MRSVI MX3

Contents

MRSVI MX3 Universal Air Mouse Wireless Mini Keyboard Remote Control User Manual

Model: MX3

1. Introduction

The MRSVI MX3 is a multi-axis device integrating the main functions of an air mouse, a remote control, and a wireless keyboard. It operates via 2.4G RF wireless technology and supports IR learning for basic TV functions. This versatile device is designed for use with Android TV Boxes, Projectors, Android Smart TVs, IPTV, Networked Set-top Boxes, Mini PCs, and other devices with a standard USB port.

MX3 Air Mouse and Keyboard Remote Control with USB Receiver

Figure 1: MX3 Air Mouse and Keyboard Remote Control with USB Receiver

2. Package Contents

  • MX3 Air Mouse & Keyboard Remote Control
  • USB Receiver Dongle
  • User Manual (this document)

3. Setup Guide

3.1. Battery Installation

  1. Locate the back cover on the keyboard side of the remote control.
  2. Slide or open the back cover to reveal the battery compartment.
  3. Insert two (2) AAA batteries, ensuring correct polarity (+/-).
  4. Close the battery cover securely.

3.2. Connecting the USB Receiver

  1. Plug the USB receiver dongle into an available USB port on your target device (e.g., Android TV Box, PC, Smart TV).
  2. The remote control will automatically pair with the device.
2.4G Wireless Connection Setup with Laptop and MX3 Remote

Figure 2: Connecting the USB Receiver for 2.4G Wireless Connection

3.3. Initial Test

After connecting the USB receiver, move the remote control to see if the cursor moves on your screen. If the cursor does not move and the red LED indicator is not flashing, press the Cursor Lock button and try again. If the issue persists, try plugging the USB dongle into a different USB port on your device.

4. Operating Instructions

4.1. Remote Control Layout

MX3 Remote Control Front Panel Layout with Labeled Buttons

Figure 3: MX3 Remote Control Front Panel Layout

4.2. Button Functions

  • Power: Turns the device on/off (if supported by IR learning).
  • LED Indicator: Shows status (pairing, low battery, IR learning).
  • Home: Returns to the home screen of your device.
  • Menu: Opens the menu options.
  • Return: Goes back to the previous screen.
  • OK: Confirms an action or inserts the cursor.
  • Volume Up/Down (VOL +/-): Adjusts audio volume.
  • Mute: Mutes/unmutes audio.
  • Page Up/Down (PG +/-): Scrolls pages up or down.
  • Cursor Lock: Short press to lock the cursor; press again to unlock it.
  • IR Learning Set Key (TV): Used to enter/exit IR learning mode and switch between 2.4G and IR modes.
  • IR Learning Keys (Red, Green, Yellow, Blue): Programmable keys for IR learning.
  • Browser (Mic, optional): Opens web browser or activates microphone function (if available and supported by device/app).

4.3. Wireless Keyboard

The reverse side of the remote features a full QWERTY keyboard. Key functions include:

  • Backspace: Deletes the previous character.
  • CAPS: Capitalizes typed characters.
  • ENTER: Confirms operations.
  • SPACE: Inserts a space.
  • ALT: Switches to numeric and special characters (top right corner of keys). Press ALT again to switch back.
MX3 Remote Control Keyboard in Use, highlighting compatibility with various devices

Figure 4: MX3 Wireless Keyboard in Use

4.4. Backlight (Optional)

Press the dedicated backlight button (if your version has one) to turn the backlight on or off for the remote's keys.

4.5. Microphone (Optional)

If your device and application support voice input (e.g., Google app), you can use the built-in microphone. Press the Mic Button to enable or disable the microphone. You do not need to hold the Mic Button while speaking.

4.6. IR Learning Instructions

The MX3 remote has 5 IR learning keys (POWER and the 4 color buttons at the bottom) that can be programmed to learn basic functions from your TV remote. Ensure your TV remote supports NEC protocol.

