BUCKLOS Bicycle Rear Light

Contents

BUCKLOS Bicycle Rear Light User Manual

Model: Bicycle Rear Light

1. Introduction

Thank you for choosing the BUCKLOS Bicycle Rear Light. This USB rechargeable LED tail light is designed to enhance your visibility and safety during cycling, day or night. Featuring multiple lighting modes and a durable, waterproof design, it is an essential accessory for any cyclist.

Three BUCKLOS Bicycle Rear Lights showing 5 modes

Figure 1: Overview of the BUCKLOS Bicycle Rear Light, highlighting its 5 operational modes.

2. Setup

2.1 Unpacking and Initial Inspection

  1. Carefully open the package and remove the bicycle rear light and any accessories.
  2. Inspect the contents to ensure all parts are present and in good condition. Check for any missing pieces or visible damage.

2.2 Initial Charging

Before first use, it is recommended to fully charge the device.

  • Connect the provided USB charging cable to the light's charging port.
  • Plug the other end of the USB cable into a compatible USB power source (e.g., wall adapter, computer USB port, power bank, car charger).
  • The indicator light will show RED while charging.
  • The indicator light will turn BLUE when charging is complete.
Charging instructions for the bicycle rear light

Figure 2: Charging the device using various USB power sources. Red light indicates charging, blue light indicates full charge.

2.3 Mounting the Light

The BUCKLOS Bicycle Rear Light can be mounted on your bicycle's seatpost or on a helmet for versatile visibility.

  1. Seatpost Mounting: Use the included silicone strap to securely attach the light to your bicycle's seatpost. Ensure it is tight enough to prevent movement during rides.
  2. Helmet Mounting: The light can also be attached to compatible helmet straps or mounting points for elevated visibility.
  3. Adjustable Angle: The light features a 45-degree adjustable rotation mechanism. Adjust the angle to ensure optimal visibility to traffic behind you.
Bicycle rear light mounted on seatpost and in useBicycle rear light mounted on helmet

Figure 3: Examples of seatpost and helmet mounting for enhanced safety.

Diagram showing 45-degree rotation of bicycle rear light

Figure 4: The light can be rotated up to 45 degrees for optimal visibility.

3. Operating Instructions

3.1 Power On/Off

Press and hold the power button located on the side of the light for approximately 2-3 seconds to turn the light ON or OFF.

3.2 Changing Lighting Modes

Once the light is ON, short press the power button to cycle through the 5 available lighting modes. These modes typically include various steady and flashing patterns to suit different riding conditions and preferences.

4. Maintenance

4.1 Cleaning

Wipe the light's casing and lens with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents, as these may damage the plastic or electronic components.

4.2 Battery Care

  • Recharge the battery regularly, especially if the light has not been used for an extended period.
  • Avoid fully depleting the battery frequently, as this can reduce its overall lifespan.
  • Store the light in a cool, dry place when not in use.

5. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.Battery is depleted.Charge the light fully (refer to Section 2.2).
Light does not turn on.Device malfunction or damage.If charging does not resolve the issue, contact customer support.
Light is not charging.Faulty USB cable or power source.Try a different USB cable and/or a different USB power source. Ensure connections are secure.
Light is not charging.Charging port damage.If trying different cables/sources doesn't work, contact customer support.

6. Specifications

FeatureDetail
Light Output110 Lumens
Lighting Modes5 Modes (various steady and flashing patterns)
Waterproof RatingIPX5 (Resistant to water jets from any direction)
Battery Capacity500 mAh
Battery LifeUp to 10 Hours (depending on mode)
Power SupplyRechargeable Battery (USB)
Body MaterialPlastic
Mounting PlacementSeatpost, Helmet
Specifications for Red+Blue bicycle rear light

Figure 5: Key specifications of the BUCKLOS Bicycle Rear Light.

Product size diagram for bicycle rear light

Figure 6: Visual representation of the product's dimensions.

7. User Tips

  • For optimal brightness and maximum visibility, especially during night rides, ensure your rear light is fully charged before each use.
  • Experiment with different lighting modes to find the best pattern for your riding environment and time of day. Flashing modes often provide better daytime visibility.
  • Regularly check the mounting strap to ensure the light remains securely attached to your bicycle or helmet.

8. Warranty and Support

For any questions, technical support, or warranty claims regarding your BUCKLOS Bicycle Rear Light, please contact the seller or retailer from whom you purchased the product. Please have your purchase details available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.