1. Introduction
Thank you for choosing the PZSUNLY Motion Sensor LED Night Light. This versatile, wireless, and USB rechargeable light is designed to provide convenient illumination in various areas of your home. Its intelligent motion sensor activates the light automatically in dark environments, enhancing safety and comfort.
This manual provides essential information for the safe and efficient use of your night light. Please read it thoroughly before installation and operation.
2. Package Contents
- Motion Sensor LED Night Light(s)
- USB Charging Cable
- Magnetic Sheet(s) with 3M Adhesive
3. Setup and Installation
3.1 Charging the Device
Before first use, fully charge the night light. Use the provided USB charging cable and connect it to a standard 5V mobile phone charger or computer USB port.
- Red Indicator Light: The device is currently charging.
- Green Indicator Light: The device is fully charged.

Image: USB charging cable connected to the night light.
3.2 Mounting the Night Light
The night light is designed for easy, wiring-free installation. It can be widely used in bedrooms, wardrobes, cabinets, stairs, balconies, and other spaces.
- Identify a suitable location for the night light.
- The base of the product has a built-in magnet, allowing it to be directly adsorbed onto any iron surface.
- For non-metallic surfaces, use the provided magnetic sheet with 3M adhesive. Peel off the protective film from one side of the 3M adhesive and firmly press it onto your desired surface. Then, attach the night light magnetically to the installed sheet.

Image: Multiple LED motion sensor lights demonstrating their compact design.
4. Operating Instructions
4.1 Motion Sensor Functionality
The night light features an intelligent PIR (Passive Infrared) motion sensor that operates automatically in dark environments.
- Automatic Activation: When the environment is bright, the night light will remain off. In dark conditions, if motion is detected within a range of 0 to 6 meters and a 120° angle, the light will automatically turn on.
- Automatic Deactivation: The light will turn off automatically after approximately 15-30 seconds of no detected motion.

Image: Diagram illustrating the motion sensor's detection range of 3 meters and 120-degree angle, with a 25-second induction lighting time and 15-second auto-off after inactivity.

Image: Motion sensor light installed on stairs, showing a detection range of 3-5 meters and 120-degree angle, with auto-on in the dark and auto-off after 30 seconds.
4.2 Light Mode Control (Tricolor Sensor)
The night light offers multiple lighting modes, which can be cycled through by pressing the control button:
- First Press: Activates Cold White Light (motion sensor mode).
- Second Press: Activates Warm White Light (motion sensor mode).
- Third Press: Activates Neutral Light (motion sensor mode).
- Fourth Press: Turns the light off.
To activate a continuous