Introduction
The FIFINE AmpliGame SC3 is a compact and powerful 4-channel RGB audio mixer designed for gamers, streamers, and podcasters. It features an XLR microphone interface, individual channel controls, customizable sound effects, and vibrant RGB lighting to enhance your audio experience and setup aesthetics. This manual provides essential information for setting up, operating, and maintaining your SC3 mixer.
Important Safety Information
- Read all instructions carefully before use.
- Keep the device away from water, moisture, and extreme temperatures.
- Do not attempt to disassemble or modify the device. This will void the warranty.
- Use only the provided cables and accessories.
- Avoid placing the device near heat sources or in direct sunlight.
- Clean the device with a soft, dry cloth. Do not use liquid cleaners.
Package Contents
Please check that all items are present in your package:
- FIFINE AmpliGame SC3 Audio Mixer
- USB-C to USB-C Cable
- 3.5mm Audio Cable (Jack Cable)
- User Manual (this document and a detailed PDF version)
Note: An XLR microphone cable is not included and must be purchased separately if you plan to use an XLR microphone.
Product Overview
Familiarize yourself with the various controls and ports on your AmpliGame SC3 mixer.
Front Panel Controls:
- 48V Button: Activates 48V phantom power for condenser microphones.
- Electric Tone Button: Engages auto-tune effect.
- Custom A/B/C/D Buttons: Customizable sound effect buttons.
- Mic Fader: Adjusts microphone input volume.
- Line In Fader: Adjusts Line In volume.
- Headphone Fader: Adjusts headphone monitoring volume.
- Line Out Fader: Adjusts Line Out volume.
- Mute Buttons (Mic, Line In, Line Out): Mutes respective audio channels.
- Mic Monitor Button: Toggles microphone monitoring through headphones.
- RGB Control Button: Cycles through RGB lighting modes and colors.
- Change Voice Button: Activates voice changing effects (Male, Female, Robot, Monster Baby, Elder).
Rear Panel Ports:
- OTG/PC Port: USB-C connection for PC, Mac, or mobile devices.
- Line Out Port: 3.5mm output for speakers or other audio devices.
- Headphone Port: 3.5mm output for headphones.
- Line In Port: 3.5mm input for external audio sources.
- Mic Port (XLR/1/4"): Combo input for XLR or 1/4" (6.35mm) microphones.
Setup Guide
- Connect to Computer/Device: Use the provided USB-C to USB-C cable to connect the SC3 mixer's OTG/PC port to your computer (PC/Mac) or compatible mobile device. The mixer is plug-and-play and should be recognized automatically.
- Connect Microphone:
- For XLR Microphones: Connect your XLR microphone to the Mic port using an XLR cable (not included). If using a condenser microphone, press the '48V' button to activate phantom power.
- For 1/4" (6.35mm) Microphones: Connect your 1/4" microphone to the Mic port.
The XLR microphone interface provides 48V phantom power and 50dB gain for improved audio performance. - Connect Headphones: Plug your headphones into the Headphone port for monitoring your audio.
- Connect Speakers (Optional): If you wish to output audio to external speakers, connect them to the Line Out port using a 3.5mm audio cable.
- Connect External Audio Source (Optional): To bring in audio from another device (e.g., a phone), connect it to the Line In port using a 3.5mm audio cable.
Operating Instructions
Channel Volume Control:
Use the dedicated faders to adjust the volume levels for each channel:
- Mic Fader: Controls the input volume of your microphone.
- Line In Fader: Controls the volume of the audio source connected to the Line In port.
- Headphone Fader: Controls the volume of your headphones.
- Line Out Fader: Controls the output volume to external speakers or recording devices.
Mute Functions:
Press the corresponding MUTE button to instantly silence the Mic, Line In, or Line Out channels. Press again to unmute.
Microphone Monitoring:
Press the Mic Monitor button to toggle whether your microphone audio is heard through your headphones. This is useful for real-time feedback.
Sound Effects and Voice Changing:
- Electric Tone: Press the 'ELECTRIC' button to apply an auto-tune effect to your voice.
- Change Voice: Press the 'CHANGE VOICE' button to cycle through various voice effects such as Male, Female, Robot, Monster Baby, and Elder.
