1. Product Overview
The AVATTO Tuya WiFi Smart Switch Module is a compact device designed to convert traditional light switches into smart, app-controlled switches. It supports 2-way control and is compatible with popular smart home platforms like Amazon Alexa, Google Home, and Alice. This module allows for remote control, scheduling, and automation of your lighting, enhancing convenience and energy efficiency.
Image: Various AVATTO WiFi Switch Modules (1, 2, 3, and 4 channel versions) with their respective wiring diagrams and specifications.
2. Safety Information and Installation Warnings
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp, or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, leading to abnormal operation.
- Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair, or modify the device.
- Always turn off the power supply before carrying out any electrical installation work.
3. Setup and Wiring
3.1 Wiring Instructions
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the appropriate wiring diagram below.
- Insert the module into the junction box or lamp fixture.
- Turn on the power supply and proceed with the module configuration.
Note:
- Take your smartphone close to the switch module when configuring.
- Ensure you have a minimum of 50% Wi-Fi signal strength during configuration.
3.2 Wiring Diagrams
The module supports various wiring configurations, including single control, double switch (2-way control), and direct control without a physical switch.
Image: Comprehensive user manual page showing technical specifications, installation warnings, and various wiring diagrams (Single Control, Double Switch, Without Switch).
Single Control Wiring (Example for 1-Gang Module)
- L terminal: Connect to Live input.
- N terminal: Connect to Neutral input.
- L1 terminal: Connect to Load output (to light fixture).
- S1 terminal: Connect to the switch output.
- Connect Live input to the input side of your physical switch.
- Connect Neutral input to the light fixture.
Image: Diagram illustrating how to upgrade to 2-way control without changing existing house wiring, showing a 1-channel module's wiring.
Double Switch Wiring (2-Way Control)
For 2-way control, connect the module as shown in the 'Double Switch' diagram in the comprehensive manual image. Typically, L and N are connected to the module, and S1 and S2 are connected to the two physical switches, with L1 going to the load.
Without Switch Wiring (App Control Only)
If you intend to control the light solely via the app, connect Live to L, Neutral to N, and L1 to the load. The S1/S2 terminals remain unused.
3.3 App Download and Registration
- Download App: Scan the QR code provided in the official manual or search for "AVATTO" or "Smart Life" in your device's App Store (iOS) or Google Play Store (Android).
- Register: Open the app, log in or register a new account using your mobile number or email address. Follow the prompts to enter a verification code and set your password. Create a "Family" to organize your smart devices.
3.4 Device Pairing
- Reset Key: After completing the wiring, press the reset key on the module for approximately 10 seconds, OR turn the traditional switch connected to the module ON/OFF 5 times. The indicator light inside the module will begin flashing quickly, indicating it is in pairing mode.
- Pairing Process: Ensure your phone's Bluetooth is enabled. In the AVATTO/Smart Life app, tap "Add Device" (usually a '+' icon). The app should detect the new device. Follow the on-screen instructions to complete the pairing.
- The connection process typically takes 10-120 seconds, depending on your network conditions.
Image: Visual guide demonstrating easy installation of the module inside a switch box or on a lamp fixture.
4. Operating Instructions
4.1 App Remote Control
Once paired, you can control your lights from anywhere using the AVATTO or Smart Life app on your mobile phone. This includes turning lights on/off, setting schedules, and creating automation routines.
Image: Illustration of APP remote control, showing a user controlling lights in a house via a smartphone app.
4.2 Dual Way Control
The module supports upgrading existing 2-way control switches without requiring changes to the original house wiring design. This allows you to maintain the functionality of your traditional wall switches while adding smart control capabilities.
4.3 Group Control Function
You can group multiple switch modules within the app to control them simultaneously. For example, all lights in a living room can be turned on or off with a single command.
Image: Diagram showing multiple smart switch modules in different rooms being controlled as a single group via the mobile app.
4.4 Voice Control Integration
Connect your AVATTO module to Amazon Alexa or Google Assistant to enable voice control. This allows you to manage your lights hands-free by issuing simple voice commands.
