CARABC Wireless Carplay Android Auto

Contents

CARABC Wireless Carplay & Android Auto Instruction Manual

For Porsche PCM3.1 (Panamera, Cayenne, Cayman, Macan, Boxster, 911, 991, 718 models, 2010-2016)

1. Overview

The CARABC Wireless Carplay & Android Auto system enhances your driving experience by integrating smartphone functionalities directly into your Porsche's PCM3.1 infotainment system. This module supports both wireless Apple CarPlay and Android Auto, along with screen mirroring and USB media playback. It is designed for seamless integration, utilizing the original car's controls and display.

Key features include:

  • Support for Wireless Carplay, Carlife, and Android Auto.
  • Wireless phone-link functionality.
  • High-performance Linux system with Sunplus SPHE8368-U chip (800MHz), 128MB RAM, and 128MB SLC NAND FLASH.
  • Ultra-high integration with a compact size (60*39*6mm).
  • Supports multi-format video output (Analog CVBS, LVDS HD, Digital RGB888).
  • Two-channel CD stereophonic sound output.
  • Retains original car's operating system and MIC for high sound quality and echo control.
  • Smooth playback of 1080P multi-format video (including H.264).
  • USB-HOST connectivity.
  • UART connector for touch screen and button operation.
  • Supports extended reverse video input, AHD HD input, front view, and DVR applications.
CARABC Wireless Carplay Android Auto module with free tools and features like Carplay, Android Auto, Mirroring, Navigation. Compatible with Porsche PCM3.1 models 2010-2016.

Image: CARABC Wireless Carplay Android Auto module highlighting key features and compatibility.

2. Compatibility

This system is compatible with Porsche vehicles equipped with the PCM3.1 infotainment system, manufactured between 2010 and 2016. Please verify your vehicle's system type before installation.

Compatible Model List (PCM3.1)
SystemYearsApplied To
PCM3.12010-2016Cayenne, Macan, Cayman, Panamera, Boxster, 911, 991, 718

Important Note:

  • Applicable to PCM3.1 host with NAVI function.
  • NOT applicable to CDR host (CD-AUX only).
Image showing the difference between NAVI and CD-AUX interfaces in Porsche PCM3.1, indicating compatibility with NAVI and incompatibility with CD-AUX.

Image: Visual guide for PCM3.1 compatibility, distinguishing between NAVI (compatible) and CD-AUX (not compatible) interfaces.

3. Package Contents

Please check the package contents against the list below to ensure all components are present:

  • Main PCB module
  • Power cable
  • RCA/USB cable
  • Data cable
  • BT & WIFI Antenna
  • Microphone cable
  • FPC (Flexible Printed Circuit) cables
Image showing the main PCB module and all included accessories: Power cable, RCA/USB cable, Data cable, BT & WIFI Antenna, Microphone cable, and FPC cables.

Image: Product Information and Accessories List, showing the main module dimensions and all included cables and antennas.

4. Installation

This section provides detailed instructions for installing the CARABC Wireless Carplay & Android Auto module. Professional installation is recommended.

4.1 Wiring Diagram Overview

The module connects to the OEM head unit and various external components. Refer to the diagram for proper connections.

Detailed wiring diagram for the CARABC Wireless Carplay Android Auto module, showing connections to OEM head unit, power, USB, cameras, and audio.

Image: General product installation diagram, illustrating connections to the OEM head unit, phone/USB stick, and various camera inputs.

4.2 FPC Connection and LCD Module Installation

The FPC (Flexible Printed Circuit) cables connect the LCD module to the main PCBA of the OEM head unit. Ensure secure connections.

Diagram showing the connection of the LCD module to the head unit chassis and the video interface PCBA using FPC cables, along with how to switch between OEM UI and Add-on UI.

Image: Detailed FPC connection and LCD module installation, including how to switch between OEM UI and Add-on UI using the 'INFO' button.

4.3 DB Connection for Porsche PCM3.1

Refer to the specific DB connection diagram for Porsche PCM3.1 split board small board connection.

Detailed DB connection diagram for Porsche PCM3.1, showing connections for USB expansion, front/reverse camera inputs, CAN 12V, BATT+, GND, and audio outputs.

Image: Specific DB connection diagram for Porsche PCM3.1, detailing USB, camera, power, and audio connections.

Key Connections:

  • USB Expansion: Connect USB flash disk, mobile phone for software updates.
  • FRONT-CVBS: Front video input port.
  • REVER-CVBS: Reversing video input port.
  • CAN 12V: Power for camera.
  • REVERSE: Reverse detect (connect to reversing light if camera 12V out does not output when shifting to R gear).
  • BATT+: Battery positive.
  • GND: Ground.
  • Audio Output: Connect to the corresponding port of the CD host of the original vehicle.
  • Speaker: Connect to loudspeaker.
  • Extra Mic: Port for an additional microphone.

