting from the rear.
Note: To ensure the projected image does not appear geometrically distorted (trapezoidal) after installation, install the projector vertically on the axis of symmetry between the left and right sides of the screen.
- When using the hoisting mode, the projector should not be higher than the upper edge of the screen, otherwise the effect of the image or the ladder correction will be affected.
- Be sure to install the projector on the symmetry axis of the left and right of the screen, so as not to cause the image to be trapezoidal distortion.
- After installation, the projector should be well ventilated around, and no objects should cover or block the vent of the projector.
- During installation, please do not operate with power on to avoid electric shock risk or projector circuit failure.
- When the newly installed projector is turned on for the first time, the image may appear trapezoidal distortion and blurring on the top and bottom. Please refer to the "Image focusing/Trapezoidal correction" section for adjustment.
Remote Control
The remote control allows you to navigate the projector's interface and settings. Familiarize yourself with its buttons:
- Power
- Mute key
- Home button
- Set key
- Arrow button
- Menu
- Return key
- Pause key
- Volume up
- Focus Plus
- Volume down
- Focus reduction
- Signal
Remote Control Pairing (for first use)
After starting up the projector, connect to Wi-Fi first. The remote control should be aimed at the remote control receiving window of the projector.
- Use arrow keys to select Settings on the home screen.
- After the screen is displayed, select Bluetooth Settings. Press OK key to enter Bluetooth manual pairing mode.
- Long press the left and right buttons on the remote control; the remote indicator flashes to enter the pairing mode, and search for Bluetooth devices for pairing and connection.
5. Operation
Power On/Off Projector Operation
- Connect Power: Connect the projector to the power supply. The projector will enter standby mode, and the power key indicator light will be red.
- Boot Operation: Press the power button on the body or the power button on the remote control. The power indicator will turn from red to blue, indicating the projector is in working state.
- Shutdown Operation: In the working state, press the power button on the body or the power button on the remote control. The power indicator turns from blue to red, and the projector shuts down.
Image Adjustment (Focus & Keystone Correction)
After the projector starts, the main interface picture appears. If the projection picture is not clear, use the remote control to adjust:
Image: Diagram illustrating the Auto focus & Zoom function, showing how the image adjusts from 100% to 80% zoom, and the Auto Vertical Keystone and Auto Focus Lens features.
- Auto Focus: Press the remote control's F+/F- keys. The lens will rotate left and right until the picture is clear. The projector also features an auto-focus lens for automatic clarity adjustment.
- Auto Vertical Keystone: The projector automatically corrects vertical trapezoidal distortion.
- Manual Trapezoidal Correction: If the image is still distorted, go to Home screen > Settings > Screen Settings > Ladder Correction, and select