1. Introduction
The Milfra Smart WiFi PIR Motion Sensor Switch is an advanced human body infrared detector designed to bring smart automation to your home lighting. This device integrates motion sensing, ambient light detection, and multiple control methods, including manual, voice, and app control, to enhance convenience and energy efficiency. It is compatible with Tuya Smart, Smart Life, Amazon Alexa, and Google Assistant.
2. Safety Information
- Always turn off power at the circuit breaker before installing or servicing the switch.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Ensure all wire connections are secure and properly insulated to prevent electrical hazards.
- Do not install in wet locations or where it may be exposed to water.
- This device is for indoor use only.
3. Package Contents
- Milfra Smart WiFi PIR Motion Sensor Switch
- User Manual (This document and a detailed PDF guide are available. Refer to the PDF for comprehensive diagrams and instructions: Milfra Smart Switch User Manual PDF)
- Mounting Screws
4. Specifications
| Attribute | Specification |
|---|---|
| Model Number | Smart Wifi Motion Sensor (P042-247-MFA05F) |
| Material | Plastic |
| Switch Type | Push Button Switch |
| Features | PIR Motion Sensor, Ambient Light Sensor, Smart Control |
| Item Type | SWITCHES |
| Is Smart Device | Yes |
| Voltage | 100-120V |
| Wireless Connectivity | Wi-Fi 2.4GHz (IEEE 802.11 b/g/n) |
| Ambient Light Sensor Threshold | Activates when brightness is less than 15 lux |
| Certifications | RoHS, FCC, CE |
| Origin | Mainland China |
5. Installation
5.1 Pre-installation Checklist
- Neutral Wire Required: This smart switch requires a neutral wire for operation. Verify its presence in your electrical box before installation.
- Wi-Fi Network: Ensure you have a 2.4GHz Wi-Fi network available. The switch does not support 5GHz Wi-Fi.
- Power Off: Turn off power at the circuit breaker for the switch location.
5.2 Wiring Diagrams
The Milfra Smart WiFi PIR Motion Sensor Switch can replace both 3-way and single-pole switches. Below are common wiring configurations. Always ensure power is off before wiring.
Important Wiring Notes:
- Neutral Wire: Connect the neutral wire from your electrical box to the neutral terminal on the smart switch.
- Live Wire: Connect the live (hot) wire from your electrical box to the live terminal on the smart switch.
- Load Wire: Connect the load wire (to the light fixture) to the load terminal on the smart switch.
- Traveler Wires (for 3-Way): In a 3-way setup, connect the traveler wire(s) as indicated in the diagram. The smart switch will typically replace one of the existing 3-way switches, and the other will remain a standard 3-way switch.
- Insulation: Ensure all wire connections are tightly secured with wire nuts and properly insulated.
For detailed wiring instructions and diagrams, please refer to the comprehensive user guide PDF.
5.3 Physical Installation
- After wiring, carefully push the switch into the wall box.
- Secure the switch to the wall box using the provided mounting screws.
- Attach the wall plate (not included, typically uses standard wall plates).
- Restore power at the circuit breaker.
6. Setup (App Pairing)
To unlock the smart features of your Milfra Motion Sensor Switch, you need to pair it with the Tuya Smart or Smart Life app.
- Download App: Download the 'Tuya Smart' or 'Smart Life' app from your smartphone's app store (iOS or Android).
- Register/Login: Open the app and register for a new account or log in with an existing one.
- Add Device: Tap the '+' icon in the top right corner of the app to add a new device.
- Select Device Type: Choose 'Sensor' from the device categories, then select 'PIR Sensor (Wi-Fi)'.
- Confirm Indicator: Follow the in-app instructions to put the switch into pairing mode. This usually involves pressing and holding the switch button until the indicator light rapidly blinks. Confirm this in the app.
- Connect to Wi-Fi: Enter your 2.4GHz Wi-Fi network name and password.
- Pairing: The app will begin searching for and connecting to your device. This may take a few moments.
- Device Added: Once successfully paired, you can rename your device and start controlling it via the app.
7. Operation
7.1 Multiple Control Methods
- Manual Control: Use the physical push button on the switch to turn lights on or off. The button features an automatic return after release.
- Voice Control: Integrate with Amazon Alexa or Google Assistant for hands-free control. Once linked, you can use commands like "Alexa, turn off the light" or "Hey Google, turn on the living room lights."
- Human Body Induction (PIR Motion Sensor): The switch will automatically activate (turn on lights) once human motion is detected within its range.
- APP Remote Control: Control your home's lights anytime, anywhere, using the Tuya Smart or Smart Life app on your smartphone.
7.2 Motion Sensing Functionality
The integrated PIR (Passive Infrared) motion sensor detects movement within its field of view. When motion is detected, the switch can be configured to automatically turn on the connected lights. You can adjust sensitivity and duration settings within the app.
7.3 Ambient Light Sensor
The switch is fitted with an ambient light sensor that prevents it from activating if there is already sufficient light in the room. The motion sensor will only trigger the lights when the detected brightness is less than 15 lux, ensuring energy is not wasted by turning on lights during daylight hours.
7.4 Lamp Compatibility
The Milfra Smart Motion Sensor Switch is compatible with a variety of lamps, including energy-saving lamps, incandescent lamps, and LED lamps, offering stable performance across different lighting types.
8. User Tips
- App Scheduling: The app's programming window includes 'Target time' and 'Appointment time' settings. These are typically used to set schedules for when the motion sensor should be active or inactive, or to schedule specific on/off times for the lights, overriding the motion sensor if desired.
- Neutral Wire for Basic Functionality: Even if you only intend to use the switch for basic motion detection without smart features, a neutral wire is still required for the device to function correctly.
- Optimal Placement: For best motion detection, install the switch in a location where the sensor has a clear line of sight to the area you wish to monitor, avoiding obstructions.
- Quality Product: Users have reported excellent quality and top-notch performance from this product.
9. Troubleshooting
- Lights not turning on with motion: Check app settings for motion sensitivity and ambient light threshold. Ensure the sensor is not obstructed. Verify power to the switch.
- Switch not connecting to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. Check Wi-Fi password. Try moving the switch closer to your router during setup. Reset the switch to pairing mode.
- Voice control not working: Ensure the switch is properly linked to Alexa or Google Home accounts within the Tuya Smart/Smart Life app. Check your internet connection.
- Lights flickering or not working: Verify all wiring connections are secure. Ensure the lamp type is compatible.
For more detailed troubleshooting steps, please consult the full user manual PDF.
10. Frequently Asked Questions (FAQ)
- Q: Is a neutral wire required for this smart switch?
- A: Yes, a neutral wire is required for the proper operation and installation of the Milfra Smart WiFi PIR Motion Sensor Switch.
- Q: Can I use this switch for motion detection only, without connecting it to Wi-Fi or smart features?
- A: While the switch can function as a basic motion sensor, a neutral wire is still required for its power supply. For full functionality and customization, Wi-Fi connection and app setup are recommended.
- Q: Is this product compatible with Samsung SmartThings?
- A: The product is designed to work seamlessly with Tuya Smart/Smart Life apps, Amazon Alexa, and Google Home. Compatibility with other smart home platforms like Samsung SmartThings is not explicitly guaranteed and may require third-party integrations or hubs not provided by Milfra.
11. Maintenance
- Cleaning: Gently wipe the switch surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Tuya Smart/Smart Life app for available firmware updates to ensure optimal performance and security.
12. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official Milfra website or contact the seller directly. Keep your purchase receipt as proof of purchase.
Additional resources, including a detailed user manual, can be found in PDF format: Milfra Smart Switch User Manual PDF.