1. Product Overview
The E-ACE Tire Pressure Monitoring System (TPMS) is designed to enhance driving safety by providing real-time monitoring of tire pressure and temperature. This system offers advanced warning of abnormal tire conditions through audible alerts and flashing icons, helping to prevent traffic accidents and ensure the safety of drivers and passengers.
Figure 1: E-ACE TPMS Monitor and External Sensors
Key Features:
- Real-time monitoring of tire pressure and temperature.
- Audible and visual alerts for abnormal tire conditions.
- Solar charging capability for the monitor unit.
- USB charging interface for additional power.
- Low power consumption design.
- Available with K01 External Sensors (easy and convenient installation) or K02 Internal Sensors (more accurate data, longer battery life).
Figure 2: Monitor Unit Features
Figure 3: Internal vs. External Sensor Comparison
| Feature | Internal Sensor | External Sensor |
|---|---|---|
| Accuracy | Accurate pressure/temperature data | Accurate pressure/temperature data with slight error |
| Inflation/Deflation | Does not require disassembly | Needs to be disassembled |
| Battery Life | About 5-6 years | About 2-3 years |
2. Specifications
| Attribute | Value |
|---|---|
| Brand Name | E-ACE |
| Model Name | K01/K02 |
| Item Type | Alarm Systems & Security |
| Special Features | Solar Energy |
| Material | Plastic |
| Voltage | 5V |
| Is Batteries Included | Yes |
| Item Weight | 0.4 kg |
| Item Height | 26 mm |
| Item Width | 81 mm |
| Item Length | 77 mm |
| Package Length | 24 cm |
| Package Width | 16 cm |
| Package Height | 6 cm |
| Package Weight | 0.209 kg |
| Origin | Mainland China |
| Certification | RoHS, FCC, eec, CE, CCC, CC |
| Default Tire Pressure Unit | BAR |
| Default Temperature Unit | °C |
| Default Upper Tire Pressure Limit | 3.2 bar |
| Default Lower Tire Pressure Limit | 1.8 bar |
| Default Temperature Alarm Value | 68°C |
Figure 4: Monitor Unit Dimensions and Interface
Figure 5: Sensor Environmental Adaptability
3. Package Contents
The package typically includes the following items:
- 1 x E-ACE TPMS Monitor Unit (Solar Powered)
- 4 x Tire Pressure Sensors (External or Internal, depending on model)
- 1 x USB Charging Cable
- 1 x Small Wrench (for external sensors)
- 4 x Anti-theft Nuts (for external sensors)
- 1 x User Manual (this document, also available as PDF)
Video 1: Product Unboxing and Overview
4. Installation Instructions
4.1. External Sensor Installation (K01 Model)
Before installing external sensors, ensure the host unit is powered on.
- Screw the anti-theft nut onto the valve nozzle first.
- Install the sensor onto the valve according to its designated position (e.g., FL for Front Left, FR for Front Right, RL for Rear Left, RR for Rear Right) and tighten it.
- Screw the anti-theft nut counterclockwise against the sensor.
- Use the provided wrench to tighten both the sensor and the anti-theft nut counterclockwise to secure them.
Figure 6: Screw in the anti-theft nut
Figure 7: Tighten the sensor
Figure 8: Screw anti-theft nut against sensor
Figure 9: Tighten with wrench
Important: If no pressure is displayed on the host for a specific position, reinstall the sensor for that position.
4.2. Built-in Sensor Installation (K02 Model)
Before installing built-in sensors, ensure the main unit is powered on.
- Install the sensor into the tire according to its designated position.
- Replace the original car valve with the new sensor valve.
- Inflate the tires sequentially after installation. Ensure the air is filled when the main unit is turned on.
4.3. Monitor Unit Placement
Apply the adhesive to the bottom of the main unit. Place the monitor in a suitable position on the left side of the center console, ensuring it has access to sunlight for solar charging and is visible to the driver.
Figure 10: Example Monitor Placement
5. Operating the Device
5.1. Interface and Display Description
The monitor unit features a clear display showing real-time tire pressure, temperature, and system status.
Figure 11: Monitor Interface Labels
- Power/Left button
- SET button
- Right button
- Solar energy
- Solar icon
- Tire pressure units
- Tyre temperature
- Tire Pressure
- Temperature unit
- Battery status
- Clock (if applicable)
5.2. Button Function Description
- USB Charging Port: Used for charging the receiver unit.
