Yinuogo YNG308

Contents

Yinuogo SOMMER Remote Control Hand Transmitter User Manual

Model: YNG308

Brand: Yinuogo

1. Introduction

This manual provides detailed instructions for the Yinuogo YNG308 Remote Control Hand Transmitter, designed for use with compatible SOMMER garage door and gate openers. This device operates on a 433.42MHz frequency and utilizes rolling code technology for enhanced security. Please read this manual thoroughly before attempting to set up or operate your new remote control.

2. Safety Information

  • Keep the remote control out of reach of children to prevent accidental operation.
  • Do not operate the gate/door if people or objects are in the path of movement.
  • Ensure the remote control is compatible with your receiver's frequency (433.42MHz) and coding method (rolling code) before attempting to program. Incompatible frequencies (e.g., 868MHz) will not work.
  • Dispose of batteries responsibly according to local regulations.
  • Do not attempt to disassemble or repair the remote control yourself. Contact qualified personnel for service.

3. Product Overview

The Yinuogo YNG308 is a compact and durable hand transmitter featuring four buttons for controlling up to four different functions or devices. It comes with a convenient keychain clip for portability.

Two Yinuogo YNG308 remote controls with keychain clips, showing compatibility with SOMMER 4013 TX03 434 4 XP, 4022 TX02-434-2, 4014 TX03-434-2 at 434.42MHz.

Figure 1: Yinuogo YNG308 Remote Control Hand Transmitter

3.1. Compatibility

This remote control is compatible with SOMMER systems operating at 433.42MHz, specifically models such as:

  • SOMMER 4013 TX03 434 4 XP
  • SOMMER 4022 TX02-434-2
  • SOMMER 4014 TX03-434-2

Important: This remote control is NOT compatible with 868MHz SOMMER systems. Please verify your existing remote or receiver's frequency before purchase and programming.

Diagram illustrating the difference between 434.42MHz and 868MHz SOMMER remote controls, showing that only 434.42MHz is compatible.

Figure 2: Frequency Compatibility Check

Comparison image showing an older SOMMER remote control next to the new Yinuogo YNG308 remote control.

Figure 3: Old vs. New Remote Comparison

4. Specifications

Attribute Value
Brand Name Yinuogo
Model Number YNG308
Name For SOMMER
Frequency 433.42MHz
Code Rolling Code
Buttons 4
Battery Include Battery
Encoding method Rolling code
Origin Mainland China
Certification CE, RoHS, WEEE

4.1. Package Dimensions

  • Length: 8 cm
  • Width: 8 cm
  • Height: 8 cm
  • Weight: 0.12 kg

5. Setup and Programming

To program your new Yinuogo YNG308 remote control, you will need access to the receiver unit of your SOMMER garage door or gate opener. The programming process involves pairing the new remote with the receiver.

5.1. Locating the Receiver

The radio receiver part of the PCB (Printed Circuit Board) is located on your operator. You can find the radio receiver:

  • DUO: Under the light cover.
  • SPRINT: By removing the control box housing.
  • MARATHO: Under the transparent plastic cover on the control box housing (code button).

5.2. Programming Steps

  1. Locate the 'A' button on the receiver's PCB.
  2. Press the 'A' button once and release it.
  3. The red light of channel 1 on the receiver will illuminate.
  4. Press the desired button on your new hand transmitter that you wish to use for operating the door/gate, and hold it down.
  5. The red light of channel 1 on the receiver will start to flash.
  6. After 2-3 seconds, the red light on channel 1 will turn off.
  7. Release the button on the hand transmitter.
  8. The coding of the hand transmitter is now complete for that button.
  9. Other buttons on your hand transmitter can be programmed for other doors/gates by repeating this procedure.

5.3. Programming Demonstration Video

Watch this video for a visual guide on how to program your remote control:

Video: Demonstration of programming a remote control to a receiver board.

6. Operating Instructions

Once programmed, operating your Yinuogo YNG308 remote control is straightforward:

  • Press the programmed button on the remote control once to activate the associated garage door or gate opener.
  • Pressing the button again will typically stop the movement, and a third press will reverse the direction (depending on your opener's logic).
  • Ensure you have a clear line of sight to the door/gate and that no obstructions are present before operating.

7. Maintenance

7.1. Battery Replacement

The remote control includes a battery. When the remote's range decreases significantly or the indicator light does not illuminate when a button is pressed, it's time to replace the battery. To replace the battery:

  1. Carefully open the remote control casing. This may involve removing small screws on the back (refer to Figure 4).
  2. Note the type and orientation of the existing battery.
  3. Remove the old battery and insert a new one of the same type, ensuring correct polarity.
  4. Close the casing securely.
Back view of the Yinuogo YNG308 remote control, showing screw points for opening the casing.

Figure 4: Back of Remote Control (for battery access)

7.2. Cleaning

Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing or internal components.

8. Troubleshooting

Problem Possible Cause Solution
Remote does not work after programming. Incorrect programming steps, incompatible frequency/code, dead battery. Re-attempt programming carefully following all steps. Verify your opener's frequency and code type. Replace battery.
Short operating range. Low battery, interference, physical obstructions. Replace battery. Ensure no large metal objects or electronic devices are blocking the signal path.
Indicator light on remote does not light up. Dead battery. Replace the battery.

9. User Tips

  • Many users have confirmed that this transmitter is perfectly compatible with Aperto TX 02 343-2 and other SOMMER 433.42MHz rolling code systems, offering simple and effective coding.
  • Always keep a spare battery on hand for your remote control to avoid unexpected interruptions.
  • Consider programming different buttons for different gates or garage doors if you have multiple compatible openers.

10. Frequently Asked Questions (FAQ)

Q: Is this remote compatible with all SOMMER openers?
A: No, it is only compatible with SOMMER openers that use a 433.42MHz frequency and rolling code technology. It is not compatible with 868MHz systems.
Q: How many devices can one remote control?
A: The YNG308 remote has 4 buttons, allowing it to control up to 4 different compatible devices independently.
Q: What should I do if the remote stops working?
A: First, check the battery and replace it if necessary. If the issue persists, re-attempt the programming steps. Ensure there are no obstructions or sources of interference.

11. Warranty and Support

For warranty information or technical support, please refer to the seller's policy or contact the point of purchase. Keep your proof of purchase for any warranty claims.

A user manual in PDF format may also be available for download. Please check the product page or contact the seller for the link: User manual (PDF)

© 2024 Yinuogo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.