LEXXSON NTG4.5 Becker Module

Contents

LEXXSON Wireless CarPlay & Android Auto Upgrade Kit

Model: NTG4.5 Becker Module

Brand: LEXXSON

1. Safety Instructions

To avoid risk of serious injury or possible violation of laws, please read the following thoroughly before installation or connecting. Be sure to use specified accessory parts and install them securely. Do not damage wiring. Failure to do so may result in electric shock or fire due to electrical shorts.

Do not install in locations with high moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

2. Product Description

This upgrade kit is specifically designed for the Mercedes-Benz NTG 4.5 System. It addresses the inconvenience of not having CarPlay and Android Auto in your car. This kit allows Mercedes-Benz owners to integrate the CarPlay system without replacing the car radio, transforming your car radio from a "single function" to a "multi-function" device.

The module supports wireless CarPlay and wireless Android Auto, maintaining your usage habits and connecting automatically when you enter the car. It also features a Mirroring function and camera mode, enhancing driving safety and convenience.

3. Package Contents

The package typically includes:

  • LEXXSON Wireless CarPlay & Android Auto Module
  • Wiring Harness (USB, AUX, Reversing video input, CAN-H, CCD 12V, CAN-L, BACK connections)
LEXXSON Wireless CarPlay & Android Auto Module with cables and screen interface
Image: Main module, wiring, and a display showing the CarPlay interface.

4. Setup and Installation

4.1. Compatibility Check

This module is suitable for Mercedes-Benz vehicles with the NTG4.5 system. To determine if your Mercedes (2011-2015 models) has NTG4.5 or NTG4.7, check for a HARMAN BECKER slot in the glove box on the passenger side. NTG4.5 systems have this slot, while NTG4.7 systems do not. Also, verify the presence of an LVDS port.

Diagram showing how to identify NTG4.5 system by checking for a HARMAN BECKER slot in the glove box and an LVDS port.
Image: Visual guide for identifying NTG4.5 system via HARMAN BECKER slot and LVDS port.

4.2. Module Installation

Simply align the module and plug it into the HARMAN-BECKER socket in your vehicle.

Diagram showing the module being plugged into the HARMAN-BECKER socket and connections for USB expansion and AUX.
Image: Step-by-step illustration of plugging the module into the HARMAN-BECKER socket and connecting essential cables.

4.3. Wiring Connections

Connect the provided wiring harness to the module and your car's system as follows:

Detailed connection diagram for the module's wiring harness.
Image: Connection diagram for the module, showing labeled wires and their corresponding functions.
  1. USB: Connect to a mobile phone for data transfer and software upgrades.
  2. AUX: Connect to the original car AUX input.
  3. Reversing video input: For connecting a rear view camera.
  4. CAN-H
  5. CCD 12V
  6. CAN-L
  7. BACK

4.4. Rear View Camera Installation

The Becker box supports the installation of CVBS format aftermarket rear view cameras. If your car already has a rear view camera, this module cannot be used to add another one.

For detailed wiring of the rear view camera, please refer to the diagram in the original PDF user manual available at: Original User Manual (PDF). The diagram typically shows connections for the trigger wire, video input (back video in), and GND 12V to the module, and power (DC-12V) to the camera.

5. Operating Instructions

5.1. Initial Bluetooth Connection

Before using a wired or wireless connection for CarPlay or Android Auto, you must first connect your phone to the car's original MB Bluetooth.

  1. Turn on Bluetooth audio on your car's stereo system and select "Connect via BT audio device".
  2. Pair your phone's Bluetooth with the MB Bluetooth.

Refer to your car's manual for specific steps on enabling and pairing with MB Bluetooth. The process involves searching for BT audio devices and confirming the connection.

5.2. Accessing the Becker Interface

Press the "NAVI" button on your car's console to enter the Becker interface, which will display the CarPlay, Android Auto, Bluetooth, and Settings options.

The Becker interface typically shows icons for CarPlay, Android Auto, Bluetooth, and Settings.

5.3. Auto Connect Setting

Within the Becker interface, click the "Bluetooth" icon and ensure "Auto Connect" is selected. This allows for automatic connection in the future.

The Bluetooth settings screen will show connection status and options like Auto Connect and Auto Answer.

5.4. Wireless CarPlay Connection

  1. On your iPhone, turn on Wi-Fi and Bluetooth.
  2. In the Becker interface, click the "CarPlay" icon.
  3. On your iPhone, pair to the Bluetooth device named "BK-xxxx" (where xxxx is a unique identifier).
  4. Allow all requested permissions on your iPhone.
  5. Click "Use CarPlay" on your iPhone. It will connect to wireless CarPlay after a few seconds.

