1. Introduction
Thank you for choosing the VTOMAN V10 PRO Jump Starter. This device is a powerful and versatile tool designed to jump start vehicles, charge mobile devices, and power various electronics. For your safety and optimal performance, please read this manual carefully before use and keep it handy for future reference.
2. Product Layout and Package Contents
2.1. Product Layout
Familiarize yourself with the components of your VTOMAN V10 PRO Jump Starter:
Image Description: A VTOMAN V10 PRO Jump Starter unit, yellow and black, with its intelligent jumper cables attached. The unit features an indicator light panel, a power switch, various output ports, and a flashlight.
- Indicator Lights: Shows battery level and charging status.
- Power Switch: Activates the unit and controls the flashlight.
- 15V 10A Output Port: For powering vehicle products and electronics.
- LED Flash Light: Provides illumination with multiple modes.
- Quick Charge Output Port: For faster charging of compatible devices.
- USB 5V 2.4A Output Port: Standard USB output for charging devices.
- USB-C Input (Output) Port: For charging the jump starter and also functions as an output.
- Jump Start Socket: Connects to the intelligent jumper cable.
2.2. Package Contents
Ensure all items are present in your package:
| Item | Quantity |
|---|---|
| V10 PRO Jump Starter | 1 |
| Charging Cables (USB-A to Type-C, Type-C to Type-C) | 2 |
| Smart Jumper Cable | 1 |
| Storage Case | 1 |
| User Manual | 1 |
3. Setup and Initial Charging
3.1. Checking Battery Level
Press the power switch briefly to check the jump starter's battery level. The indicator lights will illuminate to show the current charge:
- Unlit: 0%
- 4 Flashing: 10%
- 1 Light: 25%
- 2 Lights: 50%
- 3 Lights: 75%
- 4 Lights: 100%
3.2. Charging the V10 PRO
Before first use, fully charge your V10 PRO. It takes approximately 4-5 hours for a full charge via the USB-C input.
- Connect the provided USB cable to a home adaptor (not included).
- Plug the home adaptor into a universal wall socket.
- Connect the USB-C connector of the cable to the USB-C input port on the V10 PRO host.
The indicator lights will flash sequentially during charging. Once fully charged, all indicators will turn off.
4. Operating Instructions
4.1. Jump Starting a 12V Vehicle
Important: Ensure the jump starter is at least 50% charged before attempting to jump start a vehicle.
- Connect the Jumper Cable: Fully insert the blue plug of the smart jumper cable into the jump start socket on the V10 PRO host.
- Attach to Car Battery:
- Attach the Red Clamp to the positive (+) battery terminal of your vehicle.
- Attach the Black Clamp to the negative (-) battery terminal of your vehicle.
- Observe Cable Indicator: Follow the instructions based on the indicator light on the smart jumper cable:
- GREEN LIGHT on: Connection is correct and circuit is working. You can turn on the engine to jump-start directly.
- GREEN LIGHT blinking: Vehicle battery is low. Press the "BOOST" button on the cable, wait for the GREEN LIGHT to become solid, then turn on the engine within 30 seconds.
- REVERSE RED LIGHT on: Connection is wrong (reverse polarity). Correct the clamps as described in step 2. Wait until the GREEN LIGHT is on before starting the engine.
- No Lights on: Vehicle battery may be damaged. After confirming correct clamp connection, press the "BOOST" button, wait for the GREEN LIGHT to turn solid, then turn on the engine within 30 seconds.
- Start Vehicle: Once the indicator shows it's safe, start your vehicle's engine.
- Remove Jumper Cable: As soon as the vehicle starts, remove the jumper cable from the vehicle battery within 30 seconds. Leave the vehicle's engine running.
4.2. Charging Mobile Phones or Tablets
- Plug your device's charging cable into either the Quick Charge output port or the USB 5V 2.4A output port on the V10 PRO.
- Connect the other end of the cable to your mobile phone or tablet.
- Press the power switch on the V10 PRO to begin charging.
4.3. Powering Vehicle Products or Electronics
- Plug the optional switch cable (if required by your device) into the 15V 10A output port on the V10 PRO.
- Connect the other end of the switch cable to your vehicle product or electronic device.
- Press the power switch on the V10 PRO to supply power.
4.4. Using the LED Flashlight
- To Turn On: Press and hold the power switch for 3 seconds to start the LED flashlight.
- To Cycle Modes: Briefly press the power switch to cycle through the 3 modes: Normal, Strobe, SOS.
- To Turn Off: Briefly press the power switch after the SOS mode to turn off the flashlight.
