1. Product Introduction
The Milfra X5 Multi-Mode Wired Gateway serves as the central control unit for your smart home. It enables intelligent devices utilizing Zigbee and Bluetooth Mesh technologies to interconnect and communicate seamlessly. This gateway allows for flexible and diverse system combinations, facilitating remote control of smart home devices via your mobile phone and enabling advanced automation scenarios. Examples include automatic light activation upon entry, appliance shutdown when leaving home, and detection/alerting of abnormal events. This product is designed for indoor use only.
2. Package Contents
Upon unboxing your Milfra X5 Multi-Mode Wired Gateway, please verify that all the following items are included:
- Milfra X5 Multi-Mode Wired Gateway (Main Unit)
- Power Adapter (Available in EU or US plug types)
- Ethernet Cable (CAT 6E, typically 1.5M or 2M)
- User Manual (This document)
3. Product Overview
3.1. Device Layout and Ports
- Reset Button: Long press to restore the device to factory settings.
- Network Port (LAN): Insert an Ethernet cable here for wired network connection.
- Upgrade Interface: Used for debugging the device and upgrading its software.
- Third-Party Sub-Device Access: Provides functionality for connecting dedicated third-party sub-modules.
- Power Interface (DC IN): Insert the power adapter here to supply power to the product.
- USB1/USB2 Ports: For potential future expansion or specific accessory connections.
3.2. Indicator Light Description
The gateway features two indicator lights: a network status indicator and a set-up net indicator. Their different states convey various operational conditions.
| Indicator Type | Light State | Status |
|---|---|---|
| Network Status Indicator Light | Lights Out | Network is disconnected |
| Long Bright | Network is connected | |
| Flickering | Sub-device waiting to join network | |
| Set-up Net Indicator Light | Lights Out | Device is activated |
| Long Bright | Device is inactive | |
| Flickering | Activated device is not networked |
4. Setup
4.1. Connecting to the Tuya Smart App
The Milfra X5 Gateway integrates with the Tuya Smart Life platform, allowing you to control smart devices and enable interoperability with other products.
- Download the App: Scan the QR code below or search for "Smart Life" in your mobile app store to download and install the app. If you already have the Smart Life app installed, you may be directed to the device connection page directly.
- Add Device: Open the Smart Life app. On the home page, tap the "+" icon in the upper right corner to enter the "Add Device" page.
- Select Gateway: Navigate to "Gateway Central Control" and then select "Wired Gateway".
- Follow Prompts: Follow the on-screen instructions within the app to complete the device addition process.
Important Tips for Connection:
- Before adding the device, ensure your mobile phone is connected to a 2.4GHz Wi-Fi network.
- For a smooth connection, keep your mobile phone close to the gateway.
- Ensure both your mobile phone and the gateway are connected to the same Wi-Fi network.
- Due to potential app updates, actual operations might slightly differ from this description. Always follow the instructions provided within the current Smart Life App.
5. Operation
5.1. Smart Home Control and Automation
The Milfra X5 Gateway allows you to:
- Add Sub-Devices: Integrate Zigbee and Bluetooth Mesh sub-devices into your smart home system. The gateway supports adding sub-devices even without direct network access for the sub-devices themselves, ensuring stable control of up to 400 devices.
- Remote Control: Control your smart home devices from anywhere using the Smart Life app on your mobile phone.
- Scenario Linkage and Automation: Create custom automation rules and scenarios. For example, set lights to turn on automatically when you arrive home, or turn off appliances when you leave.
- Voice Control: The Tuya Zigbee hub supports voice control via popular assistants like Amazon Alexa and Google Home.
5.2. Replacing a Damaged Gateway
The gateway supports a function to replace a damaged unit and migrate data. This feature requires both hardware and firmware support. Data migration may not be possible between gateways of different types or those with different Product IDs (PIDs).
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the gateway. Avoid using liquid cleaners or aerosols.
- Environment: Keep the device in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
- Software Updates: Periodically check the Smart Life app for firmware updates for your gateway to ensure optimal performance and access to new features. The upgrade interface can be used for debugging and software upgrades if needed.
