LEXXSON Becker upgrade box

Contents

LEXXSON Wireless CarPlay & Android Auto Upgrade Module for Mercedes-Benz NTG4.5 Systems

User Manual

1. Safety Instructions

To avoid risk of serious injury or possible violation of laws, please read the following thoroughly before installation or connecting.

  • Be sure to use specified accessory parts and install them securely.
  • Do not damage wiring. Failure to do so may result in electric shock or fire due to electrical shorts.
  • Do not install in locations with high moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

2. Product Description

This upgrade kit is specifically designed for the Mercedes-Benz NTG 4.5 System. It addresses the inconvenience of not having CarPlay and Android Auto in your car. This kit allows Mercedes-Benz owners to use the CarPlay system without replacing the car radio, transforming your car radio from a "single function" to a "multi-function" device. It features wireless CarPlay and wireless Android Auto, which maintain your usage habits and connect automatically when you get in the car. The module also includes a Mirroring function and camera mode, enhancing driving safety and convenience.

3. Product List

The package includes the main module and the necessary wiring harness for installation.

LEXXSON CarPlay Module and Wiring Harness
Image: LEXXSON CarPlay Module and Wiring Harness

4. Setup

4.1. Compatibility Check

This upgrade kit is suitable for Mercedes-Benz vehicles with the NTG4.5 system. To determine if your Mercedes (2011-2015 models) has NTG4.5 or NTG4.7, check for a HARMAN BECKER slot in the glove box on the passenger side. NTG4.5 systems have this slot, while NTG4.7 systems do not.

Mercedes-Benz NTG4.5 System Identification
Image: Identifying NTG4.5 system by HARMAN BECKER slot and LVDS port.

4.2. Module Installation

The module is designed for plug-and-play installation. Simply align and plug the module into the HARMAN-BECKER socket.

Module Installation into HARMAN-BECKER socket
Image: Aligning and plugging the module into the HARMAN-BECKER socket.

4.3. Connection Diagram

Refer to the diagram below for connecting the module to your vehicle's system and external devices.

Connection Diagram for CarPlay Module
Image: Detailed connection diagram for the CarPlay module.
  1. USB: Connect to mobile phone for data transfer and software upgrades.
  2. AUX: Connect to the original car AUX input.
  3. Reversing video input: For connecting an aftermarket rear view camera.
  4. CAN-H
  5. CCD 12V
  6. CAN-L
  7. BACK

5. Operating Instructions

5.1. Initial Bluetooth Connection (Mandatory)

Before using any wired or wireless connection for CarPlay or Android Auto, you must first connect your phone to the car's MB Bluetooth.

  1. Turn on Bluetooth audio on your car's stereo and select "Connect via BT audio device".
  2. Pair your phone's Bluetooth with the car's MB Bluetooth.
Bluetooth Pairing Steps
Image: Steps for pairing your phone with the car's MB Bluetooth.

5.2. Accessing the Becker Interface

Press the "NAVI" button on your car's console to enter the Becker interface.

Becker Interface Navigation
Image: Pressing the NAVI button to access the Becker interface.

5.3. Enabling Auto Connect

Within the Becker interface, click the "Bluetooth" icon and select "Auto Connect" to ensure seamless future connections.

Bluetooth Auto Connect Setting
Image: Setting Bluetooth to Auto Connect within the Becker interface.

5.4. Wireless CarPlay Connection

  1. Ensure your iPhone's Wi-Fi and Bluetooth are turned on.
  2. In the Becker interface, click the CarPlay icon.
  3. On your iPhone, pair to the Bluetooth device named "BK-xxxx" (where xxxx is a unique identifier).
  4. Allow all requested permissions on your iPhone.
  5. Click "Use CarPlay" when prompted. Your phone will connect to wireless CarPlay after a few seconds.

5.5. Wireless Android Auto Connection

  1. Ensure your Android phone's Wi-Fi and Bluetooth are turned on.
  2. On your Android phone, pair to the Bluetooth device named "BK-xxxx".
  3. Tap "Pair-Allow" on any pop-up notifications on your Android phone. Your phone will connect to wireless Android Auto after a few seconds.
Wireless CarPlay and Android Auto Connection Steps
Image: Visual guide for connecting Wireless CarPlay and Android Auto.

5.6. Wired CarPlay & Android Auto Connection

After ensuring your phone is paired with the car's MB Bluetooth, plug your phone's data cable into the USB port on the Becker box. The system will automatically enter the corresponding mobile phone interconnection method (CarPlay or Android Auto).

Wired CarPlay and Android Auto Connection
Image: Diagram showing wired connection for CarPlay and Android Auto.

5.7. Steering Wheel Button Control

The module supports control via your vehicle's steering wheel buttons:

  • Siri voice control
  • Volume up/down
  • Short press to answer calls
  • Short press to hang up calls
Steering Wheel Button Functions
Image: Steering wheel buttons highlighted for control functions.

6. Rear View Camera Integration

The Becker box supports the installation of CVBS format aftermarket rear view cameras. If your car already has a factory-installed rear view camera, this module cannot add to or replace its functionality.

Rear View Camera Wiring Diagram
Image: Wiring diagram for connecting an aftermarket rear view camera.

7. Specifications

Feature Specification
Operating Voltage 5V
Operating Temperature -30°C to +75°C
Stored Temperature -30°C to +85°C
Environment Humidity ≤98% (at 45°C), 65±5% (rated)
Power Consumption 1A (rated), 3A (Max)
Shutdown Current 300mA (Clock is on)
Quiescent Current Less than 3mA
Charging Current ≤2A. If USB charging current > 1A, the unit activates circuit protection to control current below 1.5A to prevent product damage.

8. User Tips

  • Ensure your phone's operating system is iOS 10 or Newer for CarPlay, and Android 11 or Newer for Android Auto, to ensure full wireless functionality.
  • Always establish the Bluetooth connection with your car's MB Bluetooth first before attempting to connect via wired or wireless CarPlay/Android Auto. This is a crucial first step for proper operation.
  • For optimal performance, keep your phone's Wi-Fi and Bluetooth enabled when using wireless CarPlay or Android Auto.

9. Troubleshooting

9.1. CarPlay/Android Auto Works But No Sound

If CarPlay or Android Auto is functioning visually but you hear no sound:

  1. Check if the Bluetooth connection between your phone and the car's MB Bluetooth is still active.
  2. Verify the audio source selected on your phone.
  3. Ensure the car's audio input is set to AUX.
  4. If necessary, switch the audio output on your phone to "MB Bluetooth" and disconnect any other Bluetooth devices that might be interfering with the connection.

9.2. Cannot Enter CarPlay/Android Auto Interface After Bluetooth Pairing

If you've paired your phone's Bluetooth and allowed all permissions, but cannot access the CarPlay or Android Auto interface:

  1. In the Becker box interface, navigate to "Settings" > "System" > "Factory reset" to reset the module.
  2. Simultaneously, reset your mobile phone's network settings.
  3. If the issue persists, please contact customer support.

10. Warranty & Support

Our products undergo strict function and performance tests to ensure quality. All products are covered by the three guarantees policy for vehicle electronics.

If you encounter any problems while using the product, please contact your dealer or the manufacturer's customer support for assistance.

For a detailed user manual in PDF format, please refer to the official document: User manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.