1. Introduction
Thank you for purchasing the Wecus European Style Iron Floor Lamp. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new floor lamp. Please read this manual thoroughly before use and retain it for future reference.
2. Package Contents
Before assembly, please ensure all parts are present and undamaged:
- Lamp Head (1)
- Upper Pole (2)
- Middle Pole (3)
- Lower Pole (4)
- Base (6)
- Base Screw (5)
- Lamp Head Screw (5)
- Power Cord with On/Off Switch
3. Setup and Assembly
Follow these steps to assemble your floor lamp:
- Attach Lower Pole to Base: Secure the Lower Pole (4) to the Base (6) using the Base Screw (5). Ensure it is tightened firmly.
- Connect Middle Pole: Screw the Middle Pole (3) onto the top of the Lower Pole (4).
- Connect Upper Pole: Screw the Upper Pole (2) onto the top of the Middle Pole (3).
- Attach Lamp Head: Secure the Lamp Head (1) to the top of the Upper Pole (2) using the Lamp Head Screw (5).
- Install Bulb: Insert an E27 bulb (not included) into the lamp head socket. Do not exceed the maximum wattage specified in the specifications section.
- Connect Power: Plug the lamp into an appropriate wall outlet. Ensure the plug type matches your region (US, UK, or Euro plug).


4. Operating Instructions
- Power On/Off: Use the inline button switch located on the power cord to turn the lamp on or off.
- Adjusting Height: The lamp body features an adjustable mechanism allowing you to raise or lower its height between 145cm and 180cm. Loosen the adjustment knob, set to desired height, and tighten securely.
- Adjusting Lampshade Angle: The lampshade can be rotated 0°-180° to direct light as needed. Gently adjust the lampshade to your preferred angle.


5. Maintenance
- Cleaning: Disconnect the lamp from power before cleaning. Wipe the lamp body and lampshade with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it. Unscrew the old E27 bulb and screw in a new one.
- Inspection: Periodically check the power cord for any damage. If the cord is damaged, discontinue use and contact customer support.
6. Troubleshooting
- Lamp Does Not Turn On:
- Check if the power cord is securely plugged into the wall outlet.
- Ensure the wall outlet is functional (test with another appliance).
- Verify that the bulb is correctly installed and not burnt out.
- Check the inline switch to ensure it is in the 'On' position.
- Light Flickers:
- Ensure the bulb is screwed in tightly.
- Try a different E27 bulb to rule out a faulty bulb.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | retro light |
| Voltage | AC 90 - 260 V |
| Light Source | E27 bulb * 1 (not included) |
| Wattage | 31 - 40 W (Max) |
| Luminous Flux | 249 - 2000 Lumens (bulb dependent) |
| Material | Iron (Body, Base, Lampshade) |
| Finish | Iron, Forged |
| Dimensions (Adjustable) | Height: 145 - 180 cm; Width: 94 cm; Base Diameter: 30 cm; Lampshade Diameter: 30 cm |
| Lighting Area | 5 - 10 square meters |
| Switch Type | Button Switch (inline) |
| Certification | CE |
| Warranty | 2 years |

8. User Tips
- Bulb Choice: Since the bulb is not included, choose an E27 LED bulb with the desired brightness (lumens) and color temperature (warm white, cool white) to best suit your room's ambiance.
- Voltage Compatibility: This lamp supports a wide voltage range (AC 90-260V), making it compatible with most international electrical systems, including 110V and 220V regions.
- Plug Type: Ensure you select the correct plug type (US, UK, or Euro) for your region during purchase.
- Light Intensity: The overall brightness of the lamp depends entirely on the E27 bulb you install. For stronger light, choose a bulb with higher lumen output.
9. Warranty and Support
This Wecus floor lamp comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or replacement parts, please contact the seller directly through your purchase platform.
For additional detailed instructions and diagrams, please refer to the official user manual PDF available for download: View User Manual (PDF)