PDDAXLQUE CP24

Contents

Dialog1453 CP24 Wireless Transmission Adapter User Manual

Modbus IoT Serial Adapter RS485 to Bluetooth Serial Converter

1. Introduction

The DX-CP24 Bluetooth to RS485 serial port adapter is a Bluetooth communication device developed by DX-SMART. It is designed to convert RS485 interface devices to Bluetooth wireless transmission, eliminating the need for traditional messy cables and reducing wiring inconvenience and maintenance costs. This adapter facilitates wireless debugging and control via mobile phones or computers.

CP24 Wireless Transmission Adapter
Figure 1: CP24 Wireless Transmission Adapter with Antenna

2. Package Contents

The contents of your package may vary based on the model purchased:

  • CP24 Mobile Phone Model (T1):
    • 1 x DX-CP24 Adapter
    • 1 x Rubber Stick Antenna
    • 1 x User Manual
    • 1 x Product Data Guide
    • 1 x RJ45 Plug to 4P 5.0mm Terminal Block
  • CP24 Computer Model (T2):
    • 1 x DX-CP24 Adapter
    • 1 x Rubber Stick Antenna
    • 1 x CP11 Adapter
    • 1 x User Manual
    • 1 x Product Data Guide
    • 1 x RJ45 Plug to 4P 5.0mm Terminal Block
  • CP24 Device Model (T3 - Bridge):
    • 2 x DX-CP24 Adapters
    • 2 x Rubber Stick Antennas
    • 1 x User Manual
    • 1 x Product Data Guide
    • 2 x RJ45 Plug to 4P 5.0mm Terminal Blocks

Video 1: CP24 Unboxing and Overview

3. Key Features

  • Chipset: Renesas DA14531 chip with PA Amplifiers for stable performance.
  • Bluetooth Version: BLE 5.1 for efficient and reliable wireless communication.
  • Supported Interfaces: RS485.
  • Protocol Support: ModBus protocol.
  • Communication: Supports communication between PC/iOS/Android devices and RS485 devices.
  • Baud Rates: Supports changing baud rates, with options for 2400, 4800, 9600, 19200, 38400, 57600, and 115200 bps.
  • Antenna: External rubber stick antenna for enhanced signal range.
  • Visual Communication Distance: Up to 90m for mobile phones, 70m for PCs, and 400m for device-to-device communication (in unobstructed, open areas).
  • Power Range: DC5-36V.
  • Operating Temperature: -40°C to +85°C.
  • Device Size: 60 * 27.8 * 16.4mm.
CP24 Key Features and Dimensions
Figure 2: CP24 Key Features and Dimensional Diagram

4. Hardware Overview

4.1 CP24 Adapter

The CP24 adapter features several interfaces and indicators:

  • 1. A+: RS485 interface (Data +)
  • 2. B-: RS485 interface (Data -)
  • 3. VCC: Power supply interface (DC5-36V)
  • 4. GND: Ground interface
  • 5. WORK: BLE status indicator (Blue LED)
  • 6. RX: Data receiving indicator (Blue LED)
  • 7. TX: Data transmit indicator (Blue LED)
  • 8. KEY: Button to switch baud rate or disconnect Bluetooth
  • 9. ANT: External antenna interface

4.2 CP11 Adapter (for Computer Model T2)

The CP11 adapter is a USB device used for computer connections:

  • 1. USB Interface: Connects to computer.
  • 2. KEY: Button to switch baud rate or disconnect Bluetooth.
  • 3. WORK: Work status light (Red LED).
  • 4. TX: Data sending indicator (Green LED).
  • 5. RX: Data receiving indicator (Blue LED).
CP24 Hardware Description and Indicators
Figure 3: CP24 Hardware Construction and Indicator Lights

5. Setup Instructions

5.1 Antenna Installation

Screw the provided rubber stick antenna onto the ANT interface of the CP24 adapter.

5.2 Wiring Method

Connect the CP24 adapter to your RS485 device and power supply using the RJ45 to 4P 5.0mm terminal block:

  • Connect A+ and B- to the corresponding RS485 data lines of your device.
  • Connect VCC to your DC5-36V power supply positive terminal.
  • Connect GND to the power supply ground.
CP24 Wiring Diagram
Figure 4: CP24 Wiring Method and Communication Diagram

5.3 Baud Rate Adjustment

The default baud rate is 9600 bps. To change it:

  1. Ensure the CP24 (or CP11) is powered on but not actively connected via Bluetooth.
  2. Double-click the KEY button on the CP24 adapter (or CP11 adapter).
  3. The WORK status indicator (Blue for CP24, Red for CP11) will flash a certain number of times, indicating the new baud rate:
    • 1 flash: 2400 bps
    • 2 flashes: 4800 bps
    • 3 flashes: 9600 bps (Default)
    • 4 flashes: 19200 bps
    • 5 flashes: 38400 bps
    • 6 flashes: 57600 bps
    • 7 flashes: 115200 bps
  4. Repeat the double-click process until the desired baud rate is set.

