E-ACE Car RearView Camera

Contents

E-ACE Car RearView Camera User Manual

Models: 4 LED, 8 LED, 12 LED Night Vision Reversing Auto Parking Monitor

1. Product Overview

The E-ACE Wide Angle Car RearView Camera is designed to enhance your vehicle's safety by providing a clear view of the area behind your car, especially during reversing and parking maneuvers. Featuring night vision capabilities with 4, 8, or 12 LEDs, a wide 140° viewing angle, and a durable waterproof design, this camera is an essential tool for any driver.

Diagram highlighting key features of the 8 LED night vision rear camera: 140° wide angle, waterproof, shockproof, dust-proof, IP67 rating, 6 glass lens, 8 LEDs, CCD chip.

Key features include 140° wide angle, IP67 waterproof rating, shockproof design, 6-glass lens, and CCD chip technology.

Key Features:

  • Wide Viewing Angle: 140° for comprehensive rear coverage.
  • Night Vision: Equipped with 4, 8, or 12 LEDs for clear visibility in low-light conditions.
  • Durability: IP67 waterproof, dust-proof, and shockproof construction.
  • High-Quality Imaging: Utilizes a CMOS (CCD) sensor with 6 glass lenses for sharp video.
  • Compatibility: Supports various display types including DVD Navigation, MP5 players, and dedicated car monitors.
  • Guiding Lines: Integrated parking guiding lines for easier and safer parking.

2. Package Contents

Please check the package for the following items:

  • Car RearView Camera (4, 8, or 12 LED variant)
  • Video Cable (RCA)
  • Power Cable
Car rearview camera with 8 LEDs and connection cables (RCA video, power).

Example of camera and included cables (8 LED version shown).

3. Installation and Setup

Before permanent installation, it is recommended to connect the camera to a 12-volt car battery to test its functionality. Ensure all components are working correctly before proceeding with the full installation.

3.1 Camera Mounting

The camera is compact, measuring approximately 22mm x 22mm, allowing for discreet installation. Choose a mounting location that provides the best possible view of the rear of your vehicle, typically above the license plate or near the trunk handle.

Image showing the compact size of the camera (22mm x 22mm) in hand, with a car in the background and parking guide lines.

The camera's compact size (22mm x 22mm) allows for versatile mounting.

3.2 Wiring Diagram for Reversing Camera

Follow the diagram below for connecting your rearview camera to your car's power supply and display unit (monitor, DVD navigation, or MP5 player). The camera operates on a DC12V power supply. Ensure all connections are secure to prevent signal loss or power issues.

Illustration showing the camera supporting multiple display types: DVD Navigation, MP5 player, and dedicated car monitor.

The camera is compatible with various display systems, including DVD Navigation, MP5, and dedicated car monitors.

Diagram illustrating the 140° viewing angle from the rear of a car, showing the wide field of vision provided by the camera, with an inset of the camera and a parking garage view.

The 140° viewing angle provides a broad field of vision for reversing.

Visual demonstration of the camera's waterproof feature, showing water splashing on it.

The camera features a sealed, waterproof design for reliable outdoor use.

Reversing video wiring diagram for Car Camera and Car Monitor.

Detailed wiring diagram for connecting the reversing camera to a monitor.

Wiring Steps:

  1. Connect the camera's video output (yellow RCA connector) to the AV input of your car monitor/display.
  2. Connect the camera's power cable (red wire) to the car's reversing light power (12V+). This ensures the camera powers on when reverse gear is engaged.
  3. Connect the camera's ground wire (black wire) to a suitable chassis ground point.
  4. For the monitor, connect its power (Red:+12V ACC) to an accessory power source that turns on with the ignition.
  5. Connect the monitor's ground (Black:GND) to a suitable chassis ground point.
  6. Connect the monitor's reverse signal trigger line to the car's reversing lamp 12V+ (if your monitor has this feature) to automatically switch to the camera view when reversing.

Note: The provided manual pages also include a 'Reversing radar wiring diagram' for a car parking sensor system. This diagram is for a separate parking sensor product and not directly for the camera itself. If you have a parking sensor system, refer to its specific instructions.

4. Operation

Once installed and wired correctly, the camera will automatically activate when you shift your vehicle into reverse gear (assuming it's wired to the reversing light circuit). The video feed will appear on your connected display, providing a wide-angle view of the area behind your car. Integrated guiding lines will assist you in judging distances and parking safely.

