SAIFULI BBJ120DB

Contents

SAIFULI BBJ120DB Explosion-Proof Sound and Light Alarm

User Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the SAIFULI BBJ120DB Explosion-Proof Sound and Light Alarm. Please read this manual thoroughly before using the product to ensure safe and correct operation.

The BBJ120DB is a robust explosion-proof strobe siren designed for industrial environments, featuring a loud 120dB alarm and a bright flashing light. It is constructed from durable aluminum alloy with an electrostatically sprayed surface for enhanced protection and aesthetics.

2. Safety Information

WARNING: Read this manual completely before use. Always ensure power is OFF before performing any installation, maintenance, or inspection procedures.

  • Ensure the product's voltage and color specifications match your requirements before installation.
  • Only qualified personnel should perform installation and wiring.
  • Do not operate the device if any damage is visible.
  • This device is explosion-proof and anti-static, but proper grounding and adherence to local electrical codes are essential.

3. Product Overview and Features

The SAIFULI BBJ120DB is an explosion-proof sound and light alarm designed for high-alert situations. Key features include:

  • Durable Construction: The shell is made of aluminum alloy by high-pressure casting, with an electrostatically sprayed surface for anti-static properties and corrosion resistance.
  • Explosion-Proof Performance: Reliable design for hazardous environments.
  • Loud Buzzer: Produces a sound level of 90dB or 120dB, depending on the model.
  • High Brightness Strobe: Provides clear visual alerts.
  • Multi-Voltage Options: Available in 12Vdc, AC/DC24V, AC/DC36V, AC110V, AC220V, and AC380V.
  • Multi-Color Options: Available in red, green, yellow, and blue.
  • Protection Level: IP54 rated for dust and water resistance.
  • Components: Features a stainless mesh cover, special glass cover, and an aluminum alloy case.
Detailed view of the alarm components: stainless mesh cover, special glass cover, and aluminum alloy case.
Figure 1: Key components of the BBJ120DB alarm.
Image showing the anti-static and electrostatically sprayed surface of the alarm.
Figure 2: The alarm's anti-static and electrostatically sprayed surface.
Close-up view of the louder speaker on the alarm.
Figure 3: Close-up of the integrated louder speaker.

4. Specifications

Attribute Specification
Brand Name SAIFULI
Model Number BBJ120DB
Volume ≥90dB / 120dB
Flash Frequency 150 times/min
Work Temperature -10 ~ 85°C
Work Humidity Below 90RH%
Input Voltage Options 12Vdc, AC/DC24V, AC/DC36V, AC110V, AC220V, AC380V
Power Frequency 50HZ
Power Consumption 90DB: 5W; 120DB: 8W
Explosion-Proof Tag EX db IIC T6 Gb / EX tb IIIC T80°C Db
Protection Level IP54
Color Options Red, Green, Yellow, Blue (Optional)
Origin Mainland China
High-Concerned Chemical None
Smart Home Platform NONE
Certification NONE
Dimensions of the larger alarm model: 18cm width, 22cm height. Available in red, green, blue, orange.
Figure 4: Dimensions for the larger alarm model (18cm x 22cm).
Dimensions of the smaller alarm model: 13cm width, 23cm height. Available in red, green, blue, orange.
Figure 5: Dimensions for the smaller alarm model (13cm x 23cm).
Mounting holder dimensions: 16cm base, 12cm top, 15.5cm height, with various screw hole placements.
Figure 6: Mounting holder dimensions.
Installation size diagram showing a circular base with three mounting points forming an equilateral triangle with 105mm sides and a 100mm diameter.
Figure 7: Installation hole pattern and dimensions.

5. Setup and Installation

The BBJ120DB alarm can be installed as a desktop unit, wall-mounted, or ceiling-mounted. Follow these steps for proper installation:

  1. Check Compatibility: Verify that the alarm's voltage and color specifications are compatible with your existing system and requirements.
  2. Prepare for Wiring: Ensure all power to the installation area is turned OFF.
  3. Access Wiring Compartment: Open the metal mesh cover and carefully remove the glass case to access the internal wiring terminal block.
  4. Route Cables: Insert the power wire through the designated cable hole on the side of the casing.
  5. Connect Wiring: Connect the power cables to the terminal block using a screwdriver. Refer to Figure 8 for visual guidance on cable connection.
  6. Secure Components: Replace the glass case and metal mesh cover, ensuring they are securely fastened.
  7. Mount the Device: Fix the equipment in the desired installation position using appropriate mounting hardware (refer to Figures 6 and 7 for mounting dimensions).
  8. Test Operation: Once securely installed and wired, restore power and test the alarm's functionality.
Internal view of the alarm showing the wiring terminal block.
Figure 8: Internal wiring terminal block.
Four-panel image demonstrating cable connection steps: 1. Open case, 2. Release screw, 3. Link power, 4. Cable hole.
Figure 9: Step-by-step guide for connecting the power cable.

6. Operating Instructions

The SAIFULI BBJ120DB alarm is designed for straightforward operation. Once properly installed and powered, the alarm will activate its sound and light functions when triggered by the connected system (e.g., a control panel, sensor). The strobe light will flash at approximately 150 times per minute, and the buzzer will emit a loud sound of 90dB or 120dB, depending on the model.

To demonstrate the alarm's operation, please refer to the video below:

Video 1: Demonstration of the BBJ120DB alarm's sound and light output, showing a sound level meter reading 126.3dB.

7. Maintenance

  • Regular Inspection: Periodically inspect the alarm for any signs of physical damage, loose connections, or corrosion.
  • Cleaning: Keep the exterior of the alarm clean from dust and debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Glass Cover: Ensure the glass cover is clean and free from obstructions to maintain optimal light visibility.
  • Power Off for Maintenance: Always disconnect power to the unit before performing any maintenance or cleaning.
  • Seal Integrity: Verify that all seals and covers are properly secured to maintain the IP54 protection level.

8. Troubleshooting

  • Alarm Not Activating:
    • Check power supply connections.
    • Verify the input voltage matches the alarm's specification.
    • Ensure the triggering mechanism (e.g., sensor, control panel) is functioning correctly.
  • Light Not Flashing:
    • Check for power supply issues.
    • Inspect the light bulb/LED for damage (if user-replaceable, consult a professional).
  • Sound Not Emitting:
    • Check for power supply issues.
    • Ensure the speaker grille is not obstructed.
  • Intermittent Operation:
    • Inspect all wiring connections for looseness or corrosion.
    • Ensure the operating temperature and humidity are within specified ranges.

For complex issues, it is recommended to consult a qualified electrician or the manufacturer's support.

9. User Tips

  • Voltage Selection: When ordering, carefully select the correct voltage (12V, 24V, 36V, 110V, 220V, or 380V) to match your application's power supply.
  • Color Choice: Consider the environment and desired visibility when choosing the alarm color (red, green, yellow, blue). Red is typically used for immediate danger, while other colors might indicate different alert levels.
  • Mounting Stability: Ensure the alarm is mounted on a stable surface using appropriate fasteners to prevent vibration and ensure long-term reliability.

10. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation. A user manual in PDF format is available for download, which may contain additional diagrams and troubleshooting steps:

View User Manual (PDF)

For further assistance, please contact your vendor or the manufacturer directly.

© 2024 SAIFULI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.