GPS Tracker TK102B

Contents

GPS Tracker TK102B User Manual

Model: TK102B

Preface

Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any any errors or omissions in this document.

1. Summary

Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS, APP and Internet. It adopts the most advanced technology of GPS and AGPS dual positioning.

1.1 Main Functions

  • GSM quad-band frequency;
  • Real time tracking by SMS/GPRS;
  • Low battery alarm;
  • Geo-fence alarm;
  • Move alarm;
  • SOS alarm;
  • Monitor;
  • Vibration alarm (optional);
  • Add Smart sleep save power Mode;
  • Add AGPS function, receive GPS signals faster;
  • Add built-in storage memory.

1.2 Specifications

ContentSpecs
Dim.67mm x 47mm x 21mm
Weight35g
NetworkGSM/GPRS
Band850/900/1800/1900Mhz
GSM chipMT6261
GPS chipUblox 7020
GPS sensitivity-159dBm
GPS accuracy5m
Time To First FixCold status: 45s
Warm status: 35s
Hot status: 1s
Work voltage110-220V input, 5V output
Storage Temp.-40°C to +85°C
Operation Temp.-20°C to +55°C
Humidity5%--95% non-condensing

1.3 LED Indicator Status

LED Indicator StatusMeaning
Green - solidNo GSM signal
Green - flashingGot GSM signal

2. Device Overview

GPS Tracker TK102B in hand, showing car and phone app tracking
Figure 1: GPS Tracker TK102B in hand, illustrating its use for vehicle tracking via a mobile application.
Package Contents: GPS tracker unit, rechargeable Li-ion battery, USB charging cable, charger cable
Figure 2: Included components: GPS tracker unit, rechargeable Li-ion battery, USB charging cable, and a charger cable.

Side Face

The side face of the device features an indicator for signals, an SOS Button, and an ON/OFF Button. You can update software and charge the battery from this side.

Bottom Face

The bottom face of the device houses the built-in GSM/GPRS module and a Microphone.

3. Setup and Quick Usage

3.1 Important Notices

  • GPS tracking requires outdoor operation and a mobile phone GSM signal. GPS satellite signals can be blocked by metal or buildings above the GPS tracker.
  • Ensure you use a GSM 2G SIM card or a 2G GSM network compatible SIM card. The SIM card must support making calls, sending messages, and GPRS network. It must also have sufficient credit and the PIN code must be canceled.

The device supports Normal SIM, Micro SIM, and Nano SIM cards. Please ensure the SIM card is compatible and correctly inserted.

3.2 Quick Usage Guide

  1. Insert the SIM card: Carefully insert the SIM card into the device as shown in the product diagram.
  2. Insert Battery and Charge: Insert the rechargeable battery and charge the device fully to ensure normal operation.
  3. Acquire GPS Signal: Take the device outdoors and move it to receive a GPS signal.
  4. Initial Positioning: Call the device's SIM card number from your mobile phone and hang up, or send the SMS command "smslink123456" to the tracker's SIM card. Then, send "time zone123456 time". The tracker will reply with positioning information, indicating the local time zone.

4. Command Instructions

The device's default password is 123456. All commands are sent via SMS to the tracker's SIM card. When a command includes a "+", it signifies a space, not the "+" character itself. After setting an admin number, all alarm messages will be sent to that authorized number; other phone numbers sending commands will not receive replies.

4.1 Admin Number Setting

  • Command: admin123456 [space] phone number (Use your own mobile phone number, not the tracker's number).
  • Reply: admin ok
  • Example: admin123456 13725556021

Note: The device supports up to 5 admin numbers. Set the first authorization number, then use it to set other authorization numbers. If the authorization number is forgotten or lost, you can send reset123456 to restore factory settings.

Admin Number Canceling

  • Command: noadmin123456 [space] phone number
  • Reply: noadmin ok

4.2 Move Alarm Setting

This alarm works only when the device has a GPS signal. The scope is a circle with a radius of 200 meters.

  • Command: move123456
  • Reply: move ok

Move Alarm Canceling

  • Command: nomove123456
  • Reply: nomove ok

4.3 Low Battery Alarm

When the GPS device battery is less than 30%, it will send an SMS: low battery + Ge-info alarm, at 3-minute intervals.

Canceling Low Battery Alarm

  • Command: Send "low battery" to the tracker.

4.4 SOS Help Setting

Long press the SOS button for 3 seconds. The tracker will send an SMS "SOS HELP! + lat./long." to all authorized numbers.

Canceling SOS Setting

  • Command: "help me"

4.5 Monitor Setting

The default mode is "tracker" (Tracker mode).

  • Command: Send SMS "monitor + password" to the unit to switch to "monitor" mode.

