MARPOU Smart Ceiling Lamp

Contents

MARPOU Smart Ceiling Lamp

User Instruction Manual

1. Product Overview

The MARPOU Smart Ceiling Lamp is a modern LED lighting solution designed for various indoor spaces. It features stepless dimming, adjustable color temperature, and multiple control options including a remote control, a smartphone application, and a standard wall switch.

Key Features:

  • Stepless Dimming (10% - 100% brightness)
  • Adjustable Color Temperature (2700K Warm White to 6000K Cold White)
  • Three Control Modes: Remote Control, APP Control, Wall Switch Control
  • Durable Design: Mosquito-proof, Moisture-proof, Dust-proof
  • Easy Surface-Mounted Installation
MARPOU Smart Ceiling Lamp with remote and app icon

Figure 1: MARPOU Smart Ceiling Lamp (47cm model shown) with remote control and app interface.

2. Setup and Installation

Before installation, ensure the power supply is turned off at the main circuit breaker to prevent electric shock.

2.1 Package Contents

Verify that all components are present:

  • Smart Ceiling Lamp unit
  • Mounting bracket
  • Screws and wall anchors
  • Remote control (batteries may not be included)
  • User Manual (this document)

2.2 Installation Steps

  1. Prepare the Ceiling: Choose a suitable location on the ceiling for installation. Ensure the surface is clean and flat.
  2. Attach Mounting Bracket: Secure the mounting bracket to the ceiling using the provided screws and wall anchors. Mark the drill points, drill pilot holes, and then fasten the bracket.
  3. Connect Wiring: Connect the household electrical wires to the lamp's wires. Typically, the live wire (usually brown or red) connects to the lamp's live wire, and the neutral wire (usually blue or black) connects to the lamp's neutral wire. Ensure connections are secure.
  4. Mount the Lamp: Align the lamp unit with the mounting bracket and secure it in place. Twist or slide the lamp until it locks firmly onto the bracket.
  5. Restore Power: Turn the power supply back on at the main circuit breaker.
Back of MARPOU Smart Ceiling Lamp showing wiring and mounting points

Figure 2: Rear view of the lamp showing wiring connections and mounting mechanism.

2.3 Remote Control Pairing

The remote control is usually pre-paired. If not, or if you need to re-pair:

  1. Ensure the lamp is powered on.
  2. Within 5 seconds of turning on the lamp, press and hold the 'SETUP' button on the remote control until the lamp blinks, indicating successful pairing.

2.4 APP Control Setup

  1. Download App: Scan the QR code provided on the product packaging or in the product description to download the official control application to your smartphone.
  2. Register/Login: Open the app and create an account or log in.
  3. Add Device: In the app, select 'Add Device' or the '+' icon.
  4. Pairing Mode: Turn the lamp's wall switch OFF and then ON. Within 5 seconds of turning it ON, press the 'Connection' button (often a Wi-Fi or pairing icon) in the app. The light will blink to confirm connection.
Remote control layout and app QR code

Figure 3: Remote control functions and QR code for app download.

3. Operating Instructions

The MARPOU Smart Ceiling Lamp offers versatile control options for a personalized lighting experience.

3.1 Control Modes

Diagram showing Remote Control, APP Control, and Switch Control options

Figure 4: Three available control modes for the smart ceiling lamp.

  • Remote Control: Provides full functionality including ON/OFF, brightness adjustment, color temperature changes, night mode, and timer.
  • APP Control: Offers similar functions to the remote control, often with additional scene modes and scheduling capabilities via your smartphone.
  • Wall Switch Control: A standard wall switch can turn the lamp ON/OFF and quickly cycle through preset color temperatures (e.g., Warm White, Natural Light, Cold White) with successive toggles.

3.2 Remote Control Functions

  • Power Button (I/O): Turns the lamp ON or OFF.
  • Brightness Adjustment (+/-): Increases or decreases light intensity (stepless dimming from 10% to 100%).
  • Color Temperature (K+/K-): Adjusts the light from warm white (2700K) to cold white (6000K).
  • SETUP: Used for pairing the remote control.
  • Night Mode (Moon Icon): Sets the lamp to a very low brightness, warm light for night use.
  • Timer (Clock Icon): Activates a timer function (specific duration may vary or be configurable via app).
  • Preset Color Temperatures (Sun Icons): Quick selection for warm, natural, or cold light.

