1. Product Introduction
The Xiaomi Router Be5000 is a high-performance WiFi 7 router designed for whole-house intelligent linkage and robust network security management via an intuitive mobile application. It features a 2.5G port and supports Mesh networking for extended coverage.
2. Package Contents
Ensure all items are present in the package:
- Xiaomi Router BE5000
- Instruction Manual
- Network Cable
- Power Adapter
3. Product Overview
Familiarize yourself with the router's ports and buttons:
| Serial Number | Name | Use |
|---|---|---|
| 1 | Power port | For connecting the power adapter |
| 2 | RESET button | Used to restore router factory settings |
| 3 | 1G network port | A network port with a maximum rate of 1 Gbps that can be used as a WAN or LAN port (automatic identification) |
| 4 | 2.5G network port | A network port with a maximum rate of 2.5Gbps, available as a WAN port or LAN port (automatic identification) |
| 5 | MESH button | Used to network with routers that support the Xiaomi Mesh feature |
Indicator Light Status Description
| Indicator Light | Status Description |
|---|---|
| Extinguish | Off state or not connected to power |
| Steady orange | The system is starting up or the network is abnormal |
| Orange Breathing | Boot complete, system to be configured |
| Blinking orange | The Mesh is being connected to the main route or the system is being upgraded |
| Steady blue | Normal operation |
| Blue Breath | Found configurable sub-router, flicker for 2 minutes without network operation will automatically restore the steady indicator |
| Blinking blue | A lower-level node is being connected |
4. Setup Instructions
4.1 Initial Network Connection
- Power on the router.
- Connect any of the router's network ports to the wall socket or the LAN port of your optical network terminal (ONT) / broadband modem. If an ONT/modem is not provided by your broadband operator, connect the incoming network cable directly to any of the LAN ports on the back of the router.
4.2 Internet Access Configuration
- Wait until the indicator light turns orange and starts to breathe.
- Connect your mobile phone or computer to the router's Wi-Fi network (no password required). The Wi-Fi name is typically found on the label at the bottom of the router.
- Open a web browser. The page should automatically jump to the internet access guide page. If it does not, open your browser and enter
miwifi.com. - Enter the account and password provided by your broadband operator and click 'Next'. (This step may be skipped depending on your internet access method.)
- Set a new Wi-Fi password and a management password. You can choose to use the same password for both.
Note: If the Wi-Fi configuration has been modified, the Wi-Fi module will restart. There may be a brief period when Wi-Fi cannot be accessed. Please try searching for Wi-Fi again later.
4.3 IPv6 Setup Guide
- Open a browser, enter
miwifi.com, and input the password to access the router management page. - Navigate to Common Settings > Internet Settings, and enable IPv6 and IPv6 Firewall.
- Refer to the instructions on the reference page to select the required working mode and complete the corresponding settings.
4.4 Mi Home APP Management
For a better experience, manage your router using the Mi Home APP:
- Connect your mobile phone to the router's Wi-Fi.
- Open the Mi Home app and log in with your Xiaomi account.
- Follow the automatic prompt to complete the binding of the router to the app.
4.5 Xiaomi Mesh Networking
To cover a larger area, you can set up a Mesh network with multiple Xiaomi Mesh-compatible routers. The Xiaomi router BE5000 can act as the main router.
Method 1: Networking via Mi Home APP
- Open the Mi Home APP.
- Enter the "Mesh Network Devices" page of the main router.
- Click on [Add Node].
- Complete the network setup according to the prompts provided in the app.
Method 2: Networking by holding down the reset button
- Place the sub-router near the main router and connect it to power. Ensure the distance between the main router and sub-router is more than one meter to avoid interference.
- After the sub-router is fully started, the main router will automatically detect it, and its indicator light will start to breathe blue.
- If the sub-router has been previously configured, press and hold its RESET button for 5 seconds to restore it to factory settings.
- Briefly press the MESH button on the main router. The main router's indicator light will flash blue, initiating the mesh networking process.
- Wait for the sub-router's indicator light (or Internet indicator light for dual-light products) to turn solid white or blue, indicating successful networking.