Once in monitor mode, you can call the device's SIM card number from your mobile phone to listen to the voices around the device.

Monitor Canceling

  • Command: Send SMS "tracker123456" to the unit to switch back to "tracker" mode.

4.6 Set Vibration Alarm (Optional)

This function may not be available by default on all units.

  • Command: "shock + password" to the device to activate.

After 5 minutes of static, if the sensor is triggered, it will send a "Vibrate alarm + latitude & longitude" message.

Canceling Vibration Alarm

  • Command: "noshock + password"

4.7 Terminal (Local) Time Setting

The factory setting is GMT 0.

  • Command: time zone123456 [space] local time zone
  • Reply: time ok!
  • Note: 1 is east 1, -1 is west 1.

4.8 Change IMEI Number

  • Command: imei123456 [space] + new imei number
  • Example: setimei123456 352887076633221

4.9 Change Time Upload Interval

The default upload interval is 10 seconds.

  • Command: t002m***n123456 (e.g., t002m030s123456 for 2 minutes)
  • Reply: t002***n ok
  • (030s means every 2 minutes send data to platform)

5. Support Website Tracking and APP Tracking

The device supports real-time positioning, with a default upload position every 2 minutes. You can change this upload time interval.

5.1 Scan APP and Download APP

  1. Scan QR Code: Use a browser to scan the provided QR code.
  2. Choose Platform: Select either Android or iPhone to download the installation app.
  3. iOS APP Download: For iOS, log in to the App Store, search for "dagps", and install the "dagps APP".

5.2 Login Platform Positioning

  1. Open Website: Go to www.gps110.org.
  2. Login: Use the tracker ID to log in. The default password is 123456.

5.3 Register Administrator Account and Track Multiple Devices

To register an administrator account and track multiple devices:

  1. Register APP Account: Register an account within the APP.
  2. Login to APP: Log in to the APP using your registered account.
  3. Add Device: Navigate to the device list and add your device(s). Fill in the required information.

If you add more than two devices, continue to add ID numbers. If the device is already online on the platform, you do not need to set APN commands.

5.4 Set Device Online in Platform

To ensure your device is online and communicating with the platform, you may need to configure APN settings via SMS commands:

  • SMS1: gprs123456
  • SMS2: APN123456 [space] Apn name

For example, if your SIM card company tells you the APN name is ABC, send: APN123456 ABC.

If the APN requires a username and password, include them:

  • Example: APN123456 [space] APN name [space] APN user name [space] APN password

6. If Using Another Platform, Start Online Tracker

If you are using a different tracking platform, you will need to send SMS commands or use the app to set the online platform, including DNS and port settings, and APN.

NameCommandExample
Set APNapn123456 apn Nameapn123456 cmnet
apn123456 apn name user passwordApn123456 cmnet cmwap 66666
Set IP / DNS portadminip123456 IP portAdminip123456 110.92.64.21 7018
Adminip123456 DNS portAdminip123456 www.gps110.org 7018
ParameterCheck123456Get device status

7. Troubleshooting (FAQ)

FAQInstructions/Solutions
Fail to turn onPlease check if the device has electricity and if the charging cable is connected and working. Ensure the battery is rechargeable.
No GSM signalPlease check if the SIM card is installed correctly. Ensure the SIM card is a 2G GSM network card. Cancel the SIM card PIN code.
No reply to SMS commandThe SMS command password might be wrong, or the format is incorrect. Restore factory settings by sending "begin123456".
No reply & No alarm messageCheck if the Authorized / admin phone number is incorrect and if the SIM card is normal.
SMS position OK, cannot position on APP and webPlease check if the APN is correctly set. Find out the correct APN content from your SIM card provider.
Platform position is different from the actual position.This may occur if there is no uploading position time or no GPS signal, and the platform shows the last known position (LBS position information). Make sure the device can receive the GPS signal normally by taking it outdoors and walking around.

8. User Tips

  • Battery Life and Sleep Mode: The device includes a 'Smart sleep save power Mode' feature. If you experience rapid battery consumption, ensure this mode is activated. Refer to the command instructions for power-saving settings if available via SMS.
  • App Compatibility: The official application for tracking is compatible with both Android and iPhone devices. You can download it from the respective app stores or by scanning the provided QR code.
  • GPS Signal Acquisition: For best results, ensure the device is outdoors and has a clear line of sight to the sky when attempting to acquire a GPS signal. Movement can sometimes help in initial signal acquisition.

9. Support and Further Information

For additional support or detailed inquiries not covered in this manual, please refer to the official user manual PDF available at: User manual (PDF). This document provides comprehensive guidance and technical details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.