- Power Cycle: If the device is unresponsive, try unplugging the power adapter, waiting for 10 seconds, and then plugging it back in.
7. Troubleshooting
- Gateway Not Connecting to Network:
- Check the network status indicator light (refer to Section 3.2). If it's off, the network is disconnected.
- Ensure the Ethernet cable is securely connected to the network port and your router.
- Verify your router is functioning correctly and providing internet access.
- Confirm your mobile phone is connected to a 2.4GHz Wi-Fi network during setup.
- Sub-Devices Not Connecting:
- Check the set-up net indicator light (refer to Section 3.2). If it's flickering, sub-devices are waiting to join.
- Ensure sub-devices are in pairing mode as per their respective manuals.
- Keep sub-devices within range of the gateway during pairing.
- "Not Authorized" Error for 4-Button Switch:
- This may indicate a compatibility issue with specific device models or a limitation within the Tuya platform's authorization process for certain device types. Verify the switch's compatibility with the Tuya ecosystem.
- Gateway Unresponsive:
- Try performing a soft reset by unplugging and replugging the power adapter.
- If the issue persists, perform a factory reset by long-pressing the reset button (refer to Section 3.1). Note that this will erase all configurations.
- Data Migration Issues During Gateway Replacement:
- Ensure both the old and new gateways support the "replace faulty gateway" function.
- Data migration is not guaranteed between gateways of different types or PIDs. You may need to re-pair all devices manually if migration fails.
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Milfra |
| Model Number | X5 |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| Connectivity | Zigbee 3.0, Bluetooth Mesh, Wired Ethernet |
| Max Devices Supported | Up to 400 |
| Package Length | 20 cm |
| Package Width | 25 cm |
| Package Height | 8 cm |
| Package Weight | 0.53 kg |
8.1. Hazardous Substances Declaration
This table is prepared in accordance with SJ/T 11364 regulations regarding hazardous substances in electronic products.
| Part Name | Lead (PB) | Mercury (HG) | Cadmium (CD) | Hexavalent Chromium (CR (VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Plastic Parts | O | O | O | O | O | O |
| Hardware Parts | O | O | O | O | O | O |
| Electronic Components | O | O | O | O | O | O |
| Accessories | X | O | O | O | O | O |
O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T 26572.
X: Indicates that the hazardous substance exceeds the limit requirements specified in GB/T 26572 in at least one homogeneous material of the part.
9. User Tips
- Extended Range: The Milfra X5 gateway is noted for its great range, potentially eliminating the need for additional hubs in larger homes. Its external antennas contribute to better signal coverage compared to models without them.
- Fast Responsiveness: Zigbee devices connected through this gateway generally exhibit fast response times, enhancing the smart home experience.
- Optimal Connection: For the best setup and connection experience, ensure your mobile phone is connected to a 2.4GHz Wi-Fi network and keep it physically close to the gateway. Both devices should be on the same Wi-Fi network during the initial setup.
- Gateway Replacement Considerations: If you plan to replace an existing gateway, be aware that not all gateways support the direct "replace faulty gateway" function. This feature relies on specific hardware and firmware compatibility. If direct data migration is not supported, you may need to re-initialize and re-pair all your Zigbee devices with the new gateway.
10. Warranty and Support
Milfra provides after-sales service for the X5 Multi-Mode Wired Gateway in strict accordance with relevant consumer protection laws. The service includes return, exchange, and maintenance, which must be processed with a valid invoice.
10.1. Warranty Policy
| Service Type | Service Policy |
|---|---|
| Return of Goods | Within 7 days from the day after receipt for product quality reasons. |
| Exchange | Within 15 days from the day after receipt for product quality reasons. |
| Maintenance | For 1 year from the day after receipt for product quality reasons. |
For detailed information regarding product performance failures and specific conditions for service, please refer to the official product documentation or contact Milfra customer support.
10.2. Additional Resources
A comprehensive user manual in PDF format is also available for download. You can find it at the following link: Milfra X5 Gateway User Manual (PDF).