1. Introduction
This Neoeco Airbrush compressor kit is an ultra-quiet miniature airbrush compressor kit, ideal for light-use, low-pressure applications with a working pressure of 4-25 psi. It is designed for precision tasks such as model spraying, painting, cake decoration, advertising painting, furniture repair, beauty makeup, and temporary tattoos.
This airbrush kit is versatile and comes with a plug adapter suitable for various regions. Weighing less than 1 kilogram (2.2 pounds), it is highly portable. The integrated airbrush holder provides a safe and convenient place to rest your airbrush when not in use.
The compressor features a stepless pressure control knob, allowing you to subtly adjust the air pressure from 0 to 30 PSI for the perfect amount. It also includes an auto start/stop function, where the compressor activates according to the airbrush trigger's action, making it smarter and easier to use.

Figure 1.1: Complete Neoeco Airbrush Kit Contents

Figure 1.2: Various Applications of the Airbrush Kit
2. Setup and Assembly
Follow these steps to set up your Neoeco Airbrush Kit:
- Connect the Air Hose: Securely attach one end of the air hose to the compressor's 1/8" hose interface and the other end to the airbrush.
- Insert the Airbrush Holder: If not already installed, place the airbrush into the designated holder on the compressor for convenient resting.
- Plug in the Adapter: Connect the power adapter to the compressor's charging socket and then plug it into a suitable power outlet.
- Prepare Your Workspace: Ensure the compressor is placed in a dry, clean, and well-ventilated area. Keep children away from the device.

Figure 2.1: Assembly Steps (Connecting hose, inserting holder, plugging adapter)

Figure 2.2: Air Compressor Component Overview
3. Operating Instructions
3.1. Basic Operation
- Turn On: Press the ON/OFF button on the compressor. The indicator light will illuminate.
- Adjust Air Pressure: Rotate the Stepless Control Knob to set the desired air pressure. The compressor can deliver 0-30 PSI.
- Prepare Paint: Dilute your liquid paint to the appropriate consistency for airbrushing. Pour the diluted paint into the airbrush's fluid cup (7cc capacity). Do not overfill the cup to prevent spills or blocking ventilation holes.
- Start Spraying:
- Gently press down on the airbrush trigger for air flow.
- Pull the trigger back to release paint. The further you pull back, the more paint will be released.
- Adjust the distance between the airbrush needle cap and your work surface to control the spray width.
- Stop Spraying: Release the trigger to stop paint flow, then release the trigger completely to stop air flow. The compressor will automatically stop when the airbrush trigger is fully released.

Figure 3.1: Compressor Stepless Pressure Control (0-30 PSI)

Figure 3.2: Airbrush Trigger Operation (Press for air, pull back for paint)

Figure 3.3: Ergonomic Design for Comfortable Grip
4. Maintenance
Proper cleaning and maintenance are crucial for the longevity and performance of your airbrush kit. Clean your airbrush immediately after every use and before changing colors.
4.1. Simple Cleaning (Between Color Changes or After Light Use)
- Empty any remaining paint from the fluid cup.
- Add water or a suitable airbrush cleaning solution into the fluid cup.
- With the airbrush running, place your index finger over the airbrush nozzle to block airflow. This will cause bubbles to appear in the fluid cup, back-flushing the airbrush. Flick the trigger back and forth for 8-15 seconds.
- Spray the cleaning liquid into a waste container or a dedicated cleaning pot (not included in the kit) until the spray runs clear.

Figure 4.1: Simple Cleaning Procedure
4.2. Thorough Needle & Nozzle Cleaning (After Each Session or When Clogged)
- Unscrew the Handle: Carefully unscrew the airbrush handle (No.16 in diagram).
- Loosen the Needle Chucking Nut: Loosen the needle chucking nut (No.15).
- Pull Out the Needle: Gently pull the needle out from the front of the airbrush. Wipe it clean with a soft cloth dampened with cleaner. Be careful not to bend the needle.
- Unscrew the Nozzle Cap and Nozzle: Carefully unscrew the nozzle cap (No.1) and then the nozzle (No.3).
- Clean Components: Use the provided cleaning brushes and reamer to clean the paint passage, inside the nozzle, and the needle guide thoroughly.
- Reassemble: Carefully reassemble the airbrush in reverse order. Ensure the needle is inserted gently and the chucking nut is tightened just enough for the needle to follow the trigger action.

Figure 4.2: Detailed Needle and Nozzle Cleaning Steps

Figure 4.3: Airbrush Exploded View for Component Identification
5. Troubleshooting
Here are solutions for common airbrush faults:
5.1. Paint Bubbling in Fluid Cup, But No Paint Sprays Out
Cause: This is typically caused by a loose nozzle cap or nozzle, or a missing O-ring for the nozzle cap or nozzle.
Solution:
- Carefully tighten the nozzle and nozzle cap. Do not overtighten to avoid damage.
- If an O-ring is missing, you can temporarily seal it by wrapping raw material tape around the connection two times. For long-term use, replace the O-ring or use a special airbrush sealant.
5.2. Air Sprays Out, But No Paint
Cause: The paint concentration is too high, affecting its fluidity, leading to little or no paint flow, or the paint has solidified quickly.
Solution:
- Unscrew the tail handle and needle chucking nut.
- Pull the needle back out, then push it forward to its original position and tighten the needle chucking nut.
- Check if the middle of the fluid cup lid is blocked. If it is, use a needle to clear it.
- Ensure your paint is properly diluted for airbrush use.
6. Specifications
| Feature | Specification |
|---|---|
| Product Name | Airbrush Compressor Kit |
| Model Number | NCT-SJ33B500K-S1 |
| Material | Aluminum, Nylon, Plastic |
| Input Voltage | 100-240V |
| Output Voltage | 12V |
| Gas Flow | 12 LPM |
| Max Gas Pressure | 30 PSI |
| Auto Start/Stop | Yes |
| Hose Diameter | G 1/8 |
| Hose Length | 1.8m / 70.9in |
| Air Compressor Weight | 435g / 1.0lb |
| Air Compressor Size | 115 x 95 x 50mm |
| Nozzle Diameter | 0.3mm (includes 0.2mm, 0.5mm options) |
| Cup Volume | 7cc (includes additional cups) |
| Power Type | Pneumatic |
| Feed Type | Gravity |
7. User Tips
- Dilution is Key: Always dilute your paint to the correct consistency for airbrushing. Experiment with water or appropriate thinners until you achieve a smooth, consistent spray.
- Clean Immediately: To prevent clogging and ensure optimal performance, clean your airbrush thoroughly right after each use, especially when switching colors or finishing a session.
- Practice Makes Perfect: If you're new to airbrushing, start by practicing with water on scrap material to get a feel for the trigger control and spray patterns.
- Compressor Auto-Stop: Take advantage of the compressor's auto start/stop feature; it will only run when you press the airbrush trigger, saving power and reducing noise.
- Explore Resources: The manufacturer often provides online guides and videos. Refer to the included PDF manual for more detailed instructions and tips.
8. Warranty and Support
For warranty information, technical support, or any issues not covered in this manual, please refer to the official seller's website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
For a more detailed visual guide and additional information, please refer to the official user manual PDF: View User Manual (PDF).