1. Safety Attention
When the power is on, the soldering iron tip temperature ranges from 100°C-450°C (212°F-842°F). Improper use can lead to burns or fire. Please observe the following safety guidelines strictly:
- Do not touch the soldering iron tip or any metal parts near it.
- Do not use the soldering station near flammable materials.
- The soldering iron tip is extremely hot. Always turn off the power after use.
- When changing parts, turn off the machine and allow the tip to cool down completely.
- This product uses a rated voltage and frequency (refer to the label on the back of the machine).
- Do not use this product if it is damaged, especially if the power cable is compromised.
- This product uses a three-wire grounding plug and must be inserted into a three-hole grounded socket. If an extension cord is needed, use a grounded three-wire power cord.
- Do not use the soldering iron for any purpose other than welding.
- Do not knock the soldering tip on the workbench to clean it, as this can severely damage the tips.
- When replacing parts, always use original factory components.
- Do not tamper with the soldering iron or its components without proper safety precautions.
- Do not wet the soldering iron, and do not use it with wet hands.
- Welding produces smoke; ensure adequate ventilation in your work environment.
- Do not allow children to operate or touch this soldering station, as they may not be aware of the dangers of electrical products. Store it in a place inaccessible to children.
2. Product Overview
The AIFEN A5 Soldering Station is designed for high-speed heating and rapid temperature recovery, making it suitable for various electronic welding and rework tasks. It features a universal handle compatible with JBC C210, C245, and C115 soldering tips.

AIFEN A5 Soldering Station with handle and tips, highlighting 120W power, quick heat-up, and handle control compatibility.
Components

Labeled diagram of the AIFEN A5 Soldering Station showing temperature display, adjustment buttons, switch button, handle connection, and cleaning sponge.
- Handle: Ergonomic design for comfortable use.
- Temperature Display: Digital screen showing the current or set temperature.
- Temperature Adjustment Buttons (▲/▼): Used to increase or decrease the temperature.
- Switch Button: Power on/off for the station.
- Handle Connection: Port for connecting the soldering iron handle.
- Cleaning Sponge: For cleaning the soldering tip.
3. Setup Instructions
- Connect the Handle: Ensure the power is off. Connect the soldering iron handle to the handle socket on the main unit.
- Install Heating Core/Tip: Insert the required heating core (soldering tip) into the handle.
- Position the Station: Place the soldering station on a stable surface and rest the handle on its designated holder.
- Connect Power: Plug the power cord into a grounded electrical outlet.
- Power On: Turn on the power switch. The display window will show "---", indicating that the soldering station is in standby mode.
4. Operating Instructions
4.1. Temperature Setting
- Increasing Temperature: Press the "▲" button once to increase the set temperature by 1°C. For rapid increase, press and hold the "▲" button until the desired temperature is reached, then release.
- Decreasing Temperature: Press the "▼" button once to decrease the set temperature by 1°C. For rapid decrease, press and hold the "▼" button until the desired temperature is reached, then release.
4.2. Celsius and Fahrenheit Conversion
To switch between Celsius and Fahrenheit display:

Hold the "▲" button while powering on the unit to toggle between Celsius and Fahrenheit.
4.3. Temperature Calibration
If calibration is needed:

Simultaneously press and hold the "▲" and "▼" buttons while powering on the unit to enter the ±99 degree temperature calibration mode. Use the "▲" or "▼" button to adjust the value. The setting will automatically save and exit after 3 seconds of inactivity.
4.4. Standby Temperature Setting
To set the standby temperature:

With the main unit powered off, press and hold the "▼" button, then turn on the power. You will enter the standby temperature setting interface. Available standby temperatures are 0°C, 150°C, 180°C, and 200°C. Setting to 0°C will turn off the standby temperature function completely. The setting will automatically save and exit after 3 seconds.
4.5. Handle Control Operation (Note)
The AIFEN A5 is a standard version. The wire-controlled handle functions (handle temperature adjustment and handle control machine switch) described in some documentation are typically for the wire-controlled A2 version and are not available on this standard A5 model.
5. Maintenance
5.1. Soldering Tip Temperature
High temperatures can degrade the soldering tip's performance. Always choose the lowest possible temperature that allows for effective soldering. The AIFEN A5's excellent temperature recovery allows for efficient soldering at lower temperatures, protecting temperature-sensitive components.
5.2. Cleaning the Soldering Tip
- Regularly clean the soldering tip using a copper wire cleaning ball. Residues like oxide and carbide from flux can damage the tip, lead to poor soldering, and reduce heat conduction.
- When not in use, do not leave the iron at high temperature for extended periods. This can cause the solder on the tip to oxidize, significantly reducing its heat conduction capabilities.
- After use, clean the soldering tip and coat it with a fresh layer of tin to prevent oxidation.
5.3. Checking and Cleaning the Soldering Tip
Note: Do not use a file to remove oxide from the soldering tip.
- Set the temperature to 250°C (482°F).
- Once the temperature is stable, clean the tip with a cleaning sponge and inspect its condition.
- If the tinned part of the soldering iron contains black oxide, apply a new tin layer, then wipe the tip with a clean sponge until the oxide is completely removed. Re-tin the tip with a fresh layer.
- If the soldering tip is deformed or shows heavy rust, it must be replaced.
5.4. Heating Core Replacement
This soldering station uses a heating core integrated with the welding head. To replace:
- Ensure the power is off and the unit has cooled down.
- Directly unplug the old heating core.
- Plug in the new heating core.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | AIFEN-A5 |
| Origin | Mainland China |
| Input Voltage | AC100-240V 50/60Hz |
| Power | 120W |
| Maximum Power | 160W |
| Temperature Control Range | 100°C-450°C (212°F-842°F) |
| Certification | CE |
| Compatible Tips | 115/210/245 TIPS (JBC C210/C245/C115) |
7. User Tips
- The basic temperature calibration of this station is generally precise, but it can be corrected at any time if needed using the calibration function.
- Utilize the 'OFF' setting for standby temperature if you prefer the soldering iron to cool down completely when not in active use. The station is capable of bringing the iron back to operating temperature very quickly (within approximately 4 seconds).
- While the station itself is of good quality, some users suggest that the included handle and tips are basic. Consider upgrading to higher quality handles and tips for enhanced performance and longevity.
- The AIFEN A5 is versatile, performing well for delicate tasks with C210/C115 tips and more robust soldering work with C245 tips.
- Many users find the performance a significant upgrade compared to basic soldering irons.
8. Troubleshooting
This section will be updated with common troubleshooting steps. For immediate assistance, please refer to the Warranty/Support section.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
Additional Resources: A detailed user manual in PDF format is available for download. You can access it here.