KALADA 050226

Contents

KALADA Dual Zone Symphony LED Car Ambient Light User Manual

Model: 050226

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KALADA Dual Zone Symphony LED Car Ambient Light. This product is designed to enhance your car's interior with dynamic and customizable lighting effects, offering both single and dual-zone color control, music synchronization, and a wide range of colors.

2. Important Safety Information

Please read all instructions carefully before using this product. Failure to follow these instructions may result in product damage or personal injury.

  • WARNING: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • California Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Package Contents

The package includes the following components, depending on the chosen item type:

  • 1x Main Controller Module
  • 4x Sub-Controller Modules (except for 75cm strip only option)
  • LED Light Strips (various lengths: 75cm, 110cm, 35cm)
  • Additional lights based on chosen package type:
    • 6 in 1 Symphony: 6 LED strips (75cm*4 + 35cm*1 + 110cm*1)
    • 10 in 1 Symphony: 6 LED strips + 4 Footlights
    • 14 in 1 Symphony: 6 LED strips + 4 Footlights + 4 Door Bowl Lights
    • 18 in 1 Symphony: 6 LED strips + 4 Footlights + 4 Door Bowl Lights + 4 Storage Lights
    • 22 in 1 Symphony: 6 LED strips + 4 Footlights + 4 Door Bowl Lights + 4 Storage Lights + 4 Speaker Lights
    • 1pcs 75cm strip: (Requires main controller or sub-controller to light up, sold separately or as part of a kit)
Diagram showing the components included in the LED car ambient light kit, including light strips, main controller, sub-controllers, and various light ports.
Figure 1: Kit Components and Connection Diagram. Shows main controller, sub-controller, light strips (75cm, 110cm, 35cm), and ports for storage, footlight, and door lights.

4. Specifications

Attribute Value
Brand Name KALADA
Model Name LED Ambient light (Model 050226)
Item Type Atmosphere lamp
Voltage 5V - 14V (Compatible with all 12V car makers)
Material Acrylic
Special Features Dual zone lights, Symphony and 64 colors
Certification CE
Item Diameter 43.3 (Unit not specified)
Item Weight 0.9 (Unit not specified)
Origin Mainland China
Package Dimensions (approx.) Length: 29cm, Width: 24cm, Height: 10cm
Package Weight (approx.) 0.834 kg
Close-up of the LED lamp beads material, showing its flexibility and ability to be bent arbitrarily.
Figure 2: The LED lamp bead material is highly flexible and can be bent arbitrarily for installation.

5. Setup and Installation

Proper installation is crucial for optimal performance. Please follow these steps carefully.

5.1. Preparations Before Installation

  1. Distinguish Modules: The module with a QR Code is the main control. It projects signals and synchronously controls all sub-modules. The other modules are sub-modules, which receive instructions from the main module for color changes.
  2. Power On Sequence: The main module must be powered on first for sub-modules to light up.
  3. App Download: Scan the QR code on the main control box to download the application. Bluetooth will connect automatically (Android systems may require position function to be turned on).
  4. Product Test: After receiving the product, connect it to the car battery (do not use an external power supply) to test functionality before proceeding with full installation.
  5. Initial Connection: Plug all LED lights into their respective controllers FIRST before powering the controllers.

5.2. Wiring the Main Module (Central Console/Footlight)

  1. Positive Connection: Connect the main controller's red power cable to an ACC fuse positive terminal (recommend adding a 5A-15A fuse from the original fuse current). Be mindful of sensor interfaces.
  2. Negative Connection: Connect the main controller's black power cable to any ground metal point on the car body.
  3. Note: Automatic headlights, console GPS, and DVD wiring are generally not suitable for power connection.

5.3. Wiring the Sub-Modules (Door Panel)

Sub-controller power connects to the door's constant power supply.

Determining Door Power Type (ACC or Constant Power):

  • Constant Power (e.g., German cars):
    1. Ignite the car before testing positive and negative poles.
    2. Find a positive pole with 6-18V available, choosing a thick wire.
    3. Find a negative pole (avoid using door iron or screws for negative power).
    4. Connect the sub-control module to the found power supply. Test the window lifter and check if the ambient light works normally when the window moves up and down. Keep testing for about 5 minutes in white color mode.
    5. If the ambient light flashes or goes off, the power supply is unstable. Find workable positive wires again.
  • ACC Power (e.g., Japanese & Korean cars):
    1. The door function is not available until the car is ignited.
    2. Ignite the car before testing positive and negative poles.
    3. Find a positive pole with 6-18V available, choosing a thick wire.
    4. Find a negative pole (avoid using door iron or screws for negative power).
    5. Connect the sub-control module to the found power supply. Test the window lifter and check if the ambient light works normally when the window moves up and down. Keep testing for about 5 minutes in white color mode.
    6. If the ambient light flashes or goes off, the power supply is unstable. If the ambient light goes off, first determine the positive/negative pole problem and find workable positive wires again.

5.4. Light Strip Installation Steps

Central Console:

  1. Remove the trim panel of the center console.
  2. Thread the light strip wires through the holes of the trim panel and connect to the main module.
  3. Secure the light strip to the trim board with 3M tape and cut off any excess strip.
  4. Install the trim panel along with the light strip back onto the center console.