6. Operating Instructions

6.1 Mobile Phone Connection (Model T1)

  1. App Download:
    • For iOS: Search for "DX-SMART" in the App Store and download the application.
    • For Android: Download the "DX-SMART" App from the official website (en.szdx-smart.com) or your phone's default app store.
  2. Connect the CP24: Connect the CP24 adapter to your RS485 device as per the wiring instructions.
  3. Pairing: Open the "DX-SMART" App on your mobile phone. Ensure Bluetooth is enabled. The app will search for available Bluetooth devices. Select your CP24 device (usually named "RS232/RS485").
  4. Control: Once successfully connected, navigate to the "Transmission" section within the app to control your 485 devices wirelessly.
Mobile Phone App Interface
Figure 5: Mobile Phone App Interface for CP24 Control

6.2 Computer Connection (Model T2)

  1. Driver Installation: Download and install the 'CH341' driver from the official website (en.szdx-smart.com) onto your computer.
  2. Connect CP11: Plug the CP11 Bluetooth adapter into a USB port on your PC.
  3. Connect CP24: Connect the CP24 adapter to your RS485 device.
  4. Serial Port Software: Open your preferred serial port debugging software (e.g., UartAssist). Select the correct COM port corresponding to the CP11 adapter. Configure the serial port parameters (default: 9600bps, 8 data bits, no parity, 1 stop bit).
  5. Connection: The CP11 adapter will actively search for the CP24 Bluetooth converter. A long blue light on the CP11 indicates a successful connection, and data can be exchanged.
Computer Debugging Setup
Figure 6: Computer Debugging Setup with CP11 and CP24

6.3 Wireless Communication Between Devices (Model T3)

For device-to-device wireless data communication, use two CP24 adapters configured as Master and Slave:

  1. Connect the first CP24 (configured as Master) to Device 1 via the RS485 interface.
  2. Connect the second CP24 (configured as Slave) to Device 2 via the RS485 interface.
  3. The CP24 Master will actively search for and connect to the CP24 Slave.
  4. Once connected, data interaction between the two RS485 devices can be carried out wirelessly.
Wireless Communication Diagram
Figure 7: Wireless Communication Between Devices Diagram

7. Applications

The CP24 adapter can be used in various industrial and automation scenarios:

  • PLC Programming: Update PLC programs via PC wirelessly.
  • Inverter Equipment: Set inverter parameters using a mobile phone.
  • Lift Control: Computer setting of lift parameters.
  • Servo Motors: Set servo motor parameters on mobile phones.
  • Textile Machinery: Configure parameters of textile machines via computer.
  • Touch Panels: Control PLCs connected to touch screens.
Bluetooth-RS485 Conversion Applications
Figure 8: Common Applications of CP24 Adapter

8. Specifications

ParameterValue
Bluetooth NameRS232/RS485
BLE UUIDSERVICE UUID: FFEO, NOTIFY/WRITE UUID: FFE1, WRITE UUID: FFE2
Serial Port Default9600bps/8/n/1 (Baud rate/Data bits/No parity/Stop bits)
Power SupplyDC5-36V
Interface TypeRJ45 Interface
CP24 Dimensions60 x 27.8 x 16.4 mm
CP11 Dimensions67 x 25 x 10 mm
Antenna Length108 mm
Operating Temperature-40°C to +85°C
Max RS485 DevicesUp to 32 devices
Max RS485 Distance1200 meters (at 9600bps)
RS485 Working ModePoint-to-point half-duplex, Point-to-multipoint half-duplex, Automatic direction control

9. Troubleshooting

  • Device not powering on: Check power supply connections (VCC, GND) and ensure the voltage is within the DC5-36V range.
  • Cannot connect via Bluetooth: Ensure the CP24 is powered on, Bluetooth is enabled on your mobile/PC, and you are within the communication range. Verify the correct app/driver is installed.
  • Data transmission issues:
    • Check if the baud rate of the CP24 matches that of your RS485 device.
    • Verify RS485 A+ and B- connections are correct.
    • Ensure the RS485 device is functioning properly.
    • Check for interference if communication distance is shorter than expected.
  • CP11 not recognized by PC: Ensure the CH341 driver is correctly installed. Try a different USB port.
  • App not finding CP24: Restart the app and ensure location permissions are granted if required by your OS for Bluetooth scanning.

10. User Tips

  • For optimal wireless range, ensure the antenna is securely attached and positioned in an open area, away from large metal objects or other sources of interference.
  • Always match the baud rate of the CP24 adapter to the baud rate of your RS485 device for successful communication.
  • When using the CP11 adapter with a PC, ensure the correct COM port is selected in your serial communication software.
  • For critical applications, test the wireless connection and data integrity thoroughly before deployment.

11. Support and Resources

For further assistance, technical support, or to download necessary software and drivers, please refer to the following resources:

Please note that the PDF manual can be found here for comprehensive details.

© 2024 PDDAXLQUE. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.