1. Product Overview
KLLISRE Desktop DDR4 Memory modules are designed for high-performance computing, offering excellent speed and reliability for gaming, content creation, and everyday computing tasks. These modules feature sleek heat spreaders for improved thermal performance and stability.

Figure 1: Kllisre Desktop DDR4 Memory Modules
Video 1: Official Kllisre DDR4 Memory Product Showcase
2. Specifications
Detailed specifications for Kllisre Desktop DDR4 Memory modules:
| Specification | Details |
|---|---|
| Memory Type | DDR4 Desktop Memory (Unbuffered) |
| Available Capacities | 8GB, 16GB (Single Module) |
| Available Frequencies | 2666MHz, 3200MHz, 3600MHz |
| Voltage | 1.2V |
| Pin Configuration | 288-pin |
| Error Correction | Non-ECC |
| Registered | Unbuffered |
| CAS Latency | CL21 (depending on frequency) |
| Form Factor | DIMM (Dual In-line Memory Module) |
| Heat Spreader | Yes, aluminum heat spreader |
| RGB Lighting | No |
| Cooling Fin | Yes |
For a quick reference, here is a summary of supported configurations as found on product packaging:

Figure 2: Product Packaging with Specifications and Warranty Information
| Frequency | Capacity | Interface |
|---|---|---|
| DDR3 1600 | 4G/8G | 240-Pin-DIMM |
| DDR3 1866 | 4G/8G | 240-Pin-DIMM |
| DDR4 2133 | 4G/8G | 288-Pin-DIMM |
| DDR4 2400 | 4G/8G/16G | 288-Pin-DIMM |
| DDR4 2666 | 4G/8G/16G | 288-Pin-DIMM |
| DDR4 3200/3600 | 8G/16G/32G | 288-Pin-DIMM |
3. Compatibility
KLLISRE Desktop DDR4 Memory is compatible with a wide range of desktop motherboards and processors.
Recommended Motherboards
- Intel Chipsets: 600, 500, and 400 series (e.g., Z690, B660, H610, Z590, B560).
- AMD Chipsets: 500 and 400 series (e.g., X570, B550, X470, B450).
- Older chipsets that support DDR4 memory.
Recommended Processors
- Intel Processors: Core i3, i5, i7, i9 (10th, 11th, 12th, 13th Gen).
- AMD Processors: Ryzen 3, 5, 7, 9 (3000, 4000, 5000 series).
Memory Configuration for Optimal Performance
- Install memory in pairs for dual-channel operation. Always consult your motherboard manual for the correct slot configuration.
- For best results, use identical memory modules with the same capacity and frequency.
- Enable XMP (Extreme Memory Profile) for Intel systems or D.O.C.P. (Direct Overclock Profile) for AMD systems in your motherboard's BIOS to achieve advertised speeds.
- Note: Higher frequency memory (e.g., 3600MHz) may require a more recent CPU and motherboard to achieve full speed. Always check your motherboard's QVL (Qualified Vendor List) for compatibility.
4. Setup (Installation Guide)
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components.
Power Down the System
Shut down your computer completely and disconnect all power cables from the power supply.
Open the Computer Case
Remove the side panel of your computer case to access the motherboard.
Locate Memory Slots
Identify the memory slots on your motherboard. Consult your motherboard manual for optimal slot population order (usually slots 2 and 4 for dual channel).
Release Retention Clips
Open the retention clips at both ends of the memory slot by pushing them outward.
Align the Memory Module
Align the notch in the memory module with the key in the memory slot to ensure proper orientation.
Install the Memory
Firmly press down on the memory module until the retention clips snap into place automatically.
Repeat for Additional Modules
If installing multiple modules, repeat the process for each module, following the motherboard's recommended population sequence.
Close the System
Replace the computer case panel, reconnect all cables, and power on the system.
Note: After installing new memory, enter the system BIOS/UEFI to verify that all memory is detected and enable XMP/D.O.C.P. to achieve the advertised speed.
5. Maintenance
Kllisre DDR4 memory modules are designed for long-term reliability and typically require no user maintenance. Ensure your computer case has adequate airflow to prevent excessive heat buildup, which can affect all internal components, including RAM.
6. Troubleshooting
System Won't Boot After Installation
- Possible Causes: Improperly seated memory, incompatible memory, BIOS needs an update.
- Solutions: Reseat memory modules firmly, clear CMOS (refer to motherboard manual), update motherboard BIOS to the latest version.
Only Partial Memory Detected
- Possible Causes: Improperly seated memory, incompatible memory population, faulty memory slot.
- Solutions: Reseat memory modules, consult your motherboard manual for proper slot population order, try modules in different slots to isolate a potential faulty slot.
Memory Not Running at Advertised Speed (3200/3600MHz)
- Why This Happens: By default, DDR4 memory runs at a conservative JEDEC standard speed (usually 2133MHz or 2400MHz). To achieve the advertised higher speeds, you must enable XMP (Intel) or D.O.C.P. (AMD) in the BIOS.
- Other Reasons: Some older CPUs or motherboards may not support higher memory speeds. The memory controller in your CPU has limitations, and motherboard topology can affect maximum achievable speed.
- Solutions:
- Enter BIOS/UEFI settings during boot (usually by pressing DEL or F2).
- Find memory settings (often under "Advanced" or "Overclocking" menu).
- Enable XMP (Intel) or D.O.C.P. (AMD).
- Select the appropriate profile for your memory speed.
- Save changes and exit BIOS.
- If the system becomes unstable, update BIOS to the latest version.
- If problems persist, you may need to manually set speed and timings.
System Instability or Crashes
- Possible Causes: Incompatible memory timing settings, overheating, insufficient power.
- Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy, test with one module at a time to isolate issues.
Blue Screen Errors
- Possible Causes: Memory compatibility issues, processor incompatibility, incorrect timings.
- Solutions: Test each module individually, run memory diagnostic tools (e.g., Windows Memory Diagnostic or MemTest86), adjust BIOS memory settings.
Note: If problems persist after trying these steps, test each memory module individually to identify potential faulty modules. Contact KLLISRE support if you suspect a defective product.
7. User Tips
- Ryzen Compatibility: Users have reported excellent performance with AMD Ryzen 3500x, 3600, and 5600x processors, and B450M motherboards.
- Dual Channel Setup: Always refer to your motherboard manual for the correct slots to populate when installing two memory modules for dual-channel operation. This is crucial for optimal performance.
- Matching Modules: For the best stability and performance, especially in dual-channel configurations, use identical Kllisre memory modules (same capacity and frequency).
- Xeon Processors: These memory modules are designed for desktop PCs and are not compatible with Xeon processors, which typically require ECC (Error-Correcting Code) memory.
- Notebooks: These are DIMM (Dual In-line Memory Module) for desktop computers and are not suitable for notebooks, which use SODIMM (Small Outline Dual In-line Memory Module).
8. Warranty and Support
Warranty Information
KLLISRE Desktop DDR4 Memory modules are covered by a one-year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
This warranty does not cover damage resulting from:
- Accident
- Misuse or abuse
- Improper installation
- Unauthorized modifications
Technical Support
For warranty claims or technical support, please contact KLLISRE support with your purchase details and a clear description of the issue.
A PDF version of this manual may be available for download from the seller's product page or Kllisre's official support channels.