Your iPhone's screen will show a prompt to "Use CarPlay with 'BK-XXXX'" and confirm that CarPlay automatically connects.

5.5. Wireless Android Auto Connection

  1. On your Android phone, turn on Wi-Fi and Bluetooth.
  2. In your phone's Bluetooth settings, pair to the device named "BK-xxxx".
  3. Tap "Pair-Allow" on any pop-up notifications on your Android smartphone.
  4. It will connect to wireless Android Auto after a few seconds.

Your phone's screen will show "Pair new device" and then "Connected devices" with "BK-xxxx" listed.

5.6. Wired CarPlay & Android Auto Connection

Ensure you have already paired your phone with the car's factory MB Bluetooth first. Then, plug your phone's data cable into the USB port on the Becker box. The system will automatically enter the interconnection method corresponding to your mobile phone's operating system (CarPlay for iOS, Android Auto for Android).

This setup involves connecting your phone directly to the module via a USB cable, after initial Bluetooth pairing.

5.7. Steering Wheel Button Control

The module supports control via your car's steering wheel buttons:

  • Siri voice control: Activate Siri.
  • Volume up/down: Adjust audio volume.
  • Short press to answer: Answer incoming calls.
  • Short press to hang up: End calls.
Image of a Mercedes-Benz steering wheel with buttons highlighted and labeled for their functions.
Image: Steering wheel controls for module functions.

6. Maintenance

To ensure the longevity and optimal performance of your LEXXSON module, follow these general maintenance guidelines:

  • Keep the module and connections dry. Avoid exposure to liquids.
  • Keep the module free from dust and debris. Use a soft, dry cloth for cleaning.
  • Ensure all cables are securely connected and not pinched or damaged.
  • Avoid extreme temperatures. Operate and store the device within the specified temperature ranges.

7. Troubleshooting

7.1. CarPlay Works But No Sound

If CarPlay is active but you hear no sound:

  • Check if the Bluetooth connection between your phone and the car's MB Bluetooth is lost.
  • Verify the audio source on your phone. Ensure it is set to "MB Bluetooth".
  • Disconnect any other Bluetooth devices that might be interfering with the connection.

This often occurs if the audio output is directed to another device or if the primary Bluetooth connection is interrupted.

7.2. Cannot Enter CarPlay/Android Auto Interface After Pairing

If you have paired your phone's Bluetooth and allowed all permissions, but cannot access the CarPlay or Android Auto interface:

  • First, try resetting the Becker box. In the Becker interface, navigate to "Settings" > "System" > "Factory reset".
  • Concurrently, reset your mobile phone's network settings.
  • If the issue persists, please contact customer support.

The factory reset option for the Becker box is typically found under System settings.

7.3. General Compatibility Issues

Many compatibility questions arise regarding specific Mercedes models and years. Always ensure your vehicle has the NTG4.5 system and the HARMAN-BECKER slot in the glove box. If your car is a different model or year, or lacks these features, the module may not be compatible.

8. Specifications

Feature Specification
Operating Voltage 5V
Operating Temperature -30°C to +75°C
Stored Temperature -30°C to +85°C
Environment Humidity ≤98% (at 45°C), 65±5% (rated)
Power Consumption 1A (rated), 3A (Max)
Shutdown Current 300mA (Clock is on)
Quiescent Current Less than 3mA
Charging Current ≤2A. When USB charging current >1A, the unit activates circuit protection to control current below 1.5A to prevent product damage.

9. Warranty and Support

Our products undergo strict functional and performance tests before leaving the factory to ensure each product is delivered in good condition. All products are covered by the three guarantees policy for vehicle electronics.

If you encounter any problems while using the product, please contact your dealer or the seller for support.

For the complete user manual and additional diagrams, please refer to the PDF document: Original User Manual (PDF).

10. User Tips

  • Verify Compatibility: Always double-check that your Mercedes-Benz model (2011-2015) has the NTG4.5 system and a HARMAN-BECKER slot in the glove box before installation.
  • Initial Bluetooth First: For both wireless and wired connections, ensure your phone is first paired and connected to your car's original MB Bluetooth. This is a crucial prerequisite.
  • Audio Output Check: If you experience CarPlay or Android Auto working without sound, confirm that your phone's audio output is correctly directed to "MB Bluetooth".
  • Wired Connection Order: When using a wired connection, plug your phone's data cable into the module's USB port only after the initial MB Bluetooth pairing is established.
  • Software Updates: Utilize the USB port for potential software upgrades to keep your module's firmware current.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.