- Power/Left Button:
- Short press (standby mode): Adjusts brightness.
- Long press: Turns the unit on/off.
- In menu mode: Navigates left or switches menu options.
- Right Button:
- Short press (standby mode): Adjusts brightness.
- Long press: Turns off the alarm sound.
- In menu mode: Navigates right or switches settings.
- SET Button (M Menu Button/Confirm Button):
- Long press (standby mode): Enters menu mode.
- Short press (in menu mode): Confirms the selected parameter.
5.3. Basic Functions
- The factory default tire pressure unit is BAR, the temperature unit is °C.
- The default upper limit of tire pressure is 3.2 bar, and the lower limit is 1.8 bar.
- The default temperature alarm value is 68°C.
- The backlight brightness automatically adjusts based on ambient light intensity. It can also be adjusted manually using the left and right buttons.
6. Function Settings (Advanced Users Only)
Note: It is not recommended for non-professionals to change these settings. If settings are not modified, the system will operate with factory defaults. If there is no operation within 30 seconds in menu mode, the system will automatically exit without saving changes.
6.1. Unit Setting (Factory Default: Bar, °C)
- In standby mode, long press the "SET button" for 3 seconds to enter the system setting state. The Bar icon will appear in the lower left corner.
- Press the "SET button" to enter the operable setting state.
- Use the "Left and Right Buttons" to select between Psi or Bar units.
- Press the "SET button" to confirm the desired unit.
- To set the temperature unit, long press the "SET button" for 3 seconds to enter the system setting state, then press the "Right button" once to enter the temperature unit setting.
- Press the "SET button" to enter the operable setting state.
- Use the "Left and Right Buttons" to select between °C or °F units.
- Press the "SET button" to confirm the desired unit.
Figure 12: Unit Setting (BAR)
Figure 13: Unit Setting (PSI)
6.2. Time Setting (For models with clock function only)
- In standby mode, long press the "SET button" for 3 seconds to enter the system setting state.
- Press the "Right button" twice to enter the time setting.
- Short press the "SET button" twice; the hour number will flash.
- Use the "Left and Right Buttons" to adjust the hours.
- After setting the hours, short press the "SET button" to set the minutes.
- Adjust the minutes using the "Left and Right Buttons".
- Long press the "SET button" to exit the setting after the time is complete.
Figure 14: Time Setting
6.3. Changing Tire Pressure Limits
- Long press the "SET button" for 3 seconds in standby mode to enter the system setting state.
- Press the "Right button" twice to enter the maximum air pressure setting.
- Press the "SET button" once; the air pressure number will flash.
- Use the "Left and Right Buttons" to set the maximum air pressure.
- After setting, long press the "SET button" to exit.
- To set the lower limit, long press the "SET button" for 3 seconds in standby mode.
- Press the "Right button" 3 times to enter the lower limit setting.
- Press the "SET button" once; the barometric pressure number will flash.
- Use the "Left and Right Buttons" to set the lower limit parameter value.
- Long press the "SET button" to exit after setting.
Figure 15: Upper Pressure Limit Setting
Figure 16: Lower Pressure Limit Setting
6.4. Changing Upper and Lower Temperature Limits
- In standby mode, long press the "SET button" for 3 seconds to enter the system setting state.
- Press the "Right button" 4 times to enter the tire temperature upper limit setting.
- Short press the "SET button" once; the tire temperature number will flash.
- Use the "Left and Right Keys" to set the highest upper limit tire temperature.
- After the setting is completed, long press the "SET button" to exit.
Figure 17: Upper Temperature Limit Setting
6.5. Single Sensor Replacement (Pairing)
To replace a sensor, first remove the old sensor and install the new one.
- In standby mode, long press the "SET button" for 3 seconds to enter the system setting state.
- Press the "Right button" 5 times to enter the pairing selection mode.
- Press the "SET button" once; the '0' number on the interface will flash. This '0' represents the front left wheel by default.
- Use the "Left and Right Keys" to select the position of the sensor to be replaced (0=Front Left, 1=Front Right, 2=Rear Left, 3=Rear Right).
- After selecting the position, press the "SET button" to make the number flash.
