Introduction
Thank you for choosing the VTOMAN V8 Pro Jump Starter. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before operation and keep it for future reference.
Product Parts and Functions
Familiarize yourself with the components of your VTOMAN V8 Pro Jump Starter:

Image: Detailed diagram of the VTOMAN V8 Pro Jump Starter with each part labeled for easy identification.
- LED Flashlight (SOS)
- Red Emergency Light
- 12V Jump Cable Socket
- ON/OFF Switch
- Power Button
- 5V/9V Quickcharge Output (USB1)
- 5V/2.1A Output (USB2)
- 12V/10A Output (DC)
- 15V/1A Input (Charging Port)
- LCD Screen
- Compass
Setup
Charging the VTOMAN V8 Pro
Before first use, or if the device has not been used for an extended period, fully charge your jump starter.
- Ensure the ON/OFF switch is in the "ON" position.
- Plug the wall charger into the 15V/1A input port of the device.
- Plug the wall charger into a standard 100-240V universal input socket.
- The LCD screen will indicate charging status.
Diagram from PDF page 5 shows the wall charger connected to the device's input port and then to a power outlet.
LCD Screen Display
The LCD screen provides important information about the device's status. To view the remaining power, ensure the ON/OFF switch is "ON" and press the Power Button.
- "100% IN": Indicates the device is fully charged.
- "100% OUT": Indicates the device is currently charging an external device.
- "100% 5V": Indicates 5V/2.1A USB output is available.
- "100% 12V": Indicates 12V/10A DC output is available.
- "100% Quick Charge": Indicates 5V/9V Quickcharge USB output is available.
Diagrams from PDF page 4 illustrate these LCD screen indicators.
Operating Instructions
Jump Starting a Vehicle
The VTOMAN V8 Pro can jump start 12V vehicles with up to 8.5L gas engines and 6.5L diesel engines.

Image: VTOMAN V8 Pro connected to a car battery, illustrating its capability to jump start various vehicles including cars, motorcycles, trucks, and motorboats.
- Check Charge Level: Ensure the jump starter is at least 50% charged (indicated by 2 or more bars on the LCD). If unused for over two months, charge it first.
- Connect Jumper Cable: Attach the intelligent jumper cable to the 12V Jump Cable Socket on the jump starter.
- Connect to Car Battery:
- Attach the RED clamp to the positive (+) terminal of the car battery.
- Attach the BLACK clamp to the negative (-) terminal of the car battery.
- Check Jumper Cable Indicators:
- GREEN LIGHT ON: Connection is correct. Proceed to start your car.
- RED LIGHT WITH BUZZING: Indicates wrong polarity. Reconnect clamps correctly until the green light is on.
- GREEN LIGHT BLINKING: Car battery voltage is too low. Press the "BOOST" button on the jumper cable until the green light is solid, then start the car within 30 seconds.
- NO LIGHT AND NO BUZZING: Car battery may be damaged. Ensure correct connection, press "BOOST" button, and start within 30 seconds if green light appears.
- Start Vehicle: Start your vehicle's engine.
- Remove Jumper Cable: Once the car starts, remove the jumper cable from the car battery first, then from the jump starter.
Diagrams from PDF pages 5 and 6 illustrate the connection steps and jumper cable indicator lights.
Charging Other Devices (Portable Power Bank)
The VTOMAN V8 Pro can charge various electronic devices via its USB and DC output ports.

Image: VTOMAN V8 Pro acting as a portable power bank, charging a phone, tablet, and smartwatch simultaneously using its multiple output ports.
- Ensure the ON/OFF switch is "ON".
- Connect your device (e.g., cell phone, tablet) to the jump starter using a compatible USB cable.
- Press the Power Button to begin charging.
Diagram from PDF page 7 shows a phone connected to the jump starter via a USB cable for charging.
Powering Other 12V Car Equipment
The 12V/10A DC output port can power compatible 12V car accessories (e.g., tire inflators, car vacuums).
- Plug a cigarette lighter adapter (not included) into the 12V/10A DC output port.
- Connect your 12V car equipment to the cigarette lighter adapter.
- Press the Power Button to supply power.
LED Flashlight Operation
The built-in LED flashlight has multiple modes for various situations.

