Laiwen T005

Contents

Rechargeable Bluetooth Hearing Aids with APP Control

Model: T005 | Brand: Laiwen

Digital Sound Amplifier for Moderate to Severe Hearing Loss

Introduction

Thank you for choosing the Laiwen T005 Rechargeable Bluetooth Hearing Aids. This device combines advanced digital sound amplification with modern Bluetooth connectivity, allowing for APP control and use as a regular Bluetooth headset for music and calls. Designed for individuals with moderate to severe hearing loss, the T005 offers a comfortable and discreet solution to enhance your hearing experience.

Laiwen T005 Rechargeable Bluetooth Hearing Aids with charging case and smartphone app interface

Figure 1: Overview of the T005 Hearing Aids and APP Interface

Important Safety Precautions

⚠️ Warning: If you are younger than 18, do not use this device. You should consult an ear-nose-throat doctor (an ENT) for specialized care. Over-the-counter hearing aids are only for users who are age 18 or older.

The following section contains important safety information. Please read thoroughly before use.

  • Never attempt to disassemble, remodel, or repair the product yourself. This may cause injury.
  • Do not use an unnecessarily loud volume.
  • Do not expose this product to water, fire, or high temperatures. Contact with liquids may cause electric shock or fire.
  • Do not attempt to use with power outlets or outlet strips that would exceed the product's electrical rating.
  • Do not hit, crush, or use excessive force with the product. Handling roughly may cause damage or electric shock.
  • If you experience discomfort or notice any of the following, stop using the product immediately: unusual sounds, pain, or skin irritation. The product may cause unexpected accidents if used improperly.
  • Furthermore, the product contains small pieces. Keep out of reach of children to prevent choking hazards.

Package Contents

Ensure all items are present in your package:

  • 2 x T005 Wireless Bluetooth Hearing Aids (Left and Right)
  • 1 x Charging Case
  • 1 x USB Charging Cable (Type-C)
  • Multiple pairs of Silicone Ear Tips (various sizes)
  • 1 x Quick Start Manual (this document)
Contents of the T005 hearing aid package including earbuds, charging case, ear tips, charging cable, and manual.

Figure 2: T005 Package Contents and Quick Start Manual Diagram

Setup

1. Charging the Device

Before first use, fully charge the hearing aids and the charging case.

  1. Place the hearing aids into their respective slots in the charging case.
  2. Connect the USB charging cable to the charging port on the case and to a power source.
  3. The LED display on the charging case will indicate the charging status. A full charge is indicated by '100' on the display.
T005 charging case with earbuds inside, showing portable charging capabilities and battery life.

Figure 3: Portable Charging and Battery Information

2. Wearing Your Hearing Aids

  1. Remove the devices from the charging case and grasp them from the sides.
  2. Pinch the silicone ear tip with your fingers to compress it. It will expand once inserted, creating a snug fit.
  3. Insert the devices into your ear canal, gently twisting and rotating them to ensure a deep and secure fit.
Diagram showing how to wear the T005 earphone-type hearing aid and adjust volume for left and right ears.

Figure 4: Proper Wearing and Individual Ear Adjustment

3. Power On/Off

  • Automatic Power On/Off: The devices will automatically power on when taken out of the charging case and power off when placed back into the charging case.
  • Manual Power On: Press and hold the touch button on either earbud for 3 seconds.
  • Manual Power Off: Press and hold the touch button on either earbud for 5 seconds.

4. APP Installation

The T005 hearing aids are controlled via a dedicated mobile application. Please install the "Widersonic" app on your smartphone.

  • For iOS Devices (iPhone/iPad):
    1. Visit the website: https://apps.apple.com/cn/app/widersonic/id1577782600
    2. Alternatively, search for "Widersonic" on the App Store. The app icon is a stylized 'M'.
  • For Android Devices:
    1. Scan the QR code provided in the physical quick start manual or on the product packaging using your phone's camera or a QR code scanner app.
    2. The QR code will direct you to the download page (e.g., http://h5.mirasingad.top/). Follow the instructions to download and install the APK file.
    3. Note: Some users have reported difficulty finding the app on Google Play Store. The provided website or QR code is the recommended method for Android.

Video 1: Product Demonstration including APP Installation and Usage

5. Bluetooth Pairing

To connect your T005 hearing aids to your smartphone:

  1. Open the charging case and take out the hearing aids. They will automatically enter Bluetooth pairing mode.
  2. On your smartphone, go to Bluetooth settings.
  3. Select "T005" from the list of available devices and tap to connect.
  4. Once connected, you can use the hearing aids for listening to music, watching TV, and making calls.

Operating Instructions

Using the APP (Widersonic)

The "Widersonic" app allows you to customize your hearing experience.