- Install the sensor on the tire. If there is any change in the number, long press the "SET button" to exit.
Figure 18: Sensor Pairing Position 0 (Front Left)
Figure 19: Sensor Pairing Position 1 (Front Right)
Figure 20: Sensor Pairing Position 2 (Rear Left)
★ For built-in sensors: Inflate and deflate the tire when the number below flashes during pairing.
★ During this pairing process, any sensor can be matched to any position.
6.6. Restore Factory Settings (Re-pairing)
- While the unit is powered on, press and hold the "SET button" for 3 seconds to enter the settings.
- Press the "Left button" again to enter item 7.
- Press the "SET button" twice to reset the machine and restore factory settings.
- At this point, the system will search for sensors again.
- To update a sensor, install the new sensor on the valve in order, or drive the car at a speed of 30 kilometers per hour or more after resetting.
- After driving for about 10-30 minutes, the host will automatically search for sensor signals. Once all 4 sensors are found, pairing is complete.
Figure 21: Factory Reset Display
After restoring the factory settings, any previously manually set data will revert to the factory defaults.
7. Maintenance
7.1. Replacing External Sensor Batteries (K01 Model)
When replacing the battery of an external sensor (Button CR1632, working temperature: -30°C to 80°C), please disassemble and install one by one. Do not mix or disassemble multiple sensors at the same time.
- Before disassembling, prepare a nut wrench. Turn the nut clockwise to separate it from the sensor, then remove the sensor counterclockwise.
- Use a wrench to unscrew the upper cover of the sensor in a counterclockwise direction.
- Carefully remove the old battery from the battery holder. Please dispose of batteries responsibly according to environmental protection guidelines.
- Distinguish the positive and negative positions (positive "+" facing upwards). Install a new CR1632 lithium battery.
- Screw on the upper cover of the sensor, and then use a wrench to tighten it clockwise.
Note: The images for battery replacement are not available in the provided resources. Please refer to the physical product for visual guidance.
8. Troubleshooting
- Q: The display shows no pressure for a specific sensor or readings are inaccurate.
-
- A: For external sensors, ensure the sensor is correctly installed and tightened. If no pressure is displayed, try reinstalling the sensor for that position.
- A: For both sensor types, if a sensor doesn't synchronize initially, unscrew it (external) or re-seat it (internal, if possible) and then re-install/re-pair after a short interval.
- A: Ensure the monitor unit is powered on and within range of the sensors.
- A: If readings consistently appear lower than actual pressure, consider recalibrating the system by performing a factory reset and re-pairing all sensors.
- Q: The device does not automatically turn on/off.
-
- A: The device is designed to enter a sleep mode when stationary and wake up with movement. If it's not responding, check the battery level.
- A: Ensure the solar panel is exposed to light for charging.
- Q: Can I use this TPMS for van tires that require 4.2 bar pressure?
-
- A: The factory default upper limit for tire pressure is 3.2 bar. While some settings can be adjusted, exceeding the recommended operating range may affect accuracy and system performance. Please verify the adjustable range in the settings menu.
- Q: What is the battery life of the sensors?
-
- A: Internal sensors typically have a battery life of about 5-6 years. External sensors have a battery life of about 2-3 years.
- Q: Can individual sensors be replaced if damaged or if the battery runs out?
-
- A: Yes, individual sensors can be replaced and re-paired with the main unit. Refer to section 6.5 for "Single Sensor Replacement (Pairing)". External sensor batteries can also be replaced (see section 7.1).
9. User Tips
- Initial Sensor Synchronization: If a sensor doesn't synchronize immediately after installation, try unscrewing it (external) or re-seating it (internal) and then re-installing/re-pairing after a brief pause.
- Solar Charging: The solar charging feature works effectively. Ensure the monitor unit is placed where it receives adequate sunlight for optimal charging.
- Automatic Operation: The device is designed to automatically turn off when parked and turn on with vehicle movement, conserving battery life.
- Sensor Choice: Consider the trade-offs between external and internal sensors. External sensors are easier to install and maintain (battery replacement), while internal sensors offer more accurate data and longer battery life, but require tire disassembly for installation/maintenance.
10. Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation or contact your retailer.
A PDF version of the user manual is available for download: View User Manual (PDF)