Image: VTOMAN V8 Pro's flashlight demonstrating its three modes: normal flashlight, strobe, and SOS, along with a red emergency light feature.
- Turn On/Cycle Modes: Press and hold the Power Button for a few moments to turn on the flashlight. Press it again to cycle through modes: Normal Light → Strobe → SOS → OFF.
- Red Emergency Light: Double-click the Power Button to turn on the red emergency light. Double-click again to turn it off.
Maintenance
- Charging Frequency: To extend battery service life, it is recommended to charge the device every three months, even if not in use.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive materials.
- Battery Life: The typical lifetime of the V8 Pro battery is 3-5 years under normal conditions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not start, Red Light with Buzzing on Jumper Cable | Incorrect battery polarity connection. | Disconnect clamps and reconnect: Red to positive (+), Black to negative (-). Ensure green light is solid before attempting to start. |
| Vehicle does not start, Green Light Blinking on Jumper Cable | Car battery voltage is too low. | Press the "BOOST" button on the jumper cable until the green light is solid. Start the car within 30 seconds. |
| Vehicle does not start, No Light and No Buzzing on Jumper Cable | Car battery may be severely discharged or damaged. | Ensure correct connection. Press "BOOST" button. If green light appears, start within 30 seconds. If not, the battery may need professional inspection. |
| Device not charging external devices | ON/OFF switch is off, or device is out of charge. | Ensure ON/OFF switch is "ON". Check device charge level and recharge if necessary. Press Power Button to initiate charging. |
Specifications
| Model | V8 Pro (Epower-130) |
| Battery Capacity | 15000mAh / 3.7V / 55.5Wh |
| Peak Current | 3000A |
| Starting Current | 500A (3s), 300A (5s) |
| Input | 15V/1A |
| Output 1 (USB) | 5V/9V Quick Charge |
| Output 2 (USB) | 5V/2.1A |
| Output 3 (DC) | 12V/10A (120W) |
| Full Charging Time | 4.5 hours |
| Jump Start Voltage | 12V |
| Gas Engine Rating | Up to 8.5L |
| Diesel Engine Rating | Up to 6.5L |
| Battery Cycle Life | Over 1000 times |
| Operating Temperature | -20℃ to 60℃ (-4°F to 140°F) |
| Battery Type | Lithium Polymer Battery |
| LED Light Modes | Strong, Strobe, SOS |
| Material | ABS V0 Military Grade |
| Functions | Waterproof, Dustproof, Drop-resistant, LCD Screen, Compass |
| Dimensions | 185 x 87 x 40mm |
| Unit Weight | 550g |
| External Testing Certification | WEEE, MSDS, ROHS, FCC, CE, UL |
User Tips
- The built-in flashlight, while not extremely powerful, is useful for emergencies or in low-light conditions.
- Always ensure the device is adequately charged before attempting to jump start a vehicle for optimal performance.
- The device is robust and well-built, ensuring durability for outdoor use.
Package Contents
The VTOMAN V8 Pro package includes:

Image: All items included in the VTOMAN V8 Pro package: the jump starter unit, jumper cables, USB-C cable, and storage bag.
- VTOMAN V8 Pro Jump Starter x1
- Intelligent Jumper Cable x1
- USB Charging Cable x1
- Wall Charger x1
- User Manual x1
- Carrying Bag x1
Safety Instructions and Warnings
Failure to follow these instructions may result in electric shock, fire, or serious injury.

Image: Visual representation of the VTOMAN V8 Pro's safety features, including protection against over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltage, over-load, and reverse-charge.
- Read all instructions carefully before using the device.
- Keep the device out of reach of children.
- Do not expose the product to temperatures exceeding 60°C (140°F).
- Do not immerse the product in water.
- Avoid placing the product in extremely hot environments or near fire.
- Do not operate the product in explosive environments (flammable liquids, gases, dust).
- This device is not a toy.
- Do not use this device for charging a car battery (it is for jump starting).
- Avoid dropping the product. If damaged, have it repaired by a qualified technician.
- Do not use damaged or modified battery packs.
- Ensure someone is nearby when using the device.
- Remove metal accessories (rings, bracelets, necklaces) before use to prevent short circuits.
- Ensure the power is above 75% when jump starting a car.
- This product is only for starting 12V gasoline and diesel vehicles. Do not use it on airplanes, ships, or other equipment.
- It can only power small automotive electronics (e.g., portable tire air pumps), not all 12V automotive products.
- Ensure the blue end of the smart jump clamps is fully inserted into the 12V car start port to prevent melting.
- Use only the provided jump clamps. Stop use if battery dip or wire is damaged.
- Ensure no rust or foreign matter on the interface before connecting clamps.
- Do not jump start while the device is charging.
- Do not continuously jump start more than 3 times. Allow 2 minutes between starts to prevent overheating.
- Remove the product from the car battery within 30 seconds after a successful start.
- Do not charge the device immediately after jump starting a car.
- Charge the device in an environment temperature between 0°C and 45°C.
- Use only the provided wall charger or one with identical specifications.
- If the battery leaks, do not touch the liquid directly. Rinse with soap and water. If in eyes, rinse with cold water for 10 minutes and seek medical attention.
- Recycle the product with appropriate equipment if the battery leaks.
- Dispose of lithium battery products according to local regulations at the end of their life.
Toxic and Harmful Substances
The VTOMAN V8 Pro complies with RoHS standards. All toxic and hazardous substances content is below the MCV limit specified in Standard 2002/95/EC(RoHS).
| Substance | Pb (Lead) | Hg (Mercury) | Cd (Cadmium) | Cr (VI) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Content | O | O | O | O | O | O |
"O" indicates that the toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.
Warranty and Support
- Warranty: 18 Months Limited Warranty Service.
- Technical Support: Lifetime Technical Service.
- Contact Us: For any inquiries, support, or FAQ, please contact: Support@vtoman.com
Made in China
Certifications: CE FC RoHS