  1. Connect the Device:
    • Open the app.
    • Press "Search device" and start scanning.
    • Ensure your hearing aids are powered on and have sufficient battery.
    • Once scanned, select the device's name ("T005-L" for left, "T005-R" for right) and choose the corresponding ear. This will take you to the main control page.
  2. Adjust Volume:
    • On the app's main page, navigate to the "Volume" tab.
    • Move the volume sliders to adjust the amplification level. You can adjust the left and right ear volumes independently. Select a comfortable volume for your needs.
  3. Adjust Program (Mode):
    • Navigate to the "Mode" tab.
    • The app offers different listening programs (e.g., Mode 1, Mode 2, Mode 3, Mode 4).
    • If you have an audiogram, select the mode that best matches your hearing profile. If not, choose the program that provides the most comfortable and clear sound for your environment.
    • Note: If both left and right ears are connected, changing a program in the app will change both devices simultaneously.
  4. Adjust Equalizer Band (Frequency):
    • Navigate to the "Frequency band" tab.
    • Move the sliders to adjust the gain for different frequencies (e.g., 500Hz, 1kHz, 2kHz, 3kHz, 4kHz). This allows for fine-tuning the sound to your specific hearing loss.

The T005 also supports listening to music, watching TV, and making calls via Bluetooth connection to your mobile phone.

Troubleshooting

Problem Possible Cause Solution
Hearing aids not powering on. Low battery; not properly seated in charging case. Ensure hearing aids and charging case are fully charged. Place them correctly in the case. Manually power on if needed.
Cannot connect to Bluetooth. Hearing aids not in pairing mode; Bluetooth off on phone; interference. Ensure hearing aids are out of the case and in pairing mode. Turn phone's Bluetooth off and on. Try resetting the hearing aids.
App cannot find or connect to devices. Bluetooth not connected; app not installed correctly; device not powered on. First, ensure Bluetooth is connected via phone settings. Verify app installation. Ensure devices are powered on. Try restarting the app and devices.
Sound is too loud even at lowest setting. Default settings may be too high for your hearing loss. Use the app to adjust the volume and frequency bands to a comfortable level. Experiment with different ear tips for better seal.
Echo or poor sound quality. Improper fit; environmental interference; faulty unit. Ensure ear tips provide a secure seal. Try moving to a quieter environment. If problem persists, contact support.
Settings change automatically or revert to factory. App synchronization issue; software glitch. Ensure the app is up-to-date. Try resetting the headset (see below). Re-apply settings in the app.
Android app not found on Google Play. App distribution method. Use the QR code or direct website link provided in the manual for Android app download.

Headset Reset Function

If you encounter persistent issues, you may need to reset the hearing aids:

  1. Place both hearing aids back into the charging case.
  2. Press and hold the touch button on both earbuds simultaneously for 10 seconds.
  3. This will reset the devices to their factory settings. You may need to re-pair them with your phone and re-configure settings in the app.

Maintenance

  • Cleaning: Regularly clean the ear tips and the body of the hearing aids with a soft, dry cloth. Do not use liquids or harsh chemicals.
  • Storage: When not in use, store the hearing aids in their charging case to protect them and keep them charged.
  • Avoid Moisture: Keep the devices away from water, humidity, and extreme temperatures.
  • Ear Tip Replacement: Replace ear tips periodically or if they become damaged to ensure optimal sound quality and comfort.

Specifications

Feature Detail
Model T005
Brand Laiwen
Hearing Loss Level Support Moderate to Severe (up to 114dB)
Connectivity Bluetooth 5.2
Control Method Smartphone APP (Widersonic)
Total Working Time (with charging case) Up to 24 Hours
Working Time (earbuds per charge) ≥ 8 Hours
Charging Case Working Time ≥ 16 Hours (provides multiple charges)
Noise Reduction Digital Chip Noise Cancellation
Package Weight 0.119 kg
Package Dimensions (L x W x H) 10 x 10 x 5 cm
Image detailing the battery life of the T005 hearing aids and charging case.

Figure 5: Battery Life Specifications

Comparison chart of T005 features versus traditional hearing aids, highlighting music, calls, app control, Bluetooth 5.2, and individual adjustment.

Figure 6: T005 Feature Comparison

User Tips

  • App Download for Android: If you have trouble finding the "Widersonic" app on Google Play, use the QR code or the direct download link provided in the manual or product packaging.
  • Customization is Key: Take time to adjust the volume, mode, and frequency bands in the app to find the settings that best suit your individual hearing needs and environment.
  • Secure Fit: Experiment with different sizes of ear tips to ensure a comfortable and secure fit. A good seal is crucial for optimal sound quality and to prevent feedback or the devices falling out.
  • Dual Functionality: Remember that these devices also function as standard Bluetooth headphones, allowing you to enjoy music and make calls in addition to hearing amplification.
  • Regular Updates: Check for app updates to ensure you have the latest features and bug fixes.

Warranty and Support

For detailed warranty information and customer support, please refer to the official user manual (PDF) available at: Laiwen T005 User Manual (PDF).

If you encounter any problems or have questions not covered in this manual, please contact the seller or manufacturer's customer service for assistance.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.