5. Maintenance
- Recharging: To extend battery life, it is recommended to recharge the V10 PRO every 3 months, even if not in use.
- Storage Temperature: Do NOT store the unit in locations where the temperature may exceed 60°C (140°F).
- Charging Temperature: Charge the unit only at ambient temperatures between 0°C (32°F) and 45°C (113°F).
- Cleaning: Keep the unit dry and clean. Wipe with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Water Exposure: Do NOT expose the product to rain or water.
6. Troubleshooting
If you encounter issues with your V10 PRO, refer to the table below:
| Finding | Cause | Remedy |
|---|---|---|
| No response when pressing the switch button. | Low voltage protection of Jump Starter is activated. | Plug the adapter into the USB-C input port to activate the unit. |
7. Specifications
| General Specifications | |
|---|---|
| Model No. | JS-391 (V10 PRO) |
| Battery Capacity | 20000mAh / 3.7V / 74Wh |
| Battery Type | Lithium Polymer Battery |
| Starting Current | 800A |
| Peak Current | 4500A |
| Gas Engine Rating | All GAS Engines |
| Diesel Engine Rating | Up to 10L Diesel Engines |
| Input (USB-C) | 5V/3A (15W) |
| USB-C Output | 5V/3A (15W) |
| USB-A Output 1 (Quick Charge) | 5V/3A, 9V/2A, 12V/1.5A |
| USB-A Output 2 | 5V/2.4A |
| DC Output | 15V/10A |
| Full Charging Time | Approx. 4-5 hours (with 5V/3A input) |
| Battery Cycle Life | Over 1000 times |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Dimensions | 230 x 94 x 35mm |
| Weight | 640g |
| LED Light Modes | Strong, Strobe, SOS |
| Protection Features | Spark-proof, Reverse-charge, Over-current, Over-charge, Reverse-polarity, High-temp, Low-temp, Short-circuit, Over-voltage, Over-load protection |
8. User Tips
- The "BOOST" mode on the smart jumper cable is highly effective for completely dead batteries.
- This unit is noted for its strong performance and ability to hold tension well, making it reliable in emergencies.
- Its compact size and quality build make it a convenient tool to keep in your vehicle.
9. Safety Information and Warnings
Please read all safety warnings carefully before using this product to prevent injury or damage.
- Read the instruction manual carefully before using this unit.
- Do NOT use this unit in place of a vehicle battery.
- Do NOT use this unit as a toy. Keep out of reach of children.
- Do NOT connect the two jumper cable clamps together.
- Ensure there is no corrosion or foreign matter on battery terminals before connecting.
- After successfully starting the car, remove the product from the car battery within 30 seconds to prevent damage.
- Do NOT attempt to jump start more than 3 times in a row. Allow a 2-minute interval between attempts to prevent overheating.
- Do NOT use the jumper cable to charge other equipment.
- Charge only at ambient temperature between 0°C and 45°C.
- Do NOT expose the product to rain, water, extreme heat, or fire.
- Do NOT operate the product in explosive atmospheres.
- Do NOT use a battery pack or appliance that is damaged or modified.
- Charge only using the charger provided with this unit or a compatible standard charger.
- Do NOT charge the unit immediately after jump starting a car.
- Do NOT use the unit to jump start a vehicle while charging its internal battery.
- If battery liquid leaks, do NOT handle with bare hands. In case of skin contact, wash with soap and water. In case of eye contact, rinse with cold water for at least 10 minutes and seek medical attention.
- Dispose of the product according to local regulations at the end of its life, as it contains a lithium-based battery.
10. Warranty and Support
10.1. Warranty
The VTOMAN V10 PRO Jump Starter comes with a 24-month limited warranty from the date of purchase. This warranty covers manufacturing defects and workmanship. Please retain your proof of purchase for warranty claims.
10.2. Frequently Asked Questions (FAQ)
- How to turn off the V10 PRO? The V10 PRO will power off automatically when there is no load or when charging is complete.
- How long does it take to fully charge the V10 PRO? Approximately 4-5 hours through the USB-C input.
- How many times can this appliance charge my cell phone? This depends on your phone's battery capacity. For example, it can fully charge an iPhone 13 approximately 6 times.
- How many times can this appliance jump start a 3.0L Gasoline vehicle on a full battery? Approximately 70 times on a single charge.
- How long will the battery storage remain? The battery can hold a charge for up to 24 months. However, we recommend recharging it every 3 months to extend battery life.
10.3. Customer Support
For any questions, technical support, or warranty inquiries, please contact us:
- Email: Support@vtoman.com
You can also refer to the official user manual PDF for more detailed information: View User Manual (PDF)