1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Chevolink DS-1081ZC Zigbee Smart Light Switch. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Figure 1: Chevolink Zigbee Smart Light Switch overview, highlighting compatibility with Tuya, Zigbee, Amazon Alexa, and Google Home.
2. Setup and Installation
2.1. Notes Before Installation
- Zigbee Frequency: 2.4GHz
- Zigbee Standard: IEEE 802.15.4
- Supports one-way/single pole circuit only, not compatible with 2-way switches.
- Available for installations with or without a neutral wire.
- This product does not have a relay function.
- Basic electrical wiring knowledge or experience is required. If unsure, please consult a professional electrician.
- The ON/OFF button can also be used as a reset button. Long press any key for 10 seconds to reset your smart switch to factory defaults. Only perform this if you are sure you want to erase all your settings.
2.2. Wiring Diagrams
Please select the wiring method according to your actual electrical setup. Always disconnect the power supply before performing any wiring work.

Figure 2: Universal wiring diagram showing connections for both 'Need Neutral' and 'NO Need Neutral' setups.
2.2.1. Wiring with Neutral Wire (EU & US)
- Live Wire connects to the 'L' terminal.
- Bulb Wire connects to the 'L1', 'L2', 'L3', 'L4' terminals (depending on the number of gangs).
- Neutral Wire connects to the 'N' terminal.
- For a single-gang switch, connect to 'L1' terminal.
- For a two-gang switch, connect to 'L1', 'L2' terminals.
- For a three-gang switch, connect to 'L1', 'L2', 'L3' terminals.
- For a four-gang switch, connect to 'L1', 'L2', 'L3', 'L4' terminals.
2.2.2. Wiring Without Neutral Wire (EU & US)
If there is no neutral wire available, a capacitor must be connected in parallel with the bulb.
- Live Wire connects to the 'L' terminal.
- Bulb Wire connects to the 'L1', 'L2', 'L3', 'L4' terminals (depending on the number of gangs).
- A capacitor must be connected between the 'L1'/'L2'/'L3'/'L4' terminal and the neutral wire of the bulb circuit.
- For a single-gang switch, connect to 'L1' terminal.
- For a two-gang switch, connect to 'L1', 'L2' terminals.
- For a three-gang switch, connect to 'L1', 'L2', 'L3' terminals.
- For a four-gang switch, connect to 'L1', 'L2', 'L3', 'L4' terminals.
2.3. App Download and Registration
- Download App: Scan the QR code below or search for "Smart Life" in your mobile app store (iOS App Store or Google Play Store).
- Register and Login: Open the Smart Life App. Follow the on-screen prompts to register an account using your phone number or email. Create a "Family" within the app by entering a family name and selecting rooms.
2.4. Connecting to Smart Gateway (Hub)

Figure 3: System overview showing the Smart Zigbee Switch connected via a Gateway (Hub) to a WiFi Router, enabling APP and Voice control.
- Open the Smart Life application and click "Add Device".
- Find your Zigbee Gateway (Hub) in the "Gateway Central Control" column.
- Reset your gateway device by long-pressing its reset button until the indicator light (green light) is continuously on.
- In the app, confirm that the two green lights are on, then click "Next". Ensure your mobile phone and gateway are on the same Wi-Fi network.
- Once the device is successfully added, click "Done".
2.5. Connecting the Smart Switch to the Gateway/App
- Ensure the smart switch is powered on. Press any switch button for 10 seconds until the Wi-Fi red light flashes rapidly.
- After the smart gateway is connected to the app, click "Add sub-device" and then click "LED already blinking".
- The device will connect automatically. Click "Done" to complete the connection.
3. Operating Instructions
3.1. Functional Features
- Ultra-low Power Consumption: The power consumption of the switch itself is less than 0.05W.
- Timing Function: The switch has a timing function, which can be set to open or close at a certain time.
- Power-on State Setting: You can configure the switch's behavior after a power outage: always off, always on, or power-off memory (remembers the state before power loss).
- Indicator Light Control: You can turn off the indicator light, have it indicate the switch's state (on/off), or have it indicate the switch's position.
- Multi-control Correlation: Allows for advanced smart home scenarios.
- Intelligent Voice Speaker Control: Compatible with smart speakers like Amazon Alexa and Google Home.
3.2. Smart Speaker Voice Control
Once connected to your Zigbee gateway and integrated with your smart home platform (Tuya Smart Life), you can control the switch using voice commands through compatible smart speakers.

Figure 4: Examples of voice commands for Amazon Alexa ("Alexa, Turn on the lights.") and Google Home ("Google, Turn on the lights.").
4. Maintenance
To maintain your smart switch, simply wipe it with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Ensure the switch is kept dry and away from excessive moisture.
5. Troubleshooting
- Bulb Flickering, Dimming, or Unstable Switch: If your bulb flashes, dims, or the switch behaves unstably, first try to connect a neutral wire. If a neutral wire is not available, connect a capacitor in parallel with the neutral wire and the live wire of the bulb.
- Bulb Power Less Than 3W: When using the switch with bulbs less than 3W, ensure that the output is connected to the bulb. For single-fire switches, the driving energy is provided by the bulb; higher bulb power provides more energy.
- Bulbs Remaining Slightly Bright: Some high-voltage LED strip lamps, LED bulbs, or ceiling lights may remain slightly bright even when off if they lack a driver or capacitor. The capacitor solution mentioned above may help.
- Switch Not Responding: Check power supply, Wi-Fi connection, and Zigbee gateway status. Ensure the switch is properly paired with the gateway. Try resetting the switch (long press any button for 10 seconds) and re-pairing.
6. Specifications

Figure 5: Detailed product dimensions and back panel view showing terminal labels and electrical specifications.
| Feature | Specification |
|---|---|
| Model Number | DS-1081ZC |
| Voltage | AC100-240V, 50/60Hz |
| Max. Load | 3-600W/gang |
| Current | 10A |
| Wireless Type | Zigbee |
| Switch Type | APP Control |
| Material | Plastic |
| Is Smart Device | Yes |
| Origin | Mainland China |
| Certifications | RoHS, FCC, CE |
| Dimensions (Front) | 8.6cm x 8.6cm (3.39 inch x 3.39 inch) |
| Dimensions (Back Module) | 4.95cm x 4.95cm (1.95 inch x 1.95 inch) |
| Depth (Total) | 3.9cm (1.54 inch) |
| Depth (Front Plate) | 1.1cm (0.43 inch) |
7. User Tips
- Zigbee Hub Compatibility: Ensure your Zigbee gateway (hub) is compatible with Tuya Smart Life and supports standard Zigbee protocols for seamless integration.
- Network Stability: For optimal performance, ensure your Wi-Fi network is stable and your Zigbee gateway is within a reasonable range of both your router and the smart switch.
8. Warranty and Support
This Chevolink DS-1081ZC Smart Light Switch comes with a 1-year warranty from the date of purchase. For warranty claims, technical support, or any questions not covered in this manual, please contact your seller or the manufacturer's customer service.
For a more detailed user guide and additional information, you may refer to the official PDF manual available at: User Manual (PDF)