XOSS G2 Plus

Contents

XOSS G2 Plus Bike Computer User Manual

Wireless GPS Cycling Speedometer

XOSS G2 Plus Bike Computer displaying various cycling data

The XOSS G2 Plus device showing speed, time, distance, calories, and elevation.

1. Introduction

The XOSS G2 Plus is a smart GPS cycling computer designed to provide comprehensive data for your rides. Featuring a 2.2-inch fully laminated screen, ANT+ sensor compatibility, and a long-lasting battery, it's an ideal companion for road biking and mountain biking.

Close-up of XOSS G2 Plus screen showing clear data display

The 2.2-inch fully laminated screen ensures clear data display and features auto backlight.

2. Setup

2.1. Packing List

Please check the package contents to ensure all items are present:

  • XOSS G2 Plus Bike Computer (x1)
  • Cycling Computer Mount (x1)
  • Type-C USB Cable (x1)
  • Protection Rubber Pad (x1)
  • Rubber Band (x2)
  • User Manual (This digital document serves as your guide)
Contents of the XOSS G2 Plus package including the computer, mount, cable, and accessories

The XOSS G2 Plus package contents: bike computer, mount, USB cable, rubber pad, and rubber bands.

2.2. Installation

Follow these steps to securely mount your XOSS G2 Plus to your bicycle:

  1. Place the provided rubber pad on the back of the bike stand.
  2. Use a rubber band to secure the bracket to your handlebar or stem.
  3. Align the tabs on the back of the XOSS G2 Plus device with the grooves on the bike stand.
  4. Press down slightly and rotate the device 90 degrees until it locks firmly into place.
Diagram showing how to install the XOSS G2 Plus bike computer mount and device

Installation diagram: Secure the mount with rubber bands, then twist the computer onto the mount until it clicks.

3. Operating Instructions

3.1. Device Overview

The XOSS G2 Plus features two main buttons for operation:

  • Left Button:
    • Long Press: End recording
    • Short Press: Start / Pause / Resume
  • Right Button:
    • Long Press: Power on / Off
    • Short Press: Switch data display

3.2. GPS Positioning

  1. Power On: Long press the right button to turn on the device.
  2. GPS Search: Short press the left button to start searching for GPS. The GPS icon will appear and flash.
  3. Acquire Signal: After startup, remain static for a few minutes in an open, barrier-free area to acquire a GPS signal. The GPS icon will stop flashing with a BEEP prompt when the device is ready.
  4. Save Workout: Long press the left button to save your workout after ending your ride. The bike computer will then restore its initial interface.

3.3. Connect with XOSS APP

The XOSS APP allows you to manage settings and sync workout data:

  1. Search for "XOSS" in Google Play Store or Apple App Store, or scan the QR code below to download the app.
  2. Turn on your XOSS G2 Plus and ensure your phone's Bluetooth is enabled.
  3. Open the XOSS APP, navigate to Devices > Bike Computers > G/G+ to connect.
  4. Once connected, you can adjust settings like Backlight, Key Tone, Auto Pause, Speed Alert, Tire Circumference, Units (Metric/Imperial), Time Zone, etc. Workout data will automatically sync to the app.
QR code for downloading the XOSS App

Scan this QR code to download the XOSS App.

3.4. Manage Workouts

  1. Connect your G2 Plus to the XOSS APP.
  2. Go to Storage > Workout.
  3. Tap Edit in the upper right corner to select workouts for deletion or resync.

3.5. Custom Data Layout

You can customize the data displayed on your device screen:

  1. Connect your G2 Plus to the XOSS APP.
  2. Go to Data Layout.
XOSS G2 Plus displaying custom data layouts for different cycling metrics

The XOSS G2 Plus supports custom display layouts, showing various data configurations.

3.6. Time Zone Setting

To ensure accurate time display:

  1. Connect your G2 Plus to the XOSS APP.
  2. Go to Settings > User Profile > Time Zone. The device will sync with your phone's time zone.

3.7. Data Display

The XOSS G2 Plus can record and display 24 types of data, with up to 10 data fields visible on one page:

  • Current Data: Clock, Temperature (TEMP), Speed (SPD), Grade (GRD), Heart Rate (HR), Cadence (CAD), Moving Time (TIME), Distance (DISTANCE), Calories (CALORIE), Elevation (ELEVATION).
  • Average Data: Average Speed (AVG), Average Heart Rate (AVG HR), Average Cadence (AVG CAD).
  • Other Metrics: Paused Time (PAUSE), Elevation Gain (GAIN), Vertical Ascent in Metres (VAM), Elevation Loss (LOSS).
  • Maximum Data: Max Speed (MAX SPD), Max Heart Rate (MAX HR), Max Cadence (MAX CAD), Total Time (TOTAL), Odometer (ODO), Estimated Power (PWR(e)), Max Elevation (MAX ELEVATION).
XOSS G2 Plus screen with 10 data fields labeled: Clock, Speed, Heart Rate, Time, Calorie, Temperature, Grade, Cadence, Distance, Altitude

The XOSS G2 Plus displays 10 data fields per page, including Clock, Temperature, Speed, Heart Rate, Cadence, Time, Distance, Calorie, Grade, and Altitude.

3.8. ANT+ Sensor Connection

The XOSS G2 Plus supports ANT+ connection for Heart Rate, Cadence, and Speed sensors. It does NOT support connection with power meters.