3.3 Dimming and Color Temperature Adjustment

Stepless dimming demonstration from warm white to cold white and brightness levels

Figure 5: Stepless dimming and color temperature adjustment from 2700K to 6000K.

Use the brightness and color temperature buttons on the remote or the sliders in the app to fine-tune your lighting. The lamp supports stepless adjustment, allowing for precise control over both light intensity and hue.

Video 1: Product demonstration showing features, remote control operation, and light adjustments.

4. Maintenance

The MARPOU Smart Ceiling Lamp is designed for durability and minimal maintenance.

4.1 Cleaning

To clean the lamp, ensure it is turned off and cool. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.

4.2 Design Features

Diagram showing mosquito-proof, moisture-proof, and dust-proof features

Figure 6: Lamp body designed to be mosquito-proof, moisture-proof, and dust-proof.

The lamp's sealed design helps prevent dust, moisture, and insects from entering the light fixture, reducing the need for frequent internal cleaning and extending its lifespan.

5. Troubleshooting

If you encounter issues with your smart ceiling lamp, try the following solutions:

  • Lamp Not Turning On:
    • Check the main power supply and wall switch.
    • Ensure wiring connections are secure.
  • Remote Control Not Responding:
    • Check or replace the batteries in the remote control.
    • Ensure the remote is within range and pointed towards the lamp.
    • Try re-pairing the remote control (see Section 2.3).
  • APP Connection Issues:
    • Ensure your smartphone's Bluetooth/Wi-Fi is enabled.
    • Try re-pairing the device with the app (see Section 2.4).
    • Restart your smartphone and the lamp (by toggling the wall switch).
  • Lamp Does Not Remember Last State:
    • Some models may not retain the exact last setting after being turned off via the wall switch. Use the remote or app for consistent state recall.
  • Multiple Lamps with One Remote:
    • If you have multiple lamps and wish to control them with a single remote, ensure they are all paired to that remote. This may require pairing them one by one or simultaneously if the remote supports group control. Refer to the app for group management features.

6. Specifications

FeatureDescription
BrandMARPOU
Item TypeCeiling Lights
Installation StyleSurface Mounted
Smart DeviceYes
Control MethodsAPP and Remote Control
Light SourceLED Bulbs (Included)
DimmableYes (Stepless Dimming 10%-100%)
Color Temperature2700K (Warm White) - 6000K (Cold White)
Switch TypeREMOTE CONTROL
VoltageAC100-240V
Power SourceAC
Body MaterialPC (Polycarbonate)
FinishPC, Painted
MaterialPP/Plastic
Luminous Flux2000-82000 Lumens (model dependent)
Lighting Area8-30 square meters (model dependent)
CertificationsCE, ROHS

6.1 Dimensions and Wattage (Examples)

47cm lamp diameter comparison with A4 paper

Figure 7: Large model with 47cm diameter.

27cm lamp dimensions, 18-36W, AC100-240V

Figure 8: Smaller model with 27cm diameter, 5.5cm height, 18-36W.

  • Small Model: Approx. 27cm (10.63 inches) diameter, 5.5cm (2.17 inches) height. Wattage: 18-36W. Lighting Area: 8-15m².
  • Medium Model: Approx. 37cm diameter. Wattage: 50W. Lighting Area: 15-25m².
  • Large Model: Approx. 47cm diameter. Wattage: 80W. Lighting Area: 20-30m².

7. User Tips

  • Installation: Installation is generally simple and can be done by following the steps carefully. Ensure power is off before starting.
  • Brightness: The larger models (e.g., 47cm) are very bright and suitable for bigger rooms.
  • App Pairing: For app registration, turn the wall switch OFF and ON, then quickly press the connection button in the app. The light will blink to confirm.
  • Versatility: Utilize the remote control for easy adjustment of light color and brightness to suit different moods and activities.

8. Warranty and Support

For any product defects or operational issues not covered in this manual, please contact your seller or the manufacturer's customer support. Keep your purchase receipt as proof of purchase.

For a more detailed guide and additional information, you may refer to the full user manual PDF available here.

© 2023 MARPOU. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.