- Custom Sound Effects (A, B, C, D): These buttons allow you to record and play back custom audio clips, each up to 15 seconds in length. To record, press and hold a custom button until it blinks, speak into your microphone, then press the button again to stop recording. Press briefly to play back.
RGB Lighting Control:
Press the RGB Control button to cycle through 5 different RGB lighting modes and more than eight color options, allowing you to customize the aesthetic of your mixer.
Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to wipe the surface of the mixer. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.
- Storage: When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Care: Avoid bending or crimping cables excessively. Always grasp the plug, not the cable, when disconnecting.
Troubleshooting
- No sound output:
- Ensure all cables are securely connected. Check that the mixer's faders (Mic, Line In, Headphone, Line Out) are not at their lowest setting and that mute buttons are not engaged. Verify your computer's sound settings are configured to use the FIFINE SC3 as the input/output device.
- Microphone not working:
- Confirm the microphone is correctly plugged into the Mic port. If using a condenser microphone, ensure the '48V' phantom power button is activated. Check the Mic fader level. Test with another microphone or cable if possible.
- Hearing a slight hiss or background noise in headphones:
- Check all audio connections for loose cables. Reduce the microphone gain or input volume if it's set too high. Try using different headphones or a different 3.5mm cable. This can sometimes be caused by electrical interference or impedance mismatches.
- Custom sound effects not recording/playing:
- Ensure your microphone is properly connected and its volume is adequate. Follow the recording procedure: press and hold the custom button until it blinks, speak, then press again to stop. If the issue persists, try resetting the mixer by disconnecting and reconnecting the USB cable.
- RGB lights are not working or stuck:
- Press the RGB Control button multiple times to cycle through modes. If unresponsive, disconnect and reconnect the USB power to reset the device.
Specifications
| Model Number | SC3 |
|---|---|
| Brand Name | FIFINE |
| Type | Mixer |
| Origin | China |
| Certifications | CE, FCC, KC |
| Battery Included | No |
| Phantom Power | 48V (switchable) |
| XLR Gain | Up to 50dB |
| Channels | 4 |
| Dimensions (L x W x H) | 22 cm x 17 cm x 6 cm (approx.) |
| Weight | 0.544 kg (approx.) |
User Tips
- Optimize Microphone Performance: For dynamic microphones like the Maono PD200X, using the XLR connection can significantly reduce EMI interference compared to a USB connection, resulting in cleaner audio.
- Independent Audio Control: The SC3 offers independent volume controls for headphones and line out, which is beneficial for managing separate audio streams for monitoring and broadcasting.
- Intuitive for Beginners: The mixer is designed to be user-friendly and intuitive, making it suitable even for those new to audio mixing.
- Utilize Custom Sound Effects: Make full use of the four custom buttons to record and trigger short audio clips (up to 15 seconds each) for intros, outros, sound alerts, or other creative uses during streams or podcasts.
- XLR Cable Recommendation: An XLR cable is essential for connecting XLR microphones and is not included in the package. Investing in a good quality XLR cable is recommended for optimal performance.
Frequently Asked Questions (FAQ)
- Q: Is a microphone cable included with the mixer?
- A: No, an XLR microphone cable is not included and must be purchased separately if you plan to use an XLR microphone.
- Q: Can I connect the FIFINE SC3 to a smartphone or iPad?
- A: Yes, the mixer supports connectivity with mobile devices via the OTG/PC USB-C port. An appropriate adapter may be required for some smartphone or tablet models.
- Q: Is the mixer compatible with gaming consoles like PS5?
- A: While it may function as a general USB audio device with some consoles, full compatibility and access to all features can vary. Please consult your console's documentation for external audio device support.
- Q: Can the RGB lights be turned off?
- A: Yes, the RGB lighting is controllable via the RGB Control button, allowing you to cycle through various modes and colors, including the option to turn them off.
- Q: I hear a slight hiss or whispering sound in my headphones. What should I do?
- A: First, ensure all connections are secure. Try reducing the microphone gain or input volume on the mixer. You might also try different headphones or a different 3.5mm audio cable. This issue can sometimes be related to electrical interference or impedance mismatches.
Warranty and Support
FIFINE products are designed for reliability and performance. For detailed warranty information and technical support, please refer to the official FIFINE website or the comprehensive user manual PDF.
A detailed user manual is available in PDF format for further reference: Download PDF User Manual