1. Introduction
The TK102B GPS Tracker operates using existing GSM/GPRS networks and GPS satellites to locate and monitor remote targets via SMS, mobile application, and the Internet. It incorporates advanced GPS and AGPS dual positioning technology for accurate tracking.
Key Features:
- GSM quad-band frequency support
- Real-time tracking via SMS/GPRS
- Low battery alarm
- Geo-fence alarm for defining safe areas
- Movement alarm
- SOS emergency alarm
- Voice monitoring capability
- Vibration alarm (optional)
- Smart sleep mode for power saving
- AGPS function for faster GPS signal acquisition
- Built-in storage memory
2. Product Overview
The TK102B GPS Tracker is a compact device designed for various tracking applications. It features a durable casing and essential components for reliable operation.
Components:
Device Layout:
The device features an ON/OFF button, an SOS button, a built-in GSM/GPRS module, a microphone, and LED indicators for signals. The SIM card slot is located on the side for easy access.
Side Face: Includes the charging port (for software updates and battery charging), signal indicators, SOS Button, and ON/OFF Button.
Bottom Face: Houses the built-in GSM/GPRS module and microphone.
LED Indicator Status:
- Green - solid: No GSM signal
- Green - flashing: Got GSM signal
3. Specifications
| Content | Specs |
|---|---|
| Dimensions | 67mm × 47mm × 21mm |
| Weight | 35g |
| Network | GSM/GPRS |
| Band | 850/900/1800/1900Mhz |
| GSM Chip | MT6261 |
| GPS Chip | Ublox 7020 |
| GPS Sensitivity | -159dBm |
| GPS Accuracy | 5m |
| Time To First Fix (Cold Status) | 45s |
| Time To First Fix (Warm Status) | 35s |
| Time To First Fix (Hot Status) | 1s |
| Work Voltage | 110-220V input, 5V output |
| Storage Temperature | -40°C to +85°C |
| Operation Temperature | -20°C to +55°C |
| Humidity | 5%–95% non-condensing |
4. Setup
Important Notices:
- The GPS tracker requires a mobile phone GSM signal to function. It must be used outdoors for GPS tracking. Metal objects or buildings directly above the tracker can block GPS satellite signals.
- Ensure you use a 2G GSM SIM card or a compatible 2G GSM network SIM card. The SIM card must support making calls, sending messages, and GPRS network access. Ensure the SIM card has sufficient balance and that the PIN code is disabled.
Quick Usage Guide:
- Insert SIM Card: Carefully insert the SIM card into the designated slot on the device. Refer to the diagram below for correct orientation. The device supports Normal, Micro, and Nano SIM cards, but ensure it's a 2G GSM compatible card.
- Insert Battery & Charge: Insert the rechargeable battery. Connect the device to a power source using the provided charging cable to ensure it is fully charged before first use.
- Acquire GPS Signal: Take the device outdoors and move it around to help it acquire a GPS signal.
- Initial Positioning:
- Call the device's SIM card number from your mobile phone and hang up after a few rings.
- Alternatively, send the SMS command
smslink123456to the SIM card in the tracker. - To set the time zone, send
time zone123456 time. The tracker will reply with positioning information, and the time will be adjusted to your local time zone.
5. Operating Instructions
The default password for the device is 123456. When sending SMS commands, do not type the "+" symbol; use a space instead.
5.1 SMS Commands
- Admin Number Setting:
Command:
admin123456 [space] phone number(Your own mobile phone number, not the tracker's number).Reply:
admin okNote: The first authorized number can set other authorization numbers. If you forget or lose the authorization number, send
reset123456to restore factory settings.To cancel an admin number:
noadmin123456 [space] phone number. Reply:noadmin ok - Move Alarm Setting: (Works only when GPS signal is acquired, within a 200-meter radius.)
Command:
move123456Reply:
move okTo cancel move alarm:
nomove123456. Reply:nomove ok - Low Battery Alarm:
When the battery is below 30%, the device sends an SMS:
low battery + Ge-info alarmevery 3 minutes.To cancel low battery alarm: Send
low batteryto the tracker. - SOS Help Setting:
Long press the SOS button for 3 seconds. The tracker will send SMS
SOS HELP! + lat./long.to all authorized numbers. - Monitor Setting: (Default mode is "tracker" mode.)
To switch to monitor mode: Send SMS
monitor123456to the unit. You can then call the device's SIM card to listen to surrounding voices.To cancel monitor mode: Send SMS
tracker123456to the unit to switch back to "tracker" mode. - Vibration Alarm Setting: (Optional feature, not all devices may have this function.)