4.5 Manual Override
The module retains the functionality of your traditional wall switch. You can manually turn the lights on or off using the physical switch, and the app will synchronize with the current state of the light.
5. Maintenance
The AVATTO Smart Switch Module is designed for low maintenance. To ensure optimal performance and longevity:
- Keep the device clean and free from dust.
- Avoid exposure to water, excessive humidity, or extreme temperatures.
- Do not attempt to open or repair the module yourself. Refer to qualified personnel for any issues.
6. Troubleshooting (FAQ)
Common Issues & Solutions
- Q: What should I do if I can't configure the switch module?
- A: Please check the following:
- Ensure the device is powered on.
- Verify that your mobile device and the switch module are connected to the same 2.4GHz Wi-Fi network.
- Check for good internet connectivity.
- Confirm that the Wi-Fi password entered in the app is correct.
- Double-check all wiring connections.
- Q: What devices can be connected with this module?
- A: Most household appliances that are controlled by a switch, such as lamps, humidifiers, coffee makers, etc., within the specified load limits.
- Q: What should I do if the Wi-Fi connection goes off?
- A: You can still control the connected device using your traditional physical switch. Once Wi-Fi is restored and active, the module will automatically reconnect to your network.
- Q: What should I do if I change my Wi-Fi password?
- A: You will need to re-pair your Wi-Fi switch module with the app and reconfigure it with the new Wi-Fi password.
- Q: Which app is compatible with it?
- A: The AVATTO app or the Smart Life app.
- Q: Does it work with RF?
- A: The product description specifies WiFi control. RF compatibility is not mentioned.
- Q: Does it come with a capacitor to replace the neutral wire?
- A: The wiring diagrams show a neutral wire connection (N terminal), indicating that a neutral wire is required for installation. Capacitors are typically used in no-neutral setups, which this module does not appear to support based on the provided diagrams.
- Q: Is this mini switch a dry contact switch?
- A: No, the module is designed for AC power control (AC100-240V) and switches live loads, not dry contacts.
- Q: How can I program it to turn off one hour after being turned on?
- A: This functionality can typically be set up using the scheduling or timer features available within the AVATTO or Smart Life mobile application.
7. Specifications
Image: Diagram showing product dimensions and basic parameters for 1-channel and 4-channel modules.
| Parameter | Value |
|---|---|
| Voltage | AC100-240V 50/60Hz |
| Max. Load (1CH) | LED 800W 16A |
| Max. Load (2CH) | LED 2x150W 2x5A |
| Max. Load (3CH) | LED 3x150W 3x3.3A |
| Max. Load (4CH) | LED 4x150W 4x2.5A |
| Operation Temperature | -10°C to +40°C |
| Case Temperature (Max) | Tc: +80°C |
| Operation Range | ≤200m |
| Dimensions (LxWxH) | 39mm x 39mm x 19mm |
| IP Rating | IP20 |
| Wireless Type | WiFi 2.4GHz |
| Material | Acrylic |
| Certification | CE, RoHS |
| Is Smart Device | Yes |
| Origin | Mainland China |
8. User Tips
- The module's compact size generally allows it to fit well inside standard electrical boxes, but always check available space before installation, especially in older or crowded boxes.
- Leverage the scheduling and timer functions within the AVATTO or Smart Life app for automated lighting control, which can enhance convenience and energy savings.
- The ability to use existing physical switches alongside smart control is a key benefit, allowing you to maintain your home's aesthetic while upgrading to smart functionality.
- Consider using the group control feature for rooms with multiple lights to simplify management.
- For optimal performance, ensure your Wi-Fi network is stable and the module is within good signal range.
9. Warranty and Support
The AVATTO Tuya WiFi Smart Switch Module is CE certified, ensuring compliance with European safety, health, and environmental protection requirements.
For comprehensive details, including additional diagrams and troubleshooting, please refer to the official user manual PDF:
For further assistance or technical support, please contact your retailer or the manufacturer directly.