- Once networked, place the sub-router at the desired location for Wi-Fi coverage and power it on.
5. Operating Instructions
The primary operation of the router involves maintaining a stable network connection and managing settings. Once configured, the router operates autonomously.
- Network Stability: The router is designed for stable and fast wireless transmission. Ensure it is placed in a central location for optimal signal distribution.
- Guest Network: For security, consider setting up a separate guest Wi-Fi network for visitors.
- Parental Controls: Utilize the Mi Home APP to manage device internet time and filter dangerous access for family members.
- Firmware Updates: Regularly check for and install firmware updates via the Mi Home APP or router management page (miwifi.com) to ensure optimal performance and security.
6. Maintenance
- Placement: Place the router in an open area, away from obstructions and other electronic devices that may cause interference.
- Cleaning: Keep the router clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
- Ventilation: Ensure proper ventilation around the router to prevent overheating. Do not cover the ventilation holes.
- Power Cycle: If you experience network issues, try power cycling the router (unplugging it from power for 10 seconds and then plugging it back in).
7. Troubleshooting (Q&A)
Router Performance Failure Table
| Issue | Description |
|---|---|
| Indicator shows orange steady on for more than two minutes without breathing | The system is starting up or the network is abnormal. |
| After product is powered on, it cannot be started or indicator light is not bright | Check power connection and ensure the router is receiving power. |
| Function keys of the product do not work properly | Try restarting the router. If the issue persists, a factory reset may be needed. |
| The Internet cannot be set after the product is started | Ensure correct network cable connection and proper broadband account details. |
| The product cannot connect to Wi-Fi after startup | Verify Wi-Fi name and password. Check indicator light status. |
Common Questions & Answers
- Q: Why can't I access the Internet after completing the Internet Settings?
-
- Confirm whether you can find the router's Wi-Fi network on your mobile phone. If not, ensure the router is powered on and has completed its startup.
- Connect your mobile phone to the router's Wi-Fi.
- Visit
miwifi.comin your browser. - Try to resolve the issue according to the network diagnosis results provided on the page.
- Q: How do I restore my router to factory settings?
-
- Ensure the router has completed its startup.
- Press and hold the RESET button on the router for more than 5 seconds. Release the RESET key when the indicator light turns orange.
Note: After resetting, the router will revert to factory settings, and you will need to reconfigure it.
- Q: What should I do if I forget the router's administrative password?
-
If no special settings were made, the management password will be the same as the Wi-Fi password. Try logging in with your Wi-Fi password. If the problem persists, it is recommended to restore the router to factory settings and set up the internet connection again.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Wireless Router |
| Product Model | RD18 (Be5000) |
| Brand Name | XIAOMI |
| Wireless Communication Standard | 802.11.be (WiFi 7) |
| Wireless Transmission Rate | 5000M (5011Mbps) |
| Frequency Band Class | Dual-Band (5 GHz) |
| Antenna Type | Fixed |
| Support Mesh | Yes |
| WAN/LAN Ports | 1G network ports, 2.5G network port (automatic identification) |
| With Modem Function | No |
| Type | Wired (for connections) |
| Recommended Uses | Home |
| Manufacturer | Beijing Xiaomi Electronics Product Co., Ltd. |
| Origin | Mainland China |
9. User Tips
- Manual Port Selection: During initial setup, if you experience internet connectivity issues after power cycles, manually select the correct input port (WAN/LAN) in the router's settings to prevent signal misdirection and potential internet blocking by your provider.
- Plug Type: Ensure you have the correct plug type (e.g., EU Plug, US Plug, UK adapter, AU adapter) for your region to avoid compatibility issues.
- 2.5G Port Usage: Note that typically only one WAN port is 2.5 GB/s capable. Connect your high-speed internet line to this specific port for optimal performance.
10. Warranty and Support
For detailed warranty information, please refer to the official Xiaomi warranty policy provided with your purchase or on the official Xiaomi website.
Manufacturer: Beijing Xiaomi Electronics Product Co., Ltd.
Service Hotline: 400-100-5678
Service Website: www.mi.com/service
For a comprehensive guide and additional documentation, please refer to the official User Manual (PDF) available here.