XIAOMI CW500

Contents

Xiaomi Outdoor CW500 Dual Camera User Manual

Model: CW500 (MJSXJ08HL)

Xiaomi Outdoor CW500 Dual Camera

The Xiaomi Outdoor CW500 Dual Camera, designed for comprehensive outdoor surveillance.

Introduction

This document serves as a technical guidance manual, outlining the basic steps and installation methods for the Xiaomi Outdoor CW500 Dual Camera. The instructions are generally applicable to all Xiaomi camera series.

Note: The illustrations of the product, accessories, user interface, and other diagrams in this manual are schematic and for reference only. Due to product updates and upgrades, there may be slight differences between the actual product and the schematic. Please refer to the actual product for precise details.

Setup

1. Power Connection

  1. Insert the power cable into the Type-C power connector located on the back of the camera.
  2. The camera will automatically power on, indicated by an orange fast-flashing light.

Tip: After powering on, do not manually twist the ball head of the camera to force it to rotate. If the lens positioning is inaccurate, you can calibrate it through the Mi Home APP.

2. Indicator Light Status

  • Blue (always on): Connection successful / normal status.
  • Blue (blinking): Network abnormality.
  • Orange (fast flash): Waiting for connection.
  • Orange (slow flash): Upgrading.

3. MicroSD Card Installation

Ensure the camera is powered off before installing or removing the microSD card. Insert the microSD card into the slot with the contact side facing up.

Note: Use a microSD card (8GB~256GB) from a reputable manufacturer. The recommended read/write speed should not be lower than U1/Class10 level.

4. Mounting Device

The Xiaomi Smart Camera CW500 can be placed on a flat surface (e.g., desk, table) or securely mounted on a wall.

5. Connecting to Mi Home App

This product connects to Mi Home and is controlled via the Mi Home APP. Follow these steps:

  1. Power on the camera and wait for the indicator light to flash orange.
  2. Download and install the Mi Home APP from your application store.
  3. Open the Mi Home APP and log in.
  4. Click the "+" icon in the upper right corner of the home page to add devices.
  5. Scan the QR code (provided below) or manually add the corresponding camera.
  6. Follow the voice prompts, enter your Wi-Fi password, and wait for a successful connection.
QR code for Mi Home App connection

QR code for easy connection to the Mi Home App.

Tip: Due to Mi Home APP updates, actual operations may vary slightly. Always follow the current guidelines within the Mi Home APP. Ensure a smooth network connection during setup.

6. Resetting Factory Settings

If you change your network or Mi Home APP account, you will need to reset the camera. Press and hold the reset button for approximately 7 seconds until the indicator light flashes orange. The camera will then restore factory settings, and you can reconnect it to the Mi Home APP.

Note: Restoring factory settings will not delete the contents of the microSD card.

Operating Instructions

1. Real-time View

Through the Mi Home APP control interface, you can view the camera's monitoring screen in real-time. You can adjust sharpness, horizontal and vertical angles, intercept and record the screen, and make remote calls.

2. Intelligent Night Vision

The camera automatically switches between day and night vision modes based on ambient light changes. It features built-in infrared night vision lights and white fill lights for clear shooting in dark environments. This allows for full-color night vision, especially when detecting human figures.

Intelligent Night Vision Diagram

Diagram illustrating the camera's infrared and white fill lights for enhanced night vision and human figure detection.

3. History Playback

Playback of historical videos is available after installing a compatible microSD card or purchasing a cloud storage service. In the Mi Home APP, click "Look Back" to access the playback interface. Drag the timeline to select the desired period and use the timespeed fast-forward playback feature.

4. Automatic Care (Watchman Assistant)

Enable the watchman assistant function to allow the camera to detect human figures and movement changes within its view. The system will push recorded videos of these events to the Mi Home APP, providing automatic surveillance. You can customize watchman settings, including all-day, daytime, or nighttime monitoring, and set alarm intervals.

5. Share Video

In the Mi Home APP control interface, you can share the camera as a shared device. Invite others to view the feed through the device sharing option in the settings menu. Shared users will need to download the Mi Home APP and log in with a Xiaomi account.