Fiber Optic Cable Transfer: Transfer the original fiber optic cable from its current position to the corresponding connector on the new module as indicated in the diagrams.

5. Initial Setup: First Connection Operation

5.1 Wireless Apple CarPlay Connection (Manual Method)

  1. Enter the CARPLAY menu interface (P1).
  2. Click 'Settings' then 'Discover and connect devices'.
  3. A pop-up window will appear (P2) showing the device's Bluetooth name (e.g., CX BTFC4BBC1A1D94).
  4. On your Apple mobile phone, open Bluetooth settings and search for the device name (P3).
  5. Click on the device name to initiate pairing (P4).
  6. Confirm the connection pairing.
  7. Once paired, click 'Use CarPlay' to enter the CarPlay interface (P5).

NOTE:

  • Your Apple phone must be fully matched with Bluetooth.
  • The mobile phone will finish the wireless CarPlay connection when Wi-Fi is enabled.
  • CarPlay will connect automatically next time.
  • For an easy first connection, connect via USB wired method first. The mobile phone will enable wireless CarPlay according to instructions. After 15 seconds, disconnect the data cable, and wireless CarPlay will automatically connect.
Video preview of Carplay in action on a Porsche infotainment system.

Video: Demonstration of Wireless Carplay functionality within a Porsche vehicle.

5.2 Wireless Android Auto Connection (Manual Method)

  1. Enter the installation Settings interface, then navigate to 'Wireless Android Auto Settings' (P1).
  2. Click on the option to pair with the device (e.g., CX-BT...) (P2).
  3. Use your Android mobile phone's Bluetooth to connect to the device.
  4. After successful pairing, the auto interface will appear (P3).
  5. Upon entering this interface, wireless Android Auto is successfully connected.

NOTE:

  • For an easy first connection, connect via USB wired method first. The mobile phone will enable wireless CarPlay (or Android Auto) according to instructions. After 15 seconds, disconnect the data cable, and wireless Carplay/Android Auto will automatically connect.

6. Operation

6.1 Original Car Button & Dip Switch Explained

The system integrates with your car's existing controls for ease of use.

Steering Wheel Controls:

  • Call Buttons: Use to make and receive calls.
  • Long Press (3 seconds): Switches between the original car system and the module's system.
  • Short Press (Hang Up): Ends a call.
  • Long Press (Siri): Activates Siri.

Console Controls:

  • Audio Channel Switching: Function button for audio source selection.
  • Phone Answering/Hang Up: Dedicated buttons for calls.
  • 'INFO' Button (Long Press 10 seconds): System forced upgrade or recovery.
  • Volume Knob: Rotate left/right to adjust volume. Press and hold for 10 seconds to recover the system.
  • Next Song: Button for track skipping.
  • Left and Right Rotation: Function operation for navigation or menu scrolling.

6.2 Function Operation Description

The system offers a variety of functions accessible through the interface.

Image showing various product functions: Navigation, Siri Control, Screen Mirroring, Phone Call, Online Music Play, and USB Flash Play.

Image: Overview of product functions including Navigation, Siri, Screen Mirroring, Phone Calls, and Music Playback.

  • Wired/Wireless Carplay & Android Auto: Full integration of smartphone features.
  • Screen Mirroring: Display your phone's screen (Apple, Android) on the car's display.
  • USB Multimedia Playback: Supports lossless audio, 720P video, and picture playback.
  • Rear View Video Input: Supports original car's rear-viewing camera, after-sale rear-viewing camera (CVBS/AHD), front-viewing camera (can be set up), or DVR.
  • 360 Panorama Expansion: Support for expanding to after-sale 360 panorama (CVBS/AHD).
  • Audio EQ Adjustment: Music and navigation volume can be adjusted separately.
  • Original Car MIC Support: Utilizes the original car's microphone with automatic correction for calling.
  • Original Bluetooth Call Function: Retains the car's native Bluetooth call functionality.
  • AUX In Function: Can expand digital TV.
  • Wired Baidu CarLife: (Requires activation in factory settings, password: 0301).
Image showing a car's infotainment screen displaying a rear view camera feed with parking guidelines.

Image: Support for rear view video input (CVBS signal input).

6.3 Screen Mirroring

To use screen mirroring, ensure wireless Carplay or Auto connection is disconnected.

  1. Click the 'Mirroring' icon on the interface.
  2. Connect your Apple mobile phone via USB cable. The phone will prompt for connection.
  3. For Android phones, insert the USB cable. An

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.