  1. Bring the G2 Plus device within 3 meters of your sensors, and ensure it is at least 10 meters away from other riders' sensors.
  2. Press both buttons (left and right) simultaneously on the XOSS G2 Plus until the ANT+ icon starts flashing. This indicates the device is searching for active sensors nearby.
  3. If pairing succeeds, the ANT+ icon will remain static.
  4. Press the right button again to enter the "Tire Circumference" setting interface.
Diagram showing ANT+ sensor connection process for XOSS G2 Plus

ANT+ sensor connection process: Place device near sensors, press both buttons, wait for icon to stop flashing.

3.9. Device Settings (Circumference, Units, Time Zone)

You can adjust these settings directly on the device:

  • Tire Circumference Setting (P1):
    • Press the left button to set numbers.
    • Press the right button to switch position.
    • Long press the right button to proceed to the next step.
  • Metric/Imperial Unit Setting (P2):
    • Press the left button to switch units (km/h or mph).
    • Long press the right button to proceed to the next step.
  • Time Zone Setting (P3):
    • Press the left button to switch numbers.
    • Press the right button to switch position.
    • Long press the right button to end setting.
XOSS G2 Plus screens showing P1 (Tire Circumference), P2 (Metric/Imperial Units), and P3 (Time Zone) settings

Device settings screens: P1 for tire circumference, P2 for metric/imperial units, and P3 for time zone.

4. Maintenance

4.1. Charging

The XOSS G2 Plus uses a Type-C charging interface. When charging, the battery icon in the upper right corner of the display will change from empty to full. When there are three solid bars and it's not flashing, charging is complete.

4.2. Cleaning

Wipe the device with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the screen or casing.

4.3. Firmware Upgrade

When new firmware is available, the XOSS APP will prompt you to update. Keeping your firmware up-to-date ensures optimal performance and access to new features.

If you encounter issues during a firmware upgrade (e.g., getting stuck in DFU mode), try toggling Bluetooth off and back on in your phone's settings, then reconnect to the XOSS APP to retry the upgrade.

5. Troubleshooting

5.1. GPS Signal Issues

  • Ensure you are in an open, barrier-free area when searching for GPS.
  • Remain static for a few minutes after turning on the device to allow it to acquire a stable signal.

5.2. Sensor Connection Issues

  • Ensure your ANT+ sensors are active and within 3 meters of the XOSS G2 Plus.
  • Keep the device at least 10 meters away from other riders' sensors to avoid interference.
  • Check sensor batteries.

5.3. App Sync Issues

  • Verify Bluetooth is enabled on both your phone and the XOSS G2 Plus.
  • Ensure the XOSS APP is updated to the latest version.
  • Restart both the device and your phone if connection problems persist.

5.4. Battery Draining Faster Than Expected

  • Actual battery life may vary depending on usage environment, temperature, and backlight settings.
  • Ensure the device is fully charged before long rides.
Two cyclists riding on a dirt path with text '28Hrs Battery Life*'

The XOSS G2 Plus offers up to 28 hours of battery life, though actual duration may vary with usage conditions.

6. Specifications

Product NameXOSS G2 Plus Smart GPS Cycling Computer
Dimensions71mm x 48mm x 19.1mm
Weight42g
Display Size2.2 inches
Display ColorBlack and White
Operating Temperature-10°C ~ 50°C
Battery Life28 hours
Battery Type500mAh Rechargeable Lithium Ion
Charging InterfaceType-C
Waterproof RatingIPX7
ANT+ Sensor SupportSpeed Sensor, Heart Rate Monitor, Speed/Cadence Sensor
Data Display Types24 Types
ConnectivityGPS, ANT+, Bluetooth
Automatic FeaturesAuto backlight, Auto-pause, Automatic sleep
Touch ScreenNo
NavigationNo
LanguageEnglish
Comparison table of XOSS G1 vs G2 Plus showing improvements in screen size, data per page, battery life, and charging port

Performance improvements of the XOSS G2 Plus (Gen 2) compared to the Gen 1 model.

7. Warranty & Support

7.1. Warranty Information

The XOSS G2 Plus comes with a one-year free warranty from the date of purchase. For warranty service, please contact your original dealer.

The warranty does not cover the following conditions:

  • Normal aging and loss of battery capacity.
  • Damage or loss due to improper installation.
  • Damage caused by abnormal use, such as exposure to high temperatures or water damage beyond IPX7 rating.
  • Damage caused by self-dismantling or unauthorized maintenance.

7.2. Support

For more product information, FAQs, and support, please visit:

8. User Tips

Based on user feedback, here are some helpful tips for getting the most out of your XOSS G2 Plus:

  • Ease of Use: Users find the device small, cute, and simple to operate, making it suitable for various cycling levels.
  • Visibility: The screen provides clear information, even in direct sunlight.
  • Sensor Compatibility: It reliably connects with ANT+ sensors from other brands, including speed, cadence, and heart rate monitors.
  • GPS Accuracy: The GPS is noted for its precision in tracking routes and data.
  • App Integration: The device pairs easily with smartphones via Bluetooth and connects smoothly to the XOSS app for ride tracking and data synchronization.
  • Unit Configuration: The device supports both kilometers and miles, which can be configured via the settings.
  • Battery Performance: Many users report the battery lasts multiple days with regular commuting use.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.