6. Physical Masking

To protect your privacy when the camera is not needed, you can tap the masking icon in the live screen of the Mi Home APP. Alternatively, enable the physical masking switch in Settings > Camera Settings > Physical Masking Settings, or set a timer for automatic physical masking. The camera will adjust its lens to be covered by the body shell.

Maintenance

Cautions

  • The applicable working temperature for this product is -10°C to 45°C. Do not use it in environments with excessively high or low temperatures.
  • This is a precision electronic product. Avoid using it in excessively humid environments or where it may come into contact with water, as this can affect normal operation.
  • To ensure optimal image quality, avoid placing the front and sides of the lens close to glass, white walls, or other reflective objects. This prevents issues like bright areas near the lens and dark or white phenomena in the distance.
  • Ensure the camera is installed within Wi-Fi signal coverage and in a location with the best possible signal. Keep it away from metal objects and microwave ovens, which can interfere with the signal.
  • Always use the original power adapter to prevent device malfunction due to insufficient power supply.
  • For stable data transmission, especially when the distance is too far or signal is disturbed, connect the camera via a network cable.
Network Cable Connection

Image showing the network cable connection for stable data transmission.

Troubleshooting

  • Network Abnormality: If the indicator light is blue and blinking, check your network connection and router.
  • Waiting for Connection: If the indicator light is orange and fast flashing, ensure your Wi-Fi password is correct and the camera is within range.
  • Inaccurate Lens Positioning: If the camera lens does not position correctly, use the Mi Home APP to recalibrate it.
  • Mi Home APP Connection Issues: Ensure your network is smooth and the camera is powered on. If issues persist, try resetting the camera to factory settings and reconnecting.

Specifications

Feature Specification
Model NumberMJSXJ08HL
Brand NameXIAOMI
High-involved chemicalNone
Zoom TypeOptical zoom
Zoom8x
Lens QuantityDual lens
AI FunctionsVehicle Detection
Color Night VisionYes
IP RatingIP66
App Namemihome
Power ModeMains Electricity
Rechargeable Battery CapacityOther
Rechargeable BatteryNo
SceneIndoor and Outdoor
Movement Range (Tilt)-10° - 180°
Movement Range (Pan)0° - 360°
Pixel4 MP
Power SupplyNormal
StorageNone (requires microSD or cloud)
InstallationCeiling
ColorWhite
Audio OutputTwo Way Audio
Minimum Illumination (lux)1.6
Viewing Angle360°
Video Compression FormatH.265
IR Distance (m)10 m
Power Supply (V)12 V
Power Consumption (W)12 W
Supported Mobile SystemsAndroid, iOS
SensorCMOS
Supported Operating SystemsNo (mobile app only)
Lens (mm)2MM
ConnectivityIP network wireless
High Definition4.0 megapixels (2.5K)
StyleDome camera
OriginCN (Origin)
Special FeaturesWaterproof/Weatherproof
CertificationCE, FCC, RoHS, WEEE
Alarm TypePhone Alarm
Smart Home PlatformMi Home
Dual 4 Megapixel Image Quality Diagram

Diagram illustrating the superior 4-megapixel image quality compared to 3-megapixel, providing 2.5K ultra-high-definition.

Mijia Security Chip

Image of the built-in Mijia security chip, ensuring data privacy and security.

User Tips

  • Regional Compatibility: Before purchase or setup, verify that the camera and its associated Mi Home APP services are fully compatible with your specific region (e.g., Singapore, UK). This includes checking for appropriate power plug types (EU, US, UK, AU).
  • Optimal Wi-Fi Placement: For the best performance and stable connection, ensure the camera is placed within strong Wi-Fi signal range and away from potential interference sources like large metal objects or microwave ovens.
  • Regular Firmware Updates: Keep the Mi Home APP and camera firmware updated to benefit from the latest features, security enhancements, and bug fixes.

Support

For further detailed information, diagrams, or specific troubleshooting not covered in this manual, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF at: Xiaomi Smart Camera User Manual PDF.

For technical support or warranty inquiries, please contact your retailer or the official Xiaomi support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.