Door Panel (for sub-modules):

  1. Remove the door panel.
  2. Remove the screws of the door trim panel and then remove the trim panel.
  3. Run the acrylic light strip from the back of the door panel through the hole in the trim panel to the front.
  4. Fasten the light strip to the decorative board with 3M tape.
  5. Install the trim panel along with the light strip back onto the door panel.
  6. Connect the light strip wires on the back of the door panel to the sub-module.
  7. Install the door panel.

5.5. Final Test After Installation

  1. After the entire vehicle is installed, turn all the lights to white color mode and keep testing for 5-10 minutes.
  2. Operate the window lifters and observe whether the ambient light goes off or flashes.
  3. Ensure there are no issues before fully reassembling the door.
Video 1: Demonstration of the car ambient lighting in action, showcasing various color changes and dynamic effects within the vehicle interior.

6. Operation

Your ambient light system offers versatile control options and dynamic lighting modes.

6.1. Control Methods

  • Double Button Mode: Control the lights directly using physical buttons on the main controller.
  • Mobile Phone APP Control: Connect via Bluetooth to the dedicated mobile application for comprehensive control.
Screenshots of the mobile application interface for controlling the LED ambient lights, showing DIY color selection, multiple modes, home page, music mode, and microphone settings.
Figure 3: Mobile Application Interface for Bluetooth Control. Features DIY color selection, multiple modes, home page, music mode, and microphone settings.
Car interior illuminated with colorful LED ambient lights, with a smartphone displaying the control app. Music notes are overlaid on the image.
Figure 4: Mobile App Control in a Car Interior. Shows the app controlling the colorful ambient lighting.

6.2. Lighting Modes and Features

  • Monochrome Mode: Display a single, solid color.
  • Breathe Mode: Lights gently fade in and out.
  • Gradient Mode: Colors smoothly transition from one to another.
  • Cycle Mode: Lights cycle through a predefined sequence of colors.
  • Strobe Mode: Lights flash rapidly.
  • Music Rhythm Mode (Active Sound Effects): The LED system is equipped with sound sensors that synchronize the lights with musical rhythm. The lights will follow the beat and adjust their flicker to the strength of the sound, creating a dynamic musical decoration.
  • Flow Mode: Lights create a flowing, continuous movement effect.
  • Running Water Mode: Lights simulate a running water effect.
  • Dual Zone Mode: In this mode, the light bar and footlight/door light/storage light can display two different colors simultaneously, adding depth to your car's interior ambiance.
  • Brightness & Color Temperature Adjustment: Adjust the brightness levels (e.g., 10%, 30%, 70%, 100%) to suit your preference.
Examples of Single Zone Mode lighting in a car interior, showing various solid colors like red, green, purple, blue, and white.
Figure 5: Single Zone Mode examples, where all lamps uniformly change to the same color and mode.
Diagram showing adjustable brightness levels for the car ambient lights at 10%, 30%, 70%, and 100% intensity, with corresponding visual effects.
Figure 6: Adjustable brightness levels for soft and non-dazzling illumination.
Examples of Two-color/Multi-color mode lighting in a car interior, showing different color combinations and modes simultaneously.
Figure 7: Two-color/Multi-color mode examples, where all lights change to different colors and modes.

7. Maintenance

To ensure the longevity and proper functioning of your LED ambient light system:

  • After use, turn off the device.
  • Store the device in a dry place.
  • Keep away from children.
  • Clean the light strips and controllers with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.

8. Troubleshooting

If you encounter issues with your ambient light system, refer to the following common problems and solutions:

  • Lights not working or flashing:
    • First, remove the kit and connect it directly to the car battery to test.
    • If the ambient light works normally when connected directly, the issue is likely an installation error. Recheck all wiring connections, especially for correct polarity and stable power supply.
    • If the ambient light still does not work normally when connected directly to the battery, it may indicate a product fault.
  • App connection issues: Ensure Bluetooth is enabled on your mobile device and the app has necessary permissions (e.g., location for Android). If problems persist, try restarting the app and the main controller.
  • Uncertain about specific wire connections (e.g., yellow wire): Always refer to the detailed wiring diagrams provided in the full user manual (PDF) and ensure all connections match your car's electrical system. Incorrect wiring can cause damage.

9. User Tips

  • Pre-installation Test: Always perform a quick test by connecting the lights directly to the car battery before full installation to confirm functionality.
  • Wiring Clarity: Pay close attention to the wiring diagrams, especially for the main and sub-controllers. Many users inquire about specific wire functions (like the yellow cable), so double-check all connections and ensure correct positive and negative polarity.
  • App Control: The mobile app offers extensive customization. Take time to explore the DIY color selection, various modes, and music synchronization features for the best experience.
  • Flexibility: The LED strips are designed to be flexible, allowing for arbitrary bending to fit various contours of your car's interior.

10. Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Certification: CE

11. Warranty and Support

This product comes with a 12-month warranty for parts replacement.

For detailed guides and further assistance, please refer to the official user manual PDF available at: User Manual (PDF).

Manufacturer Information:

  • Company Name: Guangzhou Pengzhan Optoelectronics Technology Co., Ltd.
  • Address: Room 201, 2nd Floor, Huanbao Industrial Park, No. 1-2, Huanbao 2nd Road, Xintang Town, Zengcheng District, Guangzhou, China
  • Email: 690856574@qq.com
  • Telephone: 86-13416319300

EU Authorized Representative:

  • Company Name: MJCM SARL
  • Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR
  • Email: mjcm190928@gmail.com
  • Telephone: 0033 752907452

© 2024 KALADA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.