Key Operational Features:

  • Automatic Activation: Engages when reverse gear is selected.
  • Night Vision: LEDs provide enhanced visibility in dark conditions.
  • Parking Guiding Lines: Static lines on the display assist with parking alignment.

5. Maintenance

To ensure optimal performance and longevity of your E-ACE Car RearView Camera, follow these maintenance guidelines:

  • Cleaning: Regularly clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots that may obstruct the view. Avoid abrasive cleaners.
  • Waterproof Design: The camera is IP67 rated, meaning it is protected against dust ingress and temporary immersion in water. However, avoid high-pressure washing directly on the camera.
  • Connection Check: Periodically inspect the wiring connections for any signs of corrosion or looseness. Secure any loose connections.
  • Environmental Protection: The camera is designed to withstand various weather conditions (Operating TEMP: -30°C~+80℃).

6. Troubleshooting

If you encounter issues with your camera, refer to the following troubleshooting steps:

Problem Possible Cause Solution
No image on display
  • Loose video cable connection.
  • No power to camera or display.
  • Incorrect video input selected on display.
  • Faulty camera or cable.
  • Check and secure all RCA video connections.
  • Verify camera and display power connections (DC12V).
  • Ensure the display is set to the correct AV input.
  • Test with another camera/cable if available.
Image is distorted or flickering
  • Poor video signal.
  • Interference from other electrical components.
  • Loose connections.
  • Check video cable for damage.
  • Ensure proper grounding.
  • Route cables away from power lines or ignition components.
Night vision not working
  • LEDs are not receiving power.
  • Faulty LEDs.
  • Check camera power connection.
  • Ensure sufficient power supply.

7. Specifications

Camera Specifications
Brand Name E-ACE
Sensor Type CMOS (CCD)
Signal System PAL50Hz / NTSC60Hz
Effective Pixels 648×488, 720×540 (720P, 1080P compatible)
Lens Material Plastic + Glass (6 Glass Lens)
Shell Material Plastic (ABS)
Viewing Angle 140°
Guiding Line Yes
Night Vision 4, 8, or 12 LEDs (depending on model)
Waterproof Rating IP67
Operating Voltage DC12V (24V products also available)
Working Current 0.1A ~ 0.3A
Operating Temperature -30°C ~ +80°C
Dimensions (approx.) 22mm x 22mm
Package Weight 0.127 kg
Package Dimensions 16cm (L) x 13cm (W) x 4cm (H)
Compatible Monitor Display Specifications (General)
Type Digital TFT LCD
Display Sizes 4.3" / 5" / 7" / 9" / 10.1"
Display Scale 4:3 / 16:9
Video Inputs AV1 / AV2
Video Formats PAL / NTSC
Contrast Ratio 400:1 or 800:1
Pixel Resolution 480*272 (800*480, 1024*768)

8. User Tips

  • Optimal Placement: Experiment with different mounting locations to find the best angle for your vehicle, ensuring the widest and clearest view without obstruction.
  • Cable Management: Securely route all cables to prevent them from being pinched, frayed, or interfering with vehicle operations. Use cable ties or automotive tape.
  • Test Before Finalizing: Always perform a full functional test of the camera and display system before making any permanent modifications or reassembling interior panels.

9. Frequently Asked Questions (FAQ)

This section provides answers to common questions about the Car RearView Camera.

  • Q: Does this camera work with any car stereo?
    A: The camera uses a standard RCA video output, making it compatible with most car stereos or monitors that have an RCA video input (often labeled 'AV In' or 'Camera In').
  • Q: Are the parking lines adjustable?
    A: The parking guiding lines are typically static and integrated into the camera's output. They are not usually adjustable.
  • Q: Can I use this camera as a front camera?
    A: While technically possible, this camera is designed and optimized for rear view with guiding lines. Using it as a front camera might require additional wiring or a display that can manually switch inputs.
  • Q: How do I know if my car is 12V or 24V?
    A: Most passenger cars are 12V. Larger vehicles like trucks or buses are often 24V. Check your vehicle's manual or consult a mechanic if unsure. This camera is primarily for 12V systems, but 24V compatible versions may be available.

10. Warranty and Support

For any technical assistance, warranty claims, or further inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

An official user manual in PDF format is available for download. You can access it via this link: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.