  1. Step 1: Preparation
    Ensure the MX3 remote has fresh batteries. Point the head (infrared emitter) of the MX3 remote and your TV remote towards each other, keeping the distance less than 0.1 feet (approx. 3 cm).
  2. Step 2: Enter Learning Mode
    Press and hold the TV button on the MX3 remote for 3-5 seconds. The red LED indicator will flash very fast, then release the TV button. The red LED indicator will now flash slowly, indicating the MX3 remote has entered IR learning mode.
  3. Step 3: Learn a Function
    Press the button on your TV remote that you wish to learn (e.g., POWER button). The red LED indicator on the MX3 remote will stop flashing and remain lit, indicating it has received the signal.
  4. Step 4: Assign the Function
    Press the corresponding button on the MX3 remote (e.g., POWER or one of the 4 color buttons) where you want to save the learned function. The red LED indicator will flash slowly again, confirming successful learning.
  5. Step 5: Learn More Functions (Optional)
    Before exiting IR learning mode, you can repeat Steps 3 and 4 to program other functions (up to 5 in total).
  6. Step 6: Exit Learning Mode
    Press the TV button on the MX3 remote to exit IR learning mode.

Notes:

  • If you want to change a learned function, simply repeat the learning process for that button; it will save the latest learned function.
  • The red TV button is only for entering/exiting IR learning mode and switching between 2.4G and IR modes; it cannot be programmed to learn functions.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the remote control. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace batteries when the remote's performance degrades or the LED indicator flashes slowly.
  • Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting (FAQs)

Q1: How do I adjust the sensitivity of the mouse cursor?

A1: To move faster, press Home + Volume Up. To move slower, press Home + Volume Down.

Q2: How do I re-pair the USB dongle with the device?

A2: Ensure batteries are correctly inserted and have enough power. Press OK + TV buttons simultaneously for 3 seconds; the red LED indicator will flash fast. Then, insert the USB dongle into the device's USB port. The red LED indicator will stop flashing, indicating successful pairing.

Q3: Why do some function keys (like OK or Return) not work?

A3: First, check battery power. If the red LED indicator flashes slowly, replace the batteries. Second, verify the USB dongle is properly paired. Third, some keys might not be compatible with all devices due to different codes.

Q4: Why do I fail to learn from my TV remote?

A4: Ensure your TV remote supports NEC protocol. Follow the IR learning instructions carefully. Only POWER and the four color buttons can be programmed.

Q5: Why does the cursor move very slowly, or even disappear?

A5: Try replacing batteries, re-plugging the USB dongle, or re-pairing (OK+TV).

Q6: How do I type numeric characters?

A6: Press the ALT button to type the characters located at the top-right corner of the keys. Press ALT again to switch back to letters.

Q7: How do I wake up the air mouse from standby mode?

A7: Press any key to wake up the air mouse.

Q8: Why does the backlight not work?

A8: Check battery power and ensure the backlight button is pressed. If the remote enters standby mode, press any key to reactivate the backlight.

Q9: How do I reset the air mouse to factory settings?

A9: Press TV + DEL buttons simultaneously for 3 seconds. The air mouse will reset to factory settings.

Q10: Why did the cursor stop working suddenly?

A10: Check battery power. Also, ensure the cursor lock button is not activated (press it to toggle).

Q11: If the USB receiver dongle is lost, can I buy a replacement?

A11: The remote is specifically paired with its original USB receiver. A generic replacement dongle may not work. Please contact customer support for possible replacement options.

Q12: Does this remote work with Amazon Fire TV or Fire TV Stick?

A12: No, this remote is not compatible with Amazon Fire TV and Fire TV Stick devices.

7. Specifications

FeatureSpecification
Transmission2.4G RF Wireless
Sensor3-Gyro + 3-Gsensor
Number of Keys81
Range10 meters
Battery TypeAAA x 2 (not included)
MaterialPlastic & Silicone
Dimensions172 x 52 x 19 mm
Weight100g
Frequency433 MHz
Wireless CommunicationIR (Infrared)
UseTV, Universal
CertificationsCE, FCC

8. User Tips

  • Plug and Play Convenience: Many users find the MX3 works immediately upon plugging in the USB receiver, requiring no additional configuration.
  • Excellent for Android TV Boxes: This remote is highly recommended for Android TV box users due to its comprehensive functionality.
  • Air Mouse Functionality: The air mouse feature is often praised for its intuitive control, similar to a Wiimote or LG Magic Controller.
  • Media Control: Utilize the dedicated shortcut and media keys for easy control of playback, volume, and navigation.
  • Replaceable Batteries: The use of 2 AAA batteries is a preferred feature for many, offering easy replacement compared to non-replaceable internal batteries.
  • Comfortable Design: The ergonomic design contributes to a comfortable user experience.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.