To activate: Send
shock123456to the device. It will become effective after 5 minutes of static. When triggered, it will sendVibrate alarm + latitude & longitude.To cancel: Send
noshock123456. - Terminal (Local) Time Setting: (Factory setting GMT 0)
Command:
time zone123456 [space] local time zone(e.g.,time zone123456 1for GMT+1,time zone123456 -1for GMT-1).Reply:
time ok! - Change IMEI Number:
Command:
imei123456 [space] new imei number(e.g.,setimei123456 352887076633221) - Change Time Upload Interval: (Default 10 seconds)
Command:
t002m***n123456(e.g.,t002m030s123456for 30 seconds,t002m002n123456for 2 minutes).Reply:
t002***n ok
5.2 APP and Website Tracking
The device supports tracking via a dedicated mobile application and a web platform.
Download the APP:
- Scan the QR code below with your mobile phone. Open the link with a browser and choose either Android or iPhone to download the installation app.
- For iOS users, you can also log in to the App Store, search for "dagps", and install the dagps APP.
Login to the Platform:
Open www.gps110.org. Use your tracker ID to log in. The default password is 123456.
Register Administrator Account and Track Multiple Devices:
To manage multiple devices, register an administrator account within the APP. Log in to your registered account, navigate to the device list, and add new devices by filling in their details.
Set Device Online in Platform (APN Settings):
If your device is not showing online on the platform, you may need to configure the APN settings. No APN commands are needed if the device is already online.
- SMS1:
gprs123456 - SMS2:
APN123456 [space] Apn name(e.g., if your SIM card company tells you the APN name is ABC, sendAPN123456 ABC). - If the APN requires a username and password:
APN123456 [space] Apn name [space] APN user name [space] APN password.
Using Other Platforms:
If you wish to use a different tracking platform, you will need to set the DNS and port using SMS commands or the app.
| Name | Command | Example |
|---|---|---|
| Set APN (Name only) | apn123456 apn Name |
apn123456 cmnet |
| Set APN (Name, User, Pass) | apn123456 apn name user password |
Apn123456 cmnet cmwap 66666 |
| Set IP/DNS (IP Port) | adminip123456 IP port |
Adminip123456 110.92.64.21 7018 |
| Set IP/DNS (DNS Port) | Adminip123456 DNS port |
Adminip123456 www.gps110.org 7018 |
| Parameter Check | Check123456 |
Get device status |
5.3 Advanced Features
6. Troubleshooting (FAQ)
| Issue | Instructions/Solutions |
|---|---|
| Fail to turn on | Check if the device has electricity and if the charging cable is connected and working. |
| No GSM signal |
|
| No GPS signal | Ensure the device can receive a GPS signal normally. Take the device outdoors or walk around to acquire a signal. |
| No reply to SMS command | The SMS command password might be wrong, or the format is incorrect. Try restoring factory settings by sending begin123456. |
| No reply & No alarm message | Check if the authorized/admin phone number is incorrect and ensure the SIM card is normal. |
| SMS position OK, cannot position on APP/web | Check if the APN is correctly set. Find out the correct APN content from your SIM card provider and configure it. |
| Platform position differs from actual position | This indicates no uploading position time or no GPS signal, meaning the last known position is displayed. Ensure the device can receive a GPS signal normally by taking it outdoors and walking around. |
7. User Tips
- SIM Card Requirement: A 2G GSM SIM card is essential for the tracker's functionality. Ensure it's active and has no PIN lock.
- Battery Life: To maximize standby time, avoid enabling the move alarm and continuous real-time location tracking on the platform unless necessary.
- SOS Functionality: The SOS button will send alerts to all authorized numbers, ensuring multiple contacts are notified in an emergency.
- Initial Setup: Always perform the initial GPS signal acquisition outdoors in an open area for best results.
8. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Battery Care: Charge the battery regularly, even if the device is not in active use, to maintain its lifespan. Avoid extreme temperatures during charging and storage.
- Storage: Store the device in a cool, dry place away from direct sunlight and moisture when not in use for extended periods.
- Water Resistance: The device has an IP65 waterproof rating, meaning it is protected against dust ingress and low-pressure water jets. However, it is not designed for submersion.
9. Warranty and Support
For detailed warranty information, technical support, and further documentation, please refer to the official user manual PDF provided by the manufacturer. You can view the PDF document for this item at: User Manual (PDF).
The manufacturer assumes no responsibility for any errors or omissions in this document. Specifications